Light-Matter Interactions in Cesium Lead Halide Perovskite Nanowire Lasers.

Light-matter interactions in inorganic perovskite nanolasers are investigated using single-crystalline cesium lead halide (CsPbX3, X = Cl, Br, and I) nanowires synthesized by the chemical vapor transport method. The perovskite nanowires exhibit a uniform growth direction, smooth surfaces, straight end facets, and homogeneous composition distributions. Lasing occurs in the perovskite nanowires at low thresholds (3 μJ/cm(2)) with high quality factors (Q = 1200-1400) under ambient atmospheric environments.

CoSe₂ and NiSe₂ Nanocrystals as Superior Bifunctional Catalysts for Electrochemical and Photoelectrochemical Water Splitting.

Catalysts for oxygen evolution reactions (OER) and hydrogen evolution reactions (HER) are central to key renewable energy technologies, including fuel cells and water splitting. Despite tremendous effort, the development of low-cost electrode catalysts with high activity remains a great challenge. In this study, we report the synthesis of CoSe2 and NiSe2 nanocrystals (NCs) as excellent bifunctional catalysts for simultaneous generation of H2 and O2 in water-splitting reactions.

Red-to-Ultraviolet Emission Tuning of Two-Dimensional Gallium Sulfide/Selenide.

Graphene-like two-dimensional (2D) nanostructures have attracted significant attention because of their unique quantum confinement effect at the 2D limit. Multilayer nanosheets of GaS-GaSe alloy are found to have a band gap (Eg) of 2.0-2.

Reversible Halide Exchange Reaction of Organometal Trihalide Perovskite Colloidal Nanocrystals for Full-Range Band Gap Tuning.

In recent years, methylammonium lead halide (MAPbX3, where X = Cl, Br, and I) perovskites have attracted tremendous interest caused by their outstanding photovoltaic performance. Mixed halides have been frequently used as the active layer of solar cells, as a result of their superior physical properties as compared to those of traditionally used pure iodide. Herein, we report a remarkable finding of reversible halide-exchange reactions of MAPbX3, which facilitates the synthesis of a series of mixed halide perovskites.

Zn₃P₂-Zn₃As₂ solid solution nanowires.

Semiconductor alloy nanowires (NWs) have recently attracted considerable attention for applications in optoelectronic nanodevices because of many notable properties, including band gap tunability. Zinc phosphide (Zn3P2) and zinc arsenide (Zn3As2) belong to a unique pseudocubic tetragonal system, but their solid solution has rarely been studied. Here In this study, we synthesized composition-tuned Zn3(P1-xAsx)2 NWs with different crystal structures by controlling the growth conditions during chemical vapor deposition.

High-turnover visible-light photoreduction of CO2 by a Re(I) complex stabilized on dye-sensitized TiO2.

Hybrid systems prepared by fixing a Re(i) complex and a dye on three types of TiO2 nanoparticles in two different ways commonly revealed persistent photocatalysis of the CO2 reduction to CO with no levelling-off tendency under visible-light irradiation in DMF, giving a turnover number of ≥435.

Laser-induced graphitization of colloidal nanodiamonds for excellent oxygen reduction reaction.

Graphitized nanodiamonds were conveniently prepared by the laser irradiation of colloidal solution using various solvents. The nanodiamonds were converted into a fully graphitized onion-like structure, which became a cage-like mesoporous structure by the degradation of graphitic layers. Alcohols, acetone, and acetonitrile are more efficient solvents for the graphitization compared to water and hydrocarbons.

Phase evolution of tin nanocrystals in lithium ion batteries.

Sn-based nanostructures have emerged as promising alternative materials for commercial lithium-graphite anodes in lithium ion batteries (LIBs). However, there is limited information on their phase evolution during the discharge/charge cycles. In the present work, we comparatively investigated how the phases of Sn, tin sulfide (SnS), and tin oxide (SnO2) nanocrystals (NCs) changed during repeated lithiation/delithiation processes.

Tetragonal phase germanium nanocrystals in lithium ion batteries.

Various germanium-based nanostructures have recently demonstrated outstanding lithium ion storage ability and are being considered as the most promising candidates to substitute current carbonaceous anodes of lithium ion batteries. However, there is limited understanding of their structure and phase evolution during discharge/charge cycles. Furthermore, the theoretical model of lithium insertion still remains a challenging issue.

Germanium-tin alloy nanocrystals for high-performance lithium ion batteries.

Germanium-tin (Ge(1-x)Sn(x)) alloy nanocrystals were synthesized using a gas-phase laser photolysis reaction of tetramethyl germanium and tetramethyl tin. A composition tuning was achieved using the partial pressure of precursors in a closed reactor. For x < 0.

Germanium sulfide(II and IV) nanoparticles for enhanced performance of lithium ion batteries.

Germanium sulfide (GeS and GeS2) nanoparticles were synthesized by novel gas-phase laser photolysis and subsequent thermal annealing. They showed excellent cycling performance for lithium ion batteries, with a maximum capacity of 1010 mA h g(-1) after 100 cycles. Metastable tetragonal phase Ge nanoparticles were suggested as active materials for a reversible lithium insertion-extraction process.

Hydrogen and carbon monoxide generation from laser-induced graphitized nanodiamonds in water.

Nanodiamonds (ND) were found to generate hydrogen (H2) and carbon monoxide (CO) from water at a remarkable rate under pulsed laser (532 nm) irradiation. The transformation of diamond structure into graphitic layers takes place to form an onion-like carbon structure. The CO generation suggests the oxidative degradation reaction of graphitic layers, C + H2O → CO + 2H(+) + 2e(-), which produced a unique laser-induced reaction: C + H2O → CO + H2.

Photo-induced cation exchange reaction of germanium chalcogenide nanocrystals synthesized using gas-phase laser photolysis reaction.

Germanium chalcogenide GeS(x)Se(1-x) nanocrystals (NC) were synthesized using a novel gas-phase laser photolysis reaction. The composition was simply controlled by the partial pressure of precursors in a closed reactor. Remarkably, these ligand-free NC undergo the photo-induced cation exchange reaction to produce a series of Cd, Zn, Pb, and Ag chalcogenide NC in aqueous solution, which is governed by the thermodynamic driving force based on solubility.

Charge-selective surface-enhanced Raman scattering using silver and gold nanoparticles deposited on silicon-carbon core-shell nanowires.

The deposition of silver (Ag) or gold (Au) nanoparticles (NPs) on vertically aligned silicon-carbon (Si-C) core-shell nanowires (NWs) produces sensitive substrates for surface-enhanced Raman spectroscopy (SERS). The undoped and 30% nitrogen (N)-doped graphitic layers of the C shell (avg thickness of 20 nm) induce a higher sensitivity toward negatively (-) and positively (+) charged dye molecules, respectively, showing remarkable charge selectivity. The Ag NPs exhibit higher charge selectivity than the Au NPs.

Nanodiamonds as photocatalysts for reduction of water and graphene oxide.

Detonated nanodiamonds (NDs) exhibit remarkable photocatalytic activity towards the hydrogen gas generation upon 532 nm laser pulse irradiation. Hydrogenation dramatically increases the quantum yield, suggesting that hydrogen-terminated sites work as electron reservoirs. NDs can also be used as effective photocatalysts to reduce graphene oxide.

Composition-tuned ZnO--CdSSe core--shell nanowire arrays.

Vertically aligned ZnO--CdSSe core-shell nanocable arrays were synthesized with a controlled composition and shell thickness (10-50 nm) by the chemical vapor deposition on the pregrown ZnO nanowire arrays. They consisted of a composition-tuned single-crystalline wurtzite structure CdS1-xSex (x=0, 0.5, and 1) shell whose [0001] direction was aligned along the [0001] wire axis of the wurtzite ZnO core.

Three-dimensional structure of twinned and zigzagged one-dimensional nanostructures using electron tomography.

Electron tomography and high-resolution transmission electron microscopy were used to characterize the unique three-dimensional (3D) structures of twinned Zn(3)P(2) (tetragonal) and InAs (zinc blende) nanowires synthesized by the vapor transport method. The Zn(3)P(2) nanowires adopt a unique superlattice structure that consists of twinned octahedral slice segments having alternating orientations along the axial [111] direction of a pseudo cubic unit cell. The apexes of the octahedral slice segment are indexed as six equivalent <112> directions at the [111] zone axis.