Analysis of plasmon modes in BiSe/graphene heterostructures via electron energy loss spectroscopy.

Topological Insulators (TIs) are promising platforms for Quantum Technology due to their topologically protected surface states (TSS). Plasmonic excitations in TIs are especially interesting both as a method of characterisation for TI heterostructures, and as potential routes to couple optical and spin signals in low-loss devices. Since the electrical properties of the TI surface are critical, tuning TI surfaces is a vital step in developing TI structures that can be applied in real world plasmonic devices.

Spatial Control of 2D Nanomaterial Electronic Properties Using Chiral Light Beams.

Single-layer two-dimensional (2D) nanomaterials exhibit physical and chemical properties which can be dynamically modulated through out-of-plane deformations. Existing methods rely on intricate micromechanical manipulations (., poking, bending, rumpling), hindering their widespread technological implementation.

Spinterface Effects in Hybrid LaSrMnO/SrTiO/C/Co Magnetic Tunnel Junctions.

Orbital hybridization at the Co/C interface been has proved to strongly enhance the magnetic anisotropy of the cobalt layer, promoting such hybrid systems as appealing components for sensing and memory devices. Correspondingly, the same hybridization induces substantial variations in the ability of the Co/C interface to support spin-polarized currents and can bring out a spin-filtering effect. The knowledge of the effects at both sides allows for a better and more complete understanding of interfacial physics.

A Correlative Study of Interfacial Segregation in a Cu-Doped TiNiSn Thermoelectric half-Heusler Alloy.

The performance of thermoelectric materials depends on both their atomic-scale chemistry and the nature of microstructural details such as grain boundaries and inclusions. Here, the elemental distribution throughout a TiNiCuSn thermoelectric material has been examined in a correlative study deploying atom-probe tomography (APT) and electron microscopies and spectroscopies. Elemental mapping and electron diffraction reveal two distinct types of grain boundary that are either topologically rough and meandering in profile or more regular and geometric.

Toward High Selectivity Aniline Synthesis Catalysis at Elevated Temperatures.

In connection with an initiative to enhance heat recovery from the large-scale operation of a heterogeneously catalyzed nitrobenzene hydrogenation process to produce aniline, it is necessary to operate the process at elevated temperatures (>100 °C), a condition that can compromise aniline selectivity. Alumina-supported palladium catalysts are selected as candidate materials that can provide sustained aniline yields at elevated temperatures. Two Pd/AlO catalysts are examined that possess comparable mean Pd particle sizes (∼5 nm) for different Pd loading: 5 wt % Pd/AlO and 0.

Atom Probe Tomography of a Cu-Doped TiNiSn Thermoelectric Material: Nanoscale Structure and Optimization of Analysis Conditions.

Cu-doping and crystallographic site occupations within the half-Heusler (HH) TiNiSn, a promising thermoelectric material, have been examined by atom probe tomography. In particular, this investigation aims to better understand the influence of atom probe analysis conditions on the measured chemical composition. Under a voltage-pulsing mode, atomic planes are clearly resolved and suggest an arrangement of elements in-line with the expected HH (F-43m space group) crystal structure.

The interaction of CO with a copper(ii) chloride oxy-chlorination catalyst.

The interaction of CO with an attapulgite-supported, KCl modified CuCl catalyst has previously been examined using a combination of XANES, EXAFS and DFT calculations. Exposing the catalyst to CO at elevated temperatures leads to the formation of CO as the only identifiable product. However, phosgene production can be induced by a catalyst pre-treatment stage, where the supported CuCl sample is exposed to a diluted stream of dichlorine; subsequent CO exposure at ∼643 K then leads to phosgene production.

Controlling the symmetry of inorganic ionic nanofilms with optical chirality.

Manipulating symmetry environments of metal ions to control functional properties is a fundamental concept of chemistry. For example, lattice strain enables control of symmetry in solids through a change in the nuclear positions surrounding a metal centre. Light-matter interactions can also induce strain but providing dynamic symmetry control is restricted to specific materials under intense laser illumination.

Superferromagnetism and Domain-Wall Topologies in Artificial "Pinwheel" Spin Ice.

For over ten years, arrays of interacting single-domain nanomagnets, referred to as artificial spin ices, have been engineered with the aim to study frustration in model spin systems. Here, we use Fresnel imaging to study the reversal process in "pinwheel" artificial spin ice, a modified square ASI structure obtained by rotating each island by some angle about its midpoint. Our results demonstrate that a simple 45° rotation changes the magnetic ordering from antiferromagnetic to ferromagnetic, creating a superferromagnet which exhibits mesoscopic domain growth mediated by domain wall nucleation and coherent domain propagation.

Oxygen Impurities Link Bistability and Magnetoresistance in Organic Spin Valves.

Vertical crossbar devices based on manganite and cobalt injecting electrodes and a metal-quinoline molecular transport layer are known to manifest both magnetoresistance (MR) and electrical bistability. The two effects are strongly interwoven, inspiring new device applications such as electrical control of the MR and magnetic modulation of bistability. To explain the device functionality, we identify the mechanism responsible for electrical switching by associating the electrical conductivity and the impedance behavior with the chemical states of buried layers obtained by in operando photoelectron spectroscopy.

Grain-by-Grain Compositional Variations and Interstitial Metals-A New Route toward Achieving High Performance in Half-Heusler Thermoelectrics.

Half-Heusler alloys based on TiNiSn are promising thermoelectric materials characterized by large power factors and good mechanical and thermal stabilities, but they are limited by large thermal conductivities. A variety of strategies have been used to disrupt their thermal transport, including alloying with heavy, generally expensive, elements and nanostructuring, enabling figures of merit, ZT ≥ 1 at elevated temperatures (>773 K). Here, we demonstrate an alternative strategy that is based around the partial segregation of excess Cu leading to grain-by-grain compositional variations, the formation of extruded Cu "wetting layers" between grains, and-most importantly-the presence of statistically distributed interstitials that reduce the thermal conductivity effectively through point-defect scattering.

One dimensional transport in silicon nanowire junction-less field effect transistors.

Junction-less nanowire transistors are being investigated to solve short channel effects in future CMOS technology. Here we demonstrate 8 nm diameter silicon nanowire junction-less transistors with metallic doping densities which demonstrate clear 1D electronic transport characteristics. The 1D regime allows excellent gate modulation with near ideal subthreshold slopes, on- to off-current ratios above 10 and high on-currents at room temperature.

Magnetite pollution nanoparticles in the human brain.

Biologically formed nanoparticles of the strongly magnetic mineral, magnetite, were first detected in the human brain over 20 y ago [Kirschvink JL, Kobayashi-Kirschvink A, Woodford BJ (1992) Proc Natl Acad Sci USA 89(16):7683-7687]. Magnetite can have potentially large impacts on the brain due to its unique combination of redox activity, surface charge, and strongly magnetic behavior. We used magnetic analyses and electron microscopy to identify the abundant presence in the brain of magnetite nanoparticles that are consistent with high-temperature formation, suggesting, therefore, an external, not internal, source.

Dynamical Torque in CoxFe3-xO4 Nanocube Thin Films Characterized by Femtosecond Magneto-Optics: A π-Shift Control of the Magnetization Precession.

For spintronic devices excited by a sudden magnetic or optical perturbation, the torque acting on the magnetization plays a key role in its precession and damping. However, the torque itself can be a dynamical quantity via the time-dependent anisotropies of the system. A challenging problem for applications is then to disentangle the relative importance of various sources of anisotropies in the dynamical torque, such as the dipolar field, the crystal structure or the shape of the particular interacting magnetic nanostructures.

The application of inelastic neutron scattering to explore the significance of a magnetic transition in an iron based Fischer-Tropsch catalyst that is active for the hydrogenation of CO.

An iron based Fischer-Tropsch synthesis catalyst is evaluated using CO hydrogenation at ambient pressure as a test reaction and is characterised by a combination of inelastic neutron scattering (INS), powder X-ray diffraction, temperature-programmed oxidation, Raman scattering, and transmission electron microscopy. The INS spectrum of the as-prepared bulk iron oxide pre-catalyst (hematite, α-Fe2O3) is distinguished by a relatively intense band at 810 cm(-1), which has previously been tentatively assigned as a magnon (spinon) feature. An analysis of the neutron scattering intensity of this band as a function of momentum transfer unambiguously confirms this assignment.

Interface Reactions in LSMO-Metal Hybrid Structures.

Perovskites form a class of promising materials for the development of multifunctional devices but require reliable strategies for forming electrical contacts without compromising functionality. We explore the interactions of a range of metal contacts with ferromagnetic oxide La0.7Sr0.

Nanoscale Mapping of the Magnetic Properties of (111)-Oriented La(0.67)Sr(0.33)MnO3.

Spatially resolved analysis of magnetic properties on the nanoscale remains challenging, yet strain and defects on this length-scale can profoundly affect a material's bulk performance. We present a detailed investigation of the magnetic properties of La0.67Sr0.

Beating the Stoner criterion using molecular interfaces.

Only three elements are ferromagnetic at room temperature: the transition metals iron, cobalt and nickel. The Stoner criterion explains why iron is ferromagnetic but manganese, for example, is not, even though both elements have an unfilled 3d shell and are adjacent in the periodic table: according to this criterion, the product of the density of states and the exchange integral must be greater than unity for spontaneous spin ordering to emerge. Here we demonstrate that it is possible to alter the electronic states of non-ferromagnetic materials, such as diamagnetic copper and paramagnetic manganese, to overcome the Stoner criterion and make them ferromagnetic at room temperature.

Determining the electronic performance limitations in top-down-fabricated Si nanowires with mean widths down to 4 nm.

Silicon nanowires have been patterned with mean widths down to 4 nm using top-down lithography and dry etching. Performance-limiting scattering processes have been measured directly which provide new insight into the electronic conduction mechanisms within the nanowires. Results demonstrate a transition from 3-dimensional (3D) to 2D and then 1D as the nanowire mean widths are reduced from 12 to 4 nm.

Formation of octapod MnO nanoparticles with enhanced magnetic properties through kinetically-controlled thermal decomposition of polynuclear manganese complexes.

Polynuclear manganese complexes are used as precursors for the synthesis of manganese oxide nanoparticles (MnO NPs). Altering the thermal decomposition conditions can shift the nanoparticle product from spherical, thermodynamically-driven NPs to unusual, kinetically-controlled octapod structures. The resulting increased surface area profoundly alters the NP's surface-dependent magnetism and may have applications in nanomedicine.

Effects of time of day and acute resistance exercise on platelet activation and function.

The present study was designed to ascertain the interaction between time of day and resistance exercise on platelet activation and function. Ten healthy male subjects (age, 29.3 +/- 4.

Synthesis of H(x)Li(1-x)LaTiO4 from quantitative solid-state reactions at room temperature.

The layered perovskite HLaTiO(4) reacts stoichiometrically with LiOH.H(2)O at room temperature to give targeted compositions in the series H(x)Li(1-x)LaTiO(4). Remarkably, the Li(+) and H(+) ions are quantitatively exchanged in the solid state and this allows stoichiometric control of ion exchange for the first time in this important series of compounds.

Spontaneous assembly and real-time growth of micrometre-scale tubular structures from polyoxometalate-based inorganic solids.

We report the spontaneous and rapid growth of micrometre-scale tubes from crystals of a metal oxide-based inorganic solid when they are immersed in an aqueous solution containing a low concentration of an organic cation. A membrane immediately forms around the crystal, and this membrane then forms micrometre-scale tubes that grow with vast aspect ratios at controllable rates along the surface on which the crystal is placed. The tubes are composed of an amorphous mixture of polyoxometalate-based anions and organic cations.