Polyurethane/-Octadecane Phase-Change Microcapsules via Emulsion Interfacial Polymerization: The Effect of Paraffin Loading on Capsule Shell Formation and Latent Heat Storage Properties.

Organic phase-change materials (PCMs) hold promise in developing advanced thermoregulation and responsive energy systems owing to their high latent heat capacity and thermal reliability. However, organic PCMs are prone to leakages in the liquid state and, thus, are hardly applicable in their pristine form. Herein, we encapsulated organic PCM -Octadecane into polyurethane capsules via polymerization of commercially available polymethylene polyphenylene isocyanate and polyethylene glycol at the interface oil-in-water emulsion and studied how various -Octadecane feeding affected the shell formation, capsule structure, and latent heat storage properties.

Graphene oxide-polyamine preprogrammable nanoreactors with sensing capability for corrosion protection of materials.

Corrosion is one of the major issues for sustainable manufacturing globally. The annual global cost of corrosion is US$2.5 trillion (approximately 3.

Laser Derived Electron Transport Layers with Embedded p-n Heterointerfaces Enabling Planar Perovskite Solar Cells with Efficiency over 25.

Electron transport layers (ETLs) with pronounced electron conducting capability are essential for high performance planar perovskite photovoltaics, with the great challenge being that the most widely used metal oxide ETLs unfortunately have intrinsically low carrier mobility. Herein is demonstrated that by simply addressing the carrier loss at particle boundaries of TiO ETLs, through embedding in ETL p-n heterointerfaces, the electron mobility of the ETLs can be boosted by three orders of magnitude. Such embedding is encouragingly favorable for both inhibiting the formation of rutile phase TiO in ETL, and initiating the growth of high-quality perovskite films with less defect states.

Autonomic self-regulating systems based on polyelectrolyte microcapsules and microgel particles.

Biological systems possess unique non-equilibrium functions, maintaining tight manipulation of their surroundings through inter-communication of multiple components and self-regulatory capability organized over different length scales. However, most artificial materials are incapable of communicating and self-regulating behavior due to their limited number of component and direct responsive modes. Herein, a new integrated self-regulation system is developed utilizing stimuli-responsive polyelectrolyte capsules as building blocks.

Phase-Change Microcapsules with a Stable Polyurethane Shell through the Direct Crosslinking of Cellulose Nanocrystals with Polyisocyanate at the Oil/Water Interface of Pickering Emulsion.

Phase-change materials (PCMs) attract much attention with regard to their capability of mitigating fossil fuel-based heating in in-building applications, due to the responsive accumulation and release of thermal energy as a latent heat of reversible phase transitions. Organic PCMs possess high latent heat storage capacity and thermal reliability. However, bare PCMs suffer from leakages in the liquid form.

Natural Nanoclay-Based Silver-Phosphomolybdic Acid Composite with a Dual Antimicrobial Effect.

The problem of microbial growth on various surfaces has increased concern in society in the context of antibiotic misuse and the spreading of hospital infections. Thus, the development of new, antibiotic-free antibacterial strategies is required to combat bacteria resistant to usual antibiotic treatments. This work reports a new method for producing an antibiotic-free antibacterial halloysite-based nanocomposite with silver nanoparticles and phosphomolybdic acid as biocides, which can be used as components of smart antimicrobial coatings.

Activating a Semiconductor-Liquid Junction via Laser-Derived Dual Interfacial Layers for Boosted Photoelectrochemical Water Splitting.

The semiconductor-liquid junction (SCLJ), the dominant place in photoelectrochemical (PEC) catalysis, determines the interfacial activity and stability of photoelectrodes, whcih directly affects the viability of PEC hydrogen generation. Though efforts dedicated in past decades, a challenge remains regarding creating a synchronously active and stable SCLJ, owing to the technical hurdles of simultaneously overlaying the two advantages. The present work demonstrates that creating an SCLJ with a unique configuration of the dual interfacial layers can yield BiVO photoanodes with synchronously boosted photoelectrochemical activity and operational stability, with values located at the top in the records of such photoelectrodes.

Multifunctional ZnO-CoO @ polymer hybrid nanocoatings with controlled adsorption, photocatalytic and anti-microbial functions for polluted water systems.

Triple action pollutant responsive multi-layer hybrid nanocoatings of architecture PEI(PAA/ZnO-CoO) were constructed through ZnO-CoO binary oxide co-precipitation followed by its inclusion in multi-layer polymeric thin films using Layer-by-Layer (LbL) deposition. Characterization of the designed architecture was carried out via FTIR, XRD, UV-Vis, and Raman spectroscopic studies to evaluate the chemical nature, bonding, and crystallographic behavior of ZnO-CoO. Peaks of ZnO-CoO were recorded at 586.

Long-Term Autonomic Thermoregulating Fabrics Based on Microencapsulated Phase Change Materials.

Microcapsules loaded with n-docosane as phase change material (mPCMs) for thermal energy storage with a phase change transition temperature in the range of 36-45 °C have been employed to impregnate cotton fabrics. Fabrics impregnated with 8 wt % of mPCMs provided 11 °C of temperature buffering effect during heating. On the cooling step, impregnated fabrics demonstrated 6 °C temperature increase for over 100 cycles of switching on/off of the heating source.

Sepiolite Nanocarriers as a Matrix for Controlled Thermal Energy Storage.

Applying the eutectic hydrated salt (EHS) mixture of NaHPO·12HO and NaSO·10HO in a 1:1 weight ratio as a phase-change material and natural sepiolite nanocarriers as a matrix, the form-stable phase-change composite EHS@sepiolite was fabricated by vacuum impregnation. Due to the high porosity of sepiolite and its nanofibrous structure with internal channels, the effective loading of the phase-change material reached as high as 88 wt %. The melting temperature of the composite was 38.

Interfacial Embedding of Laser-Manufactured Fluorinated Gold Clusters Enabling Stable Perovskite Solar Cells with Efficiency Over 24.

Tackling the interfacial loss in emerged perovskite-based solar cells (PSCs) to address synchronously the carrier dynamics and the environmental stability, has been of fundamental and viable importance, while technological hurdles remain in not only creating such interfacial mediator, but the subsequent interfacial embedding in the active layer. This article reports a strategy of interfacial embedding of hydrophobic fluorinated-gold-clusters (FGCs) for highly efficient and stable PSCs. The p-type semiconducting feature enables the FGC efficient interfacial mediator to improve the carrier dynamics by reducing the interfacial carrier transfer barrier and boosting the charge extraction at grain boundaries.

Communicating assemblies of biomimetic nanocapsules.

Communication assemblies between biomimetic nanocapsules in a 3D closed system with self-regulating and self-organization functionalities were demonstrated for the first time. Two types of biomimetic nanocapsules, TiO2/polydopamine capsules and SiO2/polyelectrolytes capsules with different stimuli-responsive properties were prepared and leveraged to sense the external stimulus, transmit chemical signaling, and autonomic communication-controlled release of active cargos. The capsules have clear core-shell structures with average diameters of 30 nm and 25 nm, respectively.

Formation Mechanism of Multipurpose Silica Nanocapsules.

Core-shell structures containing active materials can be fabricated using almost infinite reactant combinations. A mechanism to describe their formation is therefore useful. In this work, nanoscale all-silica shell capsules with an aqueous core were fabricated by the HCl-catalyzed condensation of tetraethyl orthosilicate (TEOS), using Pickering emulsion templates.

Laser-Generated Supranano Liquid Metal as Efficient Electron Mediator in Hybrid Perovskite Solar Cells.

Creating colloids of liquid metal with tailored dimensions has been of technical significance in nano-electronics while a challenge remains for generating supranano (<10 nm) liquid metal to unravel the mystery of their unconventional functionalities. Present study pioneers the technology of pulsed laser irradiation in liquid from a solid target to liquid, and yields liquid ternary nano-alloys that are laborious to obtain via wet-chemistry synthesis. Herein, the significant role of the supranano liquid metal on mediating the electrons at the grain boundaries of perovskite films, which are of significance to influence the carriers recombination and hysteresis in perovskite solar cells, is revealed.

Highly Stable Energy Capsules with Nano-SiO Pickering Shell for Thermal Energy Storage and Release.

Phase change materials (PCMs) store latent heat energy as they melt and release it upon freezing. However, they suffer from chemical instability and poor thermal conductivity, which can be improved by encapsulation. Here, we encapsulated a salt hydrate PCM (Mg(NO)·6HO) within all-silica nanocapsules using a Pickering emulsion template.

Effect of Porous Structure on the Microwave Absorption Capacity of Soft Magnetic Connecting Network Ni/AlO/Ni Film.

Microwave radar absorbing materials have been the focus of the radar stealth research field. In this study, ceramic structured porous honeycomb-like AlO film was prepared by anodic oxidation, and an Ni layer was deposited on the AlO film via electrodeposition in a neutral environment to form a flower- and grain-like structure in a three-dimensional (3D) network Ni/AlO/Ni film. The films both have a through-hole internal structure, soft magnetic properties, and absorb microwaves.

Freezing-Induced Loading of TiO into Porous Vaterite Microparticles: Preparation of CaCO/TiO Composites as Templates To Assemble UV-Responsive Microcapsules for Wastewater Treatment.

The photocatalytic degradation of organic molecules is one of the effective ways for water purification. At this point, photocatalytic microreactor systems seem to be promising to enhance the versatility of the photoassisted degradation approach. Herein, we propose photoresponsive microcapsules prepared via layer-by-layer assembly of polyelectrolytes on the novel CaCO/TiO composite template cores.

Unusual Sonochemical Assembly between Carbon Allotropes for High Strain-Tolerant Conductive Nanocomposites.

Facile methods toward strain-tolerant graphene-based electronic components remain scarce. Although being frequently used to disperse low-dimensional carbonaceous materials, ultrasonication (US) has never been reliable for fabricating stretchable carbonaceous nanocomposite (SCNC). Inspired by the unusual sonochemical assembly between graphene oxide (GO) and carbon nanotube (CNT), we verified the roots-like GO-CNT covalent bonding, rather than just π-π conjugation, was formed during US.

The Future of Layer-by-Layer Assembly: A Tribute to ACS Nano Associate Editor Helmuth Möhwald.

Layer-by-layer (LbL) assembly is a widely used tool for engineering materials and coatings. In this Perspective, dedicated to the memory of ACS Nano associate editor Prof. Dr.

Nanocontainer-based self-healing coatings: current progress and future perspectives.

Here, we summarize the recent achievements in the field of the nanocontainer-based self-healing coatings made during the last 8 years. The development of nanocontainer-based self-healing coatings was started 15 years ago from the study of nanocontainers with stimuli-responsive release properties able to release anticorrosion agent (inhibitor) on demand only into a corroded area thus preventing its spontaneous leakage. Since then, many different types of nanocontainers have been demonstrated: from polymer capsules to porous inorganic nanoparticles with sophisticated mechanisms of release triggering.

Mussel-Inspired Self-Healing Coatings Based on Polydopamine-Coated Nanocontainers for Corrosion Protection.

The mussel-inspired properties of dopamine have attracted immense scientific interest for surface modification of nanoparticles due to the high potential of dopamine functional groups to increase the adhesion of nanoparticles to flat surfaces. Here, we report for the first time a novel type of inhibitor-loaded nanocontainer using polydopamine (PDA) as a pH-sensitive gatekeeper for mesoporous silica nanoparticles (MSNs). The encapsulated inhibitor (benzotriazole) was loaded into MSNs at neutral pH, demonstrating fast release in an acidic environment.

Wet-Chemical Synthesis of Surface-Passivated Halide Perovskite Microwires for Improved Optoelectronic Performance and Stability.

One-dimensional (1D) halide perovskite materials with intrinsic high carrier mobility and long diffusion length hold great promises for high-performance optoelectronic devices, in which the passivation of the surface defects is of significance for further boosting its optoelectronic performance as well as its moisture stability. Herein, we demonstrate a simple room-temperature wet-chemical synthetic protocol for perovskite microwires with controlled morphologies and passivated surface states. This strategy allows for facile assembly of hydrophobic 1 H,1 H-perfluorooctylamine (PFA) molecules on the surface of the perovskite microwires owing to the coordination binding between the amino groups of PFA and Pb.

Role of Metal Lattice Expansion and Molecular π-Conjugation for the Magnetic Hardening at Cu-Organics Interfaces.

Magnetic hardening and generation of room-temperature ferromagnetism at the interface between originally nonmagnetic transition metals and π-conjugated organics is understood to be promoted by interplay between interfacial charge transfer and relaxation-induced distortion of the metal lattice. The relative importance of the two contributions for magnetic hardening of the metal remains unquantified. Here, we disentangle their role via density functional theory simulation of several models of interfaces between Cu and polymers of different steric hindrance, π-conjugation, and electron-accepting properties: polyethylene, polyacetylene, polyethylene terephthalate, and polyurethane.

Binding Mechanism of the Model Charged Dye Carboxyfluorescein to Hyaluronan/Polylysine Multilayers.

Biopolymer-based multilayers become more and more attractive due to the vast span of biological application they can be used for, e.g., implant coatings, cell culture supports, scaffolds.

Modified Mesoporous Silica Nanoparticles with a Dual Synergetic Antibacterial Effect.

Application of mesoporous silica nanoparticles (MSNs) as antifouling/antibacterial carriers is limited and specifically with a dual synergetic effect. In the present work, MSNs modified with quaternary ammonium salts (QASs) and loaded with the biocide Parmetol S15 were synthesized as functional fillers for antifouling/antibacterial coatings. From the family of the MSNs, MCM-48 was selected as a carrier because of its cubic pore structure, high surface area, and high specific pore volume.