Physical Properties and Stability of Soft Gelled Chitosan-Based Nanoparticles.

We addressed the role of the degree of acetylation (DA) and of M of chitosan (CS) on the physical characteristics and stability of soft nanoparticles obtained through either ionic cross-linking with sodium tripolyphosphate (TPP), or reverse emulsion/gelation. Each of these methods affords nanoparticles (NPs) or nanogels (NGs), respectively. The size of CS-TPP NPs comprising CS of high M (≈123-266 kDa) increases with DA (≈1.

Fine microstructure of processed chitosan nanofibril networks preserving directional packing and high molecular weight.

Crystalline chitosan nanofibril networks were prepared, preserving the native structural packing and the polymer high molecular weight. The fine microstructure of the nanomaterial, obtained by mild hydrolysis of chitosan (CHI), was characterized by using synchrotron small- and wide-angle X-ray scattering (SAXS and WAXS), transmission electron microscopy (TEM) and electron diffraction. Hydrolysis of chitosan yielded a network of crystalline nanofibrils, containing both allomorphs of chitosan: hydrated and anhydrous.

Physical properties and antibacterial activity of chitosan/acemannan mixed systems.

The aim of the present study was to investigate the mechanical and thermal properties of mixed chitosan-acemannan (CS-AC) mixed gels and the antibacterial activity of dilute mixed solutions of both polysaccharides. Physical hydrogels of chitosan comprising varying amounts of non-gelling acemannan were prepared by controlled neutralization of chitosan using ammonia. As the overall acemannan concentration in the mixed hydrogel increased while fixing that of CS, the mechanical strength decreased.

Multi-membrane chitosan hydrogels as chondrocytic cell bioreactors.

We investigated the bioactivity of new chitosan-based multi-membrane hydrogel (MMH) architectures towards chondrocyte-like cells. The microstructure of the hydrogels constituting the membranes precludes any living cell penetration, whereas their lower scale architecture allows the protein diffusion. The biological behavior of chondrocytes implanted within the MMH inter-membrane spaces was studied for 45 days in culture.

Towards a modular synthesis of well-defined chitooligosaccharides: synthesis of the four chitodisaccharides.

The total chemical synthesis of the four well-defined chitodisaccharides is described using N-trichloroacetyl (TCA) and N-benzyloxycarbonyl (Z) as C-2 protecting groups for acetamido and free amino groups, respectively. The synthesis is carried out according to a strategy that paves way to the elaboration of various homo- and hetero-chitooligosaccharides, with perfect control of the number and the position of GlcN and GlcNAc units along the oligomer chain.

Kinetics study of the solid-state acid hydrolysis of chitosan: evolution of the crystallinity and macromolecular structure.

The heterogeneous hydrolysis of fully deacetylated chitosan solid samples was carried out with concentrated HCl. The hydrolysis kinetics was studied at different temperatures and HCl concentrations. From 5 to 50 degrees C in the hydrolysis time range up to 50 h, a monomodal distribution of molecular weights was observed connected to the only degradation of amorphous domains.

Self-assemblies on chitosan nanohydrogels.

Nanohydrogels of pure chitosan, containing neither potentially toxic solvent nor chemical cross-linker, were obtained by an ammonia-induced physical gelation of a reverse emulsion of a chitosan solution in a triglyceride mixture as an organic phase. The resulting colloids were obtained with a controlled size distribution and displayed a positive surface charge. Assemblies with various macromolecules were investigated as a first step toward new nano-carriers for bioactive molecules.

Continuum of structural organization from chitosan solutions to derived physical forms.

The structural organization of chitosan, a cationic polyelectrolyte, in aqueous solutions of high ionic strength, is investigated by quasi-elastic light scattering and wet scanning transmission electron microscopy. The formation of submicrometric chain aggregates driven by hydrophobic interactions is evidenced. These heterogeneities are at the core of the multiscale morphology of physical hydrogels processed from this polysaccharide.

Polysaccharide-based vaccine delivery systems: Macromolecular assembly, interactions with antigen presenting cells, and in vivo immunomonitoring.

Using a strategy of macromolecular assembly, a colloidal vaccine delivery system was obtained from chitosan and dextran sulfate and loaded with an antigenic protein (p24, the capsid protein of HIV-1). The colloidal polyelectrolyte complexes (PECs) were obtained by charge neutralization of the polyanion and polycation at a charge ratio (n(+)/n(-)) of 2 (CHDS). The conditions of assembly were tuned to maintain the colloidal properties of the carrier in high salt environment.

Synthesis and structural characterization of chitosan nanogels.

Colloidal physical gels of pure chitosan were obtained via an ammonia-induced gelation in a reverse phase emulsion. The water weight fraction and the chitosan concentration in the water phase were optimized so as to yield nanogels with controlled particle size and size distribution. The spherical morphology of the nanogels was established by transmission electron microscopy with negative staining.

Structure of natural polyelectrolyte solutions: role of the hydrophilic/hydrophobic interaction balance.

A method allowing the evaluation of the solvophilic/solvophobic character of polyelectrolytes from their conformation in solution is discussed. Analyzed systems are salt-free aqueous solutions of natural copolysaccharides with controlled chemical structures. Small-angle X-ray scattering diagrams revealed their conformation by the "polyelectrolyte peak".

Mechanisms involved during the ultrasonically induced depolymerization of chitosan: characterization and control.

The existence of two mechanisms involved in the ultrasonically induced depolymerization of chitosan is evidenced. The first leads to a rapid scission of polymer chains and a lowering of the polydispersity, and the second is responsible for obtaining short polymer chains and oligomers with a polydispersity increase. A systematic experimental study allowed us to identify and quantify the main parameters influencing the chain scission kinetics.

A novel synthesis of chitosan nanoparticles in reverse emulsion.

Physical hydrogels of chitosan in the colloidal domain were obtained in the absence of both cross-linker and toxic organic solvent. The approach was based on a reverse emulsion of a chitosan solution in a Miglyol/Span 80 mixture, generally regarded as safe. Temperature and surfactant concentration were optimized, and the impact of the degree of acetylation (DA) and the molar mass of chitosan was investigated.

Chemical preparation and structural characterization of a homogeneous series of chitin/chitosan oligomers.

The preparation of a homogeneous series of chitin/chitosan oligomers (chito-oligomers) with the same distribution of degrees of polymerization (DP) ranging from 2 to 12, but with various average degrees of N-acetylation (DA) from 0 to 90% is described. This DA-series was obtained according to a two-step chemical process involving (i) the production of a well-defined mixture of glucosamine (GlcN) oligomers obtained by acid hydrolysis of a fully N-deacetylated chitosan and after selective precipitations of the hydrolysis products, and (ii) the partial N-acetylation of the GlcN units of these oligomers from a hydro-alcoholic solution of acetic anhydride in a controlled manner. The characterization of this series of samples with different DAs by proton nuclear magnetic resonance (1H NMR) spectroscopy and matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) allowed us to determine their average DA and identify the main oligomer structures constituting each mixture.

Multi-membrane hydrogels.

Polysaccharide-based hydrogels are useful for numerous applications, from food and cosmetic processing to drug delivery and tissue engineering. The formation of hydrogels from polyelectrolyte solutions is complex, involving a variety of molecular interactions. The physical gelation of polysaccharides can be achieved by balancing solvophobic and solvophilic interactions.

Towards biocompatible vaccine delivery systems: interactions of colloidal PECs based on polysaccharides with HIV-1 p24 antigen.

This work reports on the interactions of a model protein (p24, the capside protein of HIV-1 virus) with colloids obtained from polyelectrolyte complexes (PECs) involving two polysaccharides: chitosan and dextran sulfate (DS). The PECs were elaborated by a one-shot addition of default amounts of one counterpart to the polymer in excess. Depending on the nature of the excess polyelectrolyte, the submicrometric colloid was either positively or negatively charged.

Evaluation of chitosans and Pichia guillermondii as growth inhibitors of Penicillium digitatum.

Chitosans were obtained by room-temperature-homogeneous-deacetylation (RTHD) and freeze-pump-out-thaw-heterogeneous-deacetylation (FPT) from chitins purified from fermentations. Commercial chitosan was deacetylated by three-FPT-cycles. Chitosans and Pichia guillermondii were evaluated on the growth of Penicillium digitatum.

Polyelectrolyte complexes from polysaccharides: formation and stoichiometry monitoring.

Colloids were obtained from non-stoichiometric polyelectrolyte complexes with two polysaccharides of opposite charge: chitosan and dextran sulfate (DS) as the polycation and polyanion, respectively. The complexes were elaborated by a one-shot addition of the polymer in default to the one in excess. The colloids were positively or negatively charged according to the nature of the polymer in excess.

The use of physical hydrogels of chitosan for skin regeneration following third-degree burns.

Skin repair is an important field of the tissue engineering, especially in the case of extended third-degree burns, where the current treatments are still insufficient in promoting satisfying skin regeneration. Bio-inspired bi-layered physical hydrogels only constituted of chitosan and water were processed and applied to the treatment of full-thickness burn injuries. The aim of the study was at assessing whether this material was totally accepted by the host organism and allowed in vivo skin reconstruction of limited area third-degree burns.

Thermodynamic aspects of the heterogeneous deacetylation of beta-chitin: reaction mechanisms.

This paper aims at giving a better understanding of the reaction mechanisms involved in the heterogeneous deacetylation of beta-chitin in relation with the influence of soda concentration (30-55% (w/v)) and the type of sodium hydroxide hydrates formed in solution. The role of temperature (35-110 degrees C) and of the amount of sodium acetate generated in the reaction medium was also investigated. We demonstrated that the type of soda hydrate formed before deacetylation starts and its relative abundance drive the reaction efficiency.

Polyelectrolyte microstructure in chitosan aqueous and alcohol solutions.

This work deals with chain ordering in aqueous and water-alcohol solutions of chitosan. The so-called polyelectrolyte peak is investigated by small-angle synchrotron X-ray scattering. The polyelectrolyte microstructure was characterized by the position of the maximum of the polyelectrolyte scattering peak qmax, which scales with the polymer concentration cp as qmax approximately cp alpha.

Morphology and mechanical properties of chitosan fibers obtained by gel-spinning: influence of the dry-jet-stretching step and ageing.

The morphology and mechanical properties of chitosan fibers obtained by gel-spinning are reported. The objectives were both to understand how the microstructure of the fibers could be modified and how the mechanical properties were improved by means of a dry-jet-stretching step. A highly deacetylated chitosan (degree of acetylation=2.

Pseudo-dry-spinning of chitosan.

A pseudo-dry-spinning process of chitosan without any use of organic solvent or cross-linking agent was studied. A highly deacetylated chitosan (degree of acetylation=2.7%) from squid-pens, with a high weight-average molecular weight (M(W)=540,000 g/mol) was used.

A material decoy of biological media based on chitosan physical hydrogels: application to cartilage tissue engineering.

The cartilage tissue has a limited self-regenerative capacity. Tissue-engineering represents a promising trend for cartilage repair. The present study was aimed to develop a biomaterial formulation by combining fragments of chitosan hydrogel with isolated rabbit or human chondrocytes.