Treatment of Periprosthetic Hip Fractures Vancouver B1 and C: The Significance of Bicortical Fixation. A Bicentric Study Comparing Two Osteosynthesis Systems.

INTRODUCTION The incidence of periprosthetic fractures (PFFs) is estimated to range from 0.1% to 4.1%1, due to the increasing prevalence of joint arthroplasties, coupled with an aging population.

Correlation between cephalic screw positioning of Standard Gamma 3 Nail for intertrochanteric fractures and cut-out incidence.

Introduction: Lateral fractures of proximal femur are the most frequent fractures in elderly people. Internal fixation using medullary nails is the gold standard of treatment (Gamma 3 nail is the most implanted device) due to reduced incidence of complications than other devices. We report our experience in treating this kind of fractures with Gamma 3 nail, between January 2015 and December 2021.

Evolution and New Generation of Dual Mobility Cups.

Although total hip arthroplasty (THA) is considered a successful procedure, hip dislocation remains the main cause of early failure. Dual mobility cups (DMCs) have been shown to significantly reduce the dislocation rate in both primary and revision THAs. During the past several decades, DMCs have evolved in design and fixation interface.

Modular dual mobility articulation in primary and revision hip arthroplasty: lights and shadows.

Purpose: The use of dual mobility cups in total hip arthroplasty has gained popularity in light of the fact it enables to reduce dislocation through increased jumping distance (JD) and impingement-free arc of movement. Modular Dual Mobility Cup (modular DMC) systems have been recently introduced to enable the use of dual mobility cups with standard metal-backed shells. The objective of this study was twofold: calculate the JD for each modular DMC system and conduct a systematic literature review to report clinical outcomes and reasons for failure of this construct.

Intra-Articular Calcaneal Fractures: Comparison between Mini-Invasive Approach and Kirschner Wires vs. Extensive Approach and Dedicated Plate-A Retrospective Evaluation at Long-Term Follow-Up.

Introduction: Calcaneal fractures (CF) are the most common tarsal fractures, representing up to 75% of foot fractures and 2% of all fractures. The aim of this retrospective study is to analyze fixation with Kirschner wires through a mini-invasive approach and dedicated plate and screws through an extended approach at long-term follow-up.

Materials And Methods: Patients were radiographically and clinically evaluated at final follow-up, by using the validated American Orthopedic Foot and Ankle Society (AOFAS) Ankle-Hindfoot score for the clinical-functional assessment, the Short-Form 12 (SF-12) for the physical and psychological domain assessment, and the Visual Analog Scale (VAS) for pain.

Use of dual-mobility cup in primary total hip arthroplasties: an Italian regional register (RIPO) study on three thousand, seven hundred and ten cases.

Purpose: The purpose of the study was to investigate the outcome of dual-mobility cup (DM) compared with a standard cup (SC) in primary total hip arthroplasty (THA) in the long-term follow-up based on a regional Italian joint registry (RIPO).

Methods: The Registry of Prosthetic Orthopaedic Implant (RIPO) was consulted, looking for all primary THAs implanted from 2000 to 2019. Three thousand seven hundred ten were dual-mobility cup (DM) total hip arthroplasties (THA) and 85.

Hip stability parameters with dual mobility, modular dual mobility and fixed bearing in total hip arthroplasty: an analytical evaluation.

Background: Use of dual mobility (DM) in total hip arthroplasty has gained popularity due to the ability to reduce dislocation through increased jumping distance and impingement-free arc of movement. Recently, modular dual mobility (modDM) systems were introduced to give the possibility to use DM with standard metal-backed shells, however few has been studied to date regarding how jumping distance and the center of rotation change with modDM. The objective of this study was to evaluate, through analytical simulation, how jumping distance, center of rotation and arc of movement change between DM and standard cups with modDM or fixed bearings (FB).

Italian Consensus Conference on Guidelines for preoperative treatment in acetabular fractures.

Preoperative management of acetabular fracture is a major problem and no consensus has been reached in literature on the optimal treatment of this problem. We present the results of the First Italian Consensus Conference on Acetabular fracture. An extensive review of the literature has been undertaken by the organizing committee and forwarded to the panel.

Static vs dinamic short nail in pertrochanteric fractures: experience of two center in Northern Italy.

Background: Lateral fractures of proximal femur are the most frequent to treat for the traumatologist surgeon. Intramedullary nailing is the gold standard treatment of this type of fracture. The aim of the study is to analyze the results obtained with the Elos Intrauma nail by the experience of two Departments of Orthopedics and Traumatology ("Guglielmo da Saliceto" Hospital in Piacenza and the Maggiore hospital in Bologna).

Dual mobility cup in hip arthroplasty: An in-depth analysis of joint registries.

Although total hip arthroplasty (THA) has shown successful results, instability remains a major complication. In recent years, dual mobility cups (DMC) have gained interest among clinicians thanks to its low rate of dislocation and good clinical results. The main aim of this work was to describe the accuracy of data on DMC from national and regional joint registries (JRs) and the available worldwide literature.

Revision of a Monoblock Metal-on-Metal Cup Using a Dual Mobility Component: Is It a Reasonable Option?

Revision of large-diameter, monoblock acetabular components for both hip resurfacing arthroplasty and metal-on-metal (MoM) total hip arthroplasty (THA) is correlated to a high amount of complications. For this reason, performing a limited revision by conversion to a dual mobility (DM) without acetabular component exchange has been proposed in order to limit these complications. Although DM bearing offers an easy solution avoiding the intraoperative and time-associated complications, concern about polyethylene wear and stability remains due to the difference regarding the design, the coverage angle and the clearance of the two implants.

Tendon Extracellular Matrix Remodeling and Defective Cell Polarization in the Presence of Collagen VI Mutations.

Mutations in collagen VI genes cause two major clinical myopathies, Bethlem myopathy (BM) and Ullrich congenital muscular dystrophy (UCMD), and the rarer myosclerosis myopathy. In addition to congenital muscle weakness, patients affected by collagen VI-related myopathies show axial and proximal joint contractures, and distal joint hypermobility, which suggest the involvement of tendon function. To gain further insight into the role of collagen VI in human tendon structure and function, we performed ultrastructural, biochemical, and RT-PCR analysis on tendon biopsies and on cell cultures derived from two patients affected with BM and UCMD.

Neglected pulmonary thromboembolism in a traumatic anterior hip dislocation: A case report.

We report the case of treatment delay for an early onset of pulmonary embolism due to thrombosis in the femoral vein occurred in a traumatic anterior hip dislocation. Mistakes interpretations of clinical findings and pre-operative chest CT-angiography has endangered our patient's life because of the medical report was focused only on acute traumatic injuries. After all, we were not able to find in the literature any similar report that could explain the pathogenesis of this early onset and help us in the patient management.

Pilon fractures: A new classification system based on CT-scan.

Actually, pilon fractures are classified according to AO and Ruedi Allgower classification systems based on X-rays. These classifications are less reproducible and do not provide necessary information for proper surgical planning. Aim of the study is to (1) propose a new classification system based on CT scan; (2) to check the prognostic value of this classification and (3) to evaluate its reliability and (4) reproducibility.

Orthoplastic surgical collaboration is required to optimise the treatment of severe limb injuries: A multi-centre, prospective cohort study.

Open fractures are severe, complex, limb-threatening and high-energy injuries, often involving lesions of both bone and soft tissues. Traditionally, treatment has been piecemeal by orthopaedic and plastic surgeons. This study aimed to prospectively investigate whether combining orthopaedic and plastic surgery in treating these injuries is more effective than the conventional orthopaedic care.

An uncommon case of irreducible ankle fracture-dislocation: the "Bosworth-like" tibio-fibular fracture.

An irreducible ankle-fracture dislocation characterized by the dislocation of the proximal fragment of the fibula posteriorly to the tibial tubercle is defined as "Bosworth injury". In the present report it is described, for the first time in literature, a complex case where the Bosworth injury was associated to a tibial plafond fracture: the proximal fibular fragment was entrapped between the tibial pilon and the fractured posterior tibial tubercle, which acted as a clamp, thus avoiding ankle reduction. Due to the presence of the tibial fracture, it was not possible to observe the typical radiological signs of Bosworth injury and therefore two unsuccessful reductions were attempted before performing a CT scan that revealed the complexity of the case, that required an immediate ORIF procedure to prevent the onset of complications.

Radiological identification of Zweymüller-type femoral stem prosthesis in revision cases.

Introduction: Since 1979 the number of patients treated with femoral stems has continued to grow, as well as the number of stems with features similar to the Zweymüller prosthesis produced by different companies. Identification can be problematic in case requiring revision. In the present paper, we present an overview of morphometric differences between the different stem designs, which can be useful for radiologic identification in revision cases.

Opening-wedge high tibial osteotomy: a seven - to twelve-year study.

Purpose: medial opening-wedge osteotomy is a widely performed procedure used to treat moderate isolated medial knee osteoarthritis. Historically, the literature has contained reports showing satisfactory mid-term results when accurate patient selection and precise surgical techniques were applied. This study was conducted to investigate the clinical and radiographic seven- to twelve-year results of opening-wedge high tibial osteotomy in a consecutive series of patients affected by varus knee malalignment with isolated medial compartment degenerative joint disease.

Prospective multi-centre study on a composite ceramic femoral component in total knee arthroplasty: Five-year clinical and radiological outcomes.

Background: Enhanced wear resistance of ceramics in general and improved mechanical characteristics of composite ceramics in terms of strength and resistance meet the demands for application in TKA. The aim of this prospective international multi-centre study was to evaluate the 5-year clinical and radiological outcomes of an unconstrained TKA with a composite ceramic femoral component.

Methods: A total of 107 patients (109 knees) underwent TKA with the MULTIGEN-PLUS Ceramic Knee at seven centres in three European countries.

Trabecular orientation in the human femur and tibia and the relationship with lower-limb alignment for patients with osteoarthritis of the knee.

Wolff׳s Law suggests that the orientation of trabeculae in human bone changes in response to altered loading patterns. The aim of this study was to investigate trabecular orientation in both the femur and tibia and to compare this with the mechanical axis of the leg. The study involved analysis of radiographs from patients with osteoarthritis of the knee (n=91).