Utilization of 2D materials in aqueous zinc ion batteries for safe energy storage devices.

Aqueous rechargeable battery has been an intense topic of research recently due to the significant safety issues of conventional Li-ion batteries (LIBs). Amongst the various candidates of aqueous batteries, aqueous zinc ion batteries (AZIBs) hold great promise as a next generation safe energy storage device due to its low cost, abundance in nature, low toxicity, environmental friendliness, low redox potential, and high theoretical capacity. Yet, the promise has not been realized due to their limitations, such as lower capacity compared to traditional LIB, dendrite growth, detrimental degradation of electrode materials structure as ions intercalate/de-intercalate, and gas evolution/corrosion at the electrodes, which remains a significant challenge.

Towards effective recovery of humate as green fertilizer from landfill leachate concentrate by electro-neutral nanofiltration membrane.

Under the environmental sustainability concept, landfill leachate concentrate can be up-cycled as a useful resource. Practical strategy for effective management of landfill leachate concentrate is to recover the existing humate as fertilizer purpose for plant growth. Herein, we designed an electro-neutral nanofiltration membrane to separate the humate and inorganic salts for achieving a sufficient humate recovery from leachate concentrate.

Advances in high-voltage supercapacitors for energy storage systems: materials and electrolyte tailoring to implementation.

To achieve a zero-carbon-emission society, it is essential to increase the use of clean and renewable energy. Yet, renewable energy resources present constraints in terms of geographical locations and limited time intervals for energy generation. Therefore, there is a surging demand for developing high-performance energy storage systems (ESSs) to effectively store the energy during the peak time and use the energy during the trough period.

Dimensionally controlled graphene-based surfaces for photothermal membrane crystallization.

Membrane-based photothermal crystallization - a pioneering technology for mining valuable minerals from seawater and brines - exploits self-heating nanostructured interfaces to boost water evaporation, so achieving a controlled supersaturation environment that promotes the nucleation and growth of salts. This work explores, for the first time, the use of two-dimensional graphene thin films (2D-G) and three dimensional vertically orientated graphene sheet arrays (3D-G) as potential photothermal membranes applied to the dehydration of sodium chloride, potassium chloride and magnesium sulfate hypersaline solutions, followed by salt crystallization. A systematic study sheds light on the role of vertical alignment of graphene sheets on the interfacial, light absorption and photothermal characteristics of the membrane, impacting on the water evaporation rate and on the crystal size distribution of the investigated salts.

Highly stable gold nanolayer membrane for efficient solar water evaporation under a harsh environment.

Interfacial solar water evaporation has attracted tremendous attention for sunlight harvesting for water purification. However, salt formation and stability of the photothermal materials (PTMs) remain a challenge that need addressing before bringing this technology to real-world applications. In this work, a nanoscale thin film of gold (Au) on a polytetrafluoroethylene (PTFE) membrane has been prepared using a magnetic sputtering technique.

Green ammonia synthesis using CeO/RuO nanolayers on vertical graphene catalyst electrochemical route in alkaline electrolyte.

The electrochemical synthesis of ammonia at ambient temperature and pressure has the potential to replace the conventional process for the production of ammonia. However, the low ammonia yield and poor long-term stability of catalysts for the synthesis of ammonia hinders the application of this technology. Herein, we endeavored to tackle this challenge by synthesizing 3-D vertical graphene (VG) on Ni foam a one-step, low-temperature plasma process, which offered high conductivity and large surface area.

Chemically Cross-Linked Graphene Oxide as a Selective Layer on Electrospun Polyvinyl Alcohol Nanofiber Membrane for Nanofiltration Application.

Graphene oxide (GO) nanosheets were utilized as a selective layer on a highly porous polyvinyl alcohol (PVA) nanofiber support via a pressure-assisted self-assembly technique to synthesize composite nanofiltration membranes. The GO layer was rendered stable by cross-linking the nanosheets (GO-to-GO) and by linking them onto the support surface (GO-to-PVA) using glutaraldehyde (GA). The amounts of GO and GA deposited on the PVA substrate were varied to determine the optimum nanofiltration membrane both in terms of water flux and salt rejection performances.

Mechanistic insight into the in vitro toxicity of graphene oxide against biofilm forming bacteria using laser-induced breakdown spectroscopy.

While the cytotoxicity of graphene oxide (GO) has been well established, its bactericidal mechanism, however, has yet to be elucidated to advance GO-based biomedical and environmental applications. In an attempt to better understand the bactericidal action of GO, herein we studied the interactions of GO with Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus cells using physical techniques and chemical probes, respectively. In particular, a novel laser-induced breakdown spectroscopy (LIBS) based elemental fingerprint analysis revealed notable differences between viable and non-viable cells based on the difference in the concentration of trace inorganic elements in complex bacterial systems, which reflect cellular membrane integrity.

Anti-fouling graphene-based membranes for effective water desalination.

The inability of membranes to handle a wide spectrum of pollutants is an important unsolved problem for water treatment. Here we demonstrate water desalination via a membrane distillation process using a graphene membrane where water permeation is enabled by nanochannels of multilayer, mismatched, partially overlapping graphene grains. Graphene films derived from renewable oil exhibit significantly superior retention of water vapour flux and salt rejection rates, and a superior antifouling capability under a mixture of saline water containing contaminants such as oils and surfactants, compared to commercial distillation membranes.

Single-step ambient-air synthesis of graphene from renewable precursors as electrochemical genosensor.

Thermal chemical vapour deposition techniques for graphene fabrication, while promising, are thus far limited by resource-consuming and energy-intensive principles. In particular, purified gases and extensive vacuum processing are necessary for creating a highly controlled environment, isolated from ambient air, to enable the growth of graphene films. Here we exploit the ambient-air environment to enable the growth of graphene films, without the need for compressed gases.

Multifunctional graphene micro-islands: Rapid, low-temperature plasma-enabled synthesis and facile integration for bioengineering and genosensing applications.

Here, we present a rapid, low-temperature (200°C) plasma-enabled synthesis of graphene micro-islands (GMs). Morphological analyses of GMs by scanning electron microscopy (SEM) and atomic force microscopy (AFM) feature a uniform and open-networked array of aggregated graphene sheets. Structural and surface chemical characterizations by Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) support the presence of thin graphitic edges and reactive oxygen functional groups.

High Pseudocapacitive Performance of MnO2 Nanowires on Recyclable Electrodes.

Manganese oxides are promising pseudocapacitve materials for achieving both high power and energy densities in pseudocapacitors. However, it remains a great challenge to develop MnO2 -based high-performance electrodes due to their low electrical conductance and poor stability. Here we show that MnO2 nanowires anchored on electrochemically modified graphite foil (EMGF) have a high areal capacitance of 167 mF cm(-2) at a discharge current density of 0.

Nanocarbon-Coated Porous Anodic Alumina for Bionic Devices.

A highly-stable and biocompatible nanoporous electrode is demonstrated herein. The electrode is based on a porous anodic alumina which is conformally coated with an ultra-thin layer of diamond-like carbon. The nanocarbon coating plays an essential role for the chemical stability and biocompatibility of the electrodes; thus, the coated electrodes are ideally suited for biomedical applications.

Synergistic fusion of vertical graphene nanosheets and carbon nanotubes for high-performance supercapacitor electrodes.

Graphene and carbon nanotubes (CNTs) are attractive electrode materials for supercapacitors. However, challenges such as the substrate-limited growth of CNTs, nanotube bundling in liquid electrolytes, under-utilized basal planes, and stacking of graphene sheets have so far impeded their widespread application. Here we present a hybrid structure formed by the direct growth of CNTs onto vertical graphene nanosheets (VGNS).

Plasma break-down and re-build: same functional vertical graphenes from diverse natural precursors.

Plasmas, the 4(th) state of matter, uniformly transform natural precursors with different chemical composition in solid, liquid, and gas states into the same functional vertical graphenes in a single-step process within a few minutes. Functional vertical graphenes show reliable biosensing properties, strong binding with proteins, and improved adhesion to substrates.

Plasma effects in semiconducting nanowire growth.

Three case studies are presented to show low-temperature plasma-specific effects in the solution of (i) effective control of nucleation and growth; (ii) environmental friendliness; and (iii) energy efficiency critical issues in semiconducting nanowire growth. The first case (related to (i) and (iii)) shows that in catalytic growth of Si nanowires, plasma-specific effects lead to a substantial increase in growth rates, decrease of the minimum nanowire thickness, and much faster nanowire nucleation at the same growth temperatures. For nucleation and growth of nanowires of the same thickness, much lower temperatures are required.