Spatial analysis of volatile organic compounds using passive samplers in the Rubbertown industrial area of Louisville, Kentucky, USA.

Select volatile organic compounds (VOCs) were measured in the vicinity of chemical facilities and other operations in the Rubbertown industrial area of Louisville, Kentucky (USA) using modified EPA Methods 325A/B passive sampler tubes. Two-week, time-integrated passive samplers were deployed at ten sites which were aggregated into three site groups of varying distances from the Rubbertown area facilities. In comparison to canister data from 2001 to 2005, two of the sites suggested generally lower current VOC levels.

Dataset of polycyclic aromatic hydrocarbon recoveries from a selection of sorbent tubes for thermal desorption-gas chromatography/mass spectrometry analysis.

This dataset contains raw area counts and percent recoveries of polycyclic aromatic hydrocarbon (PAH) standards desorbed from selected sorbent tubes and analyzed using thermal desorption-gas chromatography/mass spectrometry (TD-GC/MS). The results of this study were published in the article "Recovery and reactivity of polycyclic aromatic hydrocarbons collected on selected sorbent tubes and analyzed by thermal desorption-gas chromatography/mass spectrometry" in Journal of Chromatography A [1]. The sorbent tubes studied include stainless steel Carbograph 2TD/1TD, glass quartz wool-Carbograph 2TD, inert-coated stainless steel Carbograph 2TD, glass and stainless steel Tenax TA, PAH (chemical weapons), and glass and stainless steel XRO-440 sorbent tubes.

Recovery and reactivity of polycyclic aromatic hydrocarbons collected on selected sorbent tubes and analyzed by thermal desorption-gas chromatography/mass spectrometry.

This article describes the optimization of methodology for extending the measurement of volatile organic compounds (VOCs) to increasingly heavier polycyclic aromatic hydrocarbons (PAHs) with a detailed focus on recent sorbent tube technology. Although PAHs have lower volatility than compounds such as benzene, toluene, ethylbenzene and xylenes, these semi-volatile compounds can be detected in air and breath samples. For this work, PAHs were captured on sorbent tubes and subsequently analyzed using automated thermal desorption gas chromatography - mass spectrometry (ATD-GC/MS).

Targeted GC-MS analysis of firefighters' exhaled breath: Exploring biomarker response at the individual level.

Biomarker measurements can provide unambiguous evidence of environmental exposures as well as the resultant biological responses. Firefighters have a high rate of occupational cancer incidence, which has been proposed to be linked in part to their increased environmental exposure to byproducts of combustion and contaminants produced during fire responses. In this article, the uptake and elimination of targeted volatile organic compounds were investigated by collecting the exhaled breath of firefighters on sorbent tubes before and after controlled structure burns and analyzing samples using automated thermal desorption-gas chromatography (ATD-GC/MS).

Non-targeted GC/MS analysis of exhaled breath samples: Exploring human biomarkers of exogenous exposure and endogenous response from professional firefighting activity.

A non-targeted analysis workflow was applied to analyze exhaled breath samples collected from firefighters pre- and post-structural fire suppression. Breath samples from firefighters functioning in attack and search positions were examined for target and non-target compounds in automated thermal desorption-GC/MS (ATD-GC/MS) selected ion monitoring (SIM)/scan mode and reviewed for prominent chemicals. Targeted chemicals included products of combustion such as benzene, toluene, xylenes, and polycyclic aromatic hydrocarbons (PAH) that serve as a standard assessment of exposure.

Application of passive sorbent tube and canister samplers for volatile organic compounds at refinery fenceline locations in Whiting, Indiana.

Unlabelled: Select volatile organic compounds (VOCs) in ambient air were measured at four fenceline sites at a petroleum refinery in Whiting, IN, using modified EPA Method 325 A/B with passive tubes and EPA Compendium Method TO-15 with canister samplers. One-week, time-integrated samplers were deployed for 8 weeks with tubes and canister samplers deployed in duplicate. Good precision was obtained from the duplicate tubes (<7%) and duplicate canisters (≤10%) for BTEX, perchloroethylene, and styrene.

Calibration and performance of synchronous SIM/scan mode for simultaneous targeted and discovery (non-targeted) analysis of exhaled breath samples from firefighters.

Traditionally, gas chromatography-mass spectrometry (GC/MS) analysis has used a targeted approach called selected ion monitoring (SIM) to quantify specific compounds that may have adverse health effects. Due to method limitations and the constraints of preparing duplicate samples, the information that could be obtained from separately collecting the full scan chromatogram of the sample has often been sacrificed. However, the hybrid technique called synchronous SIM/scan mode alternates between the two acquisition modes, maintaining the accuracy and sensitivity of SIM for targeted analysis while also providing the full scan chromatogram for discovery of non-target compounds.

Sample integrity evaluation and EPA method 325B interlaboratory comparison for select volatile organic compounds collected diffusively on Carbopack X sorbent tubes.

A sample integrity evaluation and an interlaboratory comparison were conducted in application of U.S. Environmental Protection Agency (EPA) Methods 325A and 325B for diffusively monitoring benzene and other selected volatile organic compounds (VOCs) using Carbopack X sorbent tubes.

South Philadelphia passive sampler and sensor study.

Unlabelled: From June 2013 to March 2015, in total 41 passive sampler deployments of 2 wk duration each were conducted at 17 sites in South Philadelphia, PA, with results for benzene discussed here. Complementary time-resolved measurements with lower cost prototype fenceline sensors and an open-path ultraviolet differential optical absorption spectrometer were also conducted. Minimum passive sampler benzene concentrations for each sampling period ranged from 0.

Spatial analysis of volatile organic compounds in South Philadelphia using passive samplers.

Unlabelled: Select volatile organic compounds (VOCs) were measured in the vicinity of a petroleum refinery and related operations in South Philadelphia, Pennsylvania, USA, using passive air sampling and laboratory analysis methods. Two-week, time-integrated samplers were deployed at 17 sites, which were aggregated into five site groups of varying distances from the refinery. Benzene, toluene, ethylbenzene, and xylene isomers (BTEX) and styrene concentrations were higher near the refinery's fenceline than for groups at the refinery's south edge, mid-distance, and farther removed locations.

Volatile organic compounds at two oil and natural gas production well pads in Colorado and Texas using passive samplers.

Unlabelled: A pilot study was conducted in application of the U.S. Environmental Protection Agency (EPA) Methods 325A/B variant for monitoring volatile organic compounds (VOCs) near two oil and natural gas (ONG) production well pads in the Texas Barnett Shale formation and Colorado Denver-Julesburg Basin (DJB), along with a traffic-dominated site in downtown Denver, CO.

South Philadelphia passive sampler and sensor study.

Unlabelled: From June 2013 to March 2015, in total 41 passive sampler deployments of 2 wk duration each were conducted at 17 sites in South Philadelphia, PA, with results for benzene discussed here. Complementary time-resolved measurements with lower cost prototype fenceline sensors and an open-path ultraviolet differential optical absorption spectrometer were also conducted. Minimum passive sampler benzene concentrations for each sampling period ranged from 0.

Relationship between PM2.5 collected at residential outdoor locations and a central site.

Regression models are developed to describe the relationship between ambient PM2.5 (particulate matter [PM] < or = 2.5 microm in aerodynamic diameter) mass concentrations measured at a central-site monitor with those at residential outdoor monitors.

Methodologies for estimating cumulative human exposures to current-use pyrethroid pesticides.

We estimated cumulative residential pesticide exposures for a group of nine young children (4-6 years) using three different methodologies developed by the US Environmental Protection Agency and compared the results with estimates derived from measured urinary metabolite concentrations. The Standard Operating Procedures (SOPs) for Residential Exposure Assessment are intended to provide a screening-level assessment to estimate exposure for regulatory purposes. Nonetheless, dermal exposure estimates were typically lower from the SOP (1-1300 nmol/day) than from SHEDS (5-19,000 nmol/day) or any of the four different approaches for estimating dermal exposure using the Draft Protocol for Measuring Children's Non-Occupational Exposure to Pesticides by all Relevant Pathways (Draft Protocol) (5-11,000 nmol/day).

Multimedia measurements and activity patterns in an observational pilot study of nine young children.

A pilot observational exposure study was performed to evaluate methods for collecting multimedia measurements (air, dust, food, urine) and activity patterns to assess potential exposures of young children to pesticides in their homes. Nine children (mean age=5 years) and their caregivers participated in this study, performed in the Duval County, Florida, in collaboration with the Centers for Disease Control and Prevention and the Duval County Health Department. For all nine children, the total time reported for sleeping and napping ranged from 9.

Comparison of 24 h averaged VOC monitoring results for residential indoor and outdoor air using Carbopack X-filled diffusive samplers and active sampling--a pilot study.

Analytical results obtained by thermal desorption GC/MS for 24 h diffusive sampling of 11 volatile organic compounds (VOCs) are compared with results of time-averaged active sampling at a known constant flow rate. Air samples were collected with co-located duplicate diffusive sampling tubes and one passivated canister. A total of eight multiple-component sampling events took place at fixed positions inside and outside three private homes.

24 h diffusive sampling of toxic VOCs in air onto Carbopack X solid adsorbent followed by thermal desorption/GC/MS analysis-laboratory studies.

Diffusive sampling of a mixture of 42 volatile organic compounds (VOCs) in humidified, purified air onto the solid adsorbent Carbopack X was evaluated under controlled laboratory conditions. The evaluation included variations in sample air temperature, relative humidity and ozone concentration. Linearity of samples with loading was examined both for a constant concentration with time varied up to 24 h and for different concentrations over 24 h.

Measurement of Indoor Air Emissions from Dry-Process Photocopy Machines.

Presently, no standard test method exists to evaluate the various emissions from office equipment (e.g., ozone, volatile organic compounds, inorganic gases, and particulates) so it is difficult to compare data from different studies.