PINK: a tender X-ray beamline for X-ray emission spectroscopy.

A high-flux beamline optimized for non-resonant X-ray emission spectroscopy (XES) in the tender X-ray energy range has been constructed at the BESSY II synchrotron source. The beamline utilizes a cryogenically cooled undulator that provides X-rays over the energy range 2.1 keV to 9.

In situ cell for grazing-incidence x-ray diffraction on thin films in thermal catalysis.

A cell for synchrotron-based grazing-incidence x-ray diffraction at ambient pressures and moderate temperatures in a controlled gas atmosphere is presented. The cell is suited for the in situ study of thin film samples under catalytically relevant conditions. To some extent, in addition to diffraction, the cell can be simultaneously applied for x-ray reflectometry and fluorescence studies.

Small-pore hydridic frameworks store densely packed hydrogen.

Nanoporous materials have attracted great attention for gas storage, but achieving high volumetric storage capacity remains a challenge. Here, by using neutron powder diffraction, volumetric gas adsorption, inelastic neutron scattering and first-principles calculations, we investigate a magnesium borohydride framework that has small pores and a partially negatively charged non-flat interior for hydrogen and nitrogen uptake. Hydrogen and nitrogen occupy distinctly different adsorption sites in the pores, with very different limiting capacities of 2.

Intercalation of CO Selected by Type of Interlayer Cation in Dried Synthetic Hectorite.

Clay minerals are abundant in caprock formations for anthropogenic storage sites for CO, and they are potential capture materials for CO postcombustion sequestration. We investigate the response to CO exposure of dried fluorohectorite clay intercalated with Li, Na, Cs, Ca, and Ba. By powder X-ray diffraction, we demonstrate that fluorohectorite with Na, Cs, Ca, or Ba does not swell in response to CO and that Li-fluorohectorite does swell.

Cooperative light-induced breathing of soft porous crystals via azobenzene buckling.

Although light is a prominent stimulus for smart materials, the application of photoswitches as light-responsive triggers for phase transitions of porous materials remains poorly explored. Here we incorporate an azobenzene photoswitch in the backbone of a metal-organic framework producing light-induced structural contraction of the porous network in parallel to gas adsorption. Light-stimulation enables non-invasive spatiotemporal control over the mechanical properties of the framework, which ultimately leads to pore contraction and subsequent guest release via negative gas adsorption.

CO Adsorption Enhanced by Tuning the Layer Charge in a Clay Mineral.

Due to the compact two-dimensional interlayer pore space and the high density of interlayer molecular adsorption sites, clay minerals are competitive adsorption materials for carbon dioxide capture. We demonstrate that with a decreasing interlayer surface charge in a clay mineral, the adsorption capacity for CO increases, while the pressure threshold for adsorption and swelling in response to CO decreases. Synthetic nickel-exchanged fluorohectorite was investigated with three different layer charges varying from 0.

Direct Observation of the Xenon Physisorption Process in Mesopores by Combining Anomalous Small-Angle X-ray Scattering and X-ray Absorption Spectroscopy.

The morphology and structural changes of confined matter are still far from being understood. This report deals with the development of a novel method based on the combination of anomalous small-angle X-ray scattering (ASAXS) and X-ray absorption near edge structure (XANES) spectroscopy to directly probe the evolution of the xenon adsorbate phase in mesoporous silicon during gas adsorption at 165 K. The interface area and size evolution of the confined xenon phase were determined via ASAXS demonstrating that filling and emptying the pores follow two distinct mechanisms.

Facilitated crystal handling using a simple device for evaporation reduction in microtiter plates.

In the past two decades, most of the steps in a macromolecular crystallography experiment have undergone tremendous development with respect to speed, feasibility and increase of throughput. The part of the experimental workflow that is still a bottleneck, despite significant efforts, involves the manipulation and harvesting of the crystals for the diffraction experiment. Here, a novel low-cost device is presented that functions as a cover for 96-well crystallization plates.

Workflow and Tools for Crystallographic Fragment Screening at the Helmholtz-Zentrum Berlin.

Fragment screening is a technique that helps to identify promising starting points for ligand design. Given that crystals of the target protein are available and display reproducibly high-resolution X-ray diffraction properties, crystallography is among the most preferred methods for fragment screening because of its sensitivity. Additionally, it is the only method providing detailed 3D information of the binding mode of the fragment, which is vital for subsequent rational compound evolution.

Massive Pressure Amplification by Stimulated Contraction of Mesoporous Frameworks*.

Herein we demonstrate mesoporous frameworks interacting with carbon dioxide leading to stimulated structural contractions and massive out-of-equilibrium pressure amplification well beyond ambient pressure. Carbon dioxide, a non-toxic and non-flammable working medium, is promising for the development of pressure-amplifying frameworks for pneumatic technologies and safety systems. The strong interaction of the fluid with the framework even contracts DUT-46, a framework hitherto considered as non-flexible.

The role of temperature and adsorbate on negative gas adsorption transitions of the mesoporous metal-organic framework DUT-49.

Unusual adsorption phenomena, such as breathing and negative gas adsorption (NGA), are rare and challenge our thermodynamic understanding of adsorption in deformable porous solids. In particular, NGA appears to break the rules of thermodynamics in these materials by exhibiting a spontaneous release of gas accompanying an increase in pressure. This anomaly relies on long-lived metastable states.

Specific Isotope-Responsive Breathing Transition in Flexible Metal-Organic Frameworks.

An isotope-selective responsive system based on molecular recognition in porous materials has potential for the storage and purification of isotopic mixtures but is considered unachievable because of the almost identical physicochemical properties of the isotopes. Herein, a unique isotope-responsive breathing transition of the flexible metal-organic framework (MOF), MIL-53(Al), which can selectively recognize and respond to only D molecules through a secondary breathing transition, is reported. This novel phenomenon is examined using neutron diffraction experiments under the same conditions for H and D sorption experiments.

Correction: An advanced structural characterization of templated meso-macroporous carbon monoliths by small- and wide-angle scattering techniques.

[This corrects the article DOI: 10.3762/bjnano.11.

An advanced structural characterization of templated meso-macroporous carbon monoliths by small- and wide-angle scattering techniques.

This study is dedicated to link the nanoscale pore space of carbon materials, prepared by hard-templating of meso-macroporous SiO monoliths, to the corresponding nanoscale polyaromatic microstructure using two different carbon precursors wthat generally exhibit markedly different carbonization properties, i.e., a graphitizable pitch and a non-graphitizable resin.

Exploiting Dynamic Opening of Apertures in a Partially Fluorinated MOF for Enhancing H Desorption Temperature and Isotope Separation.

Deuterium has been recognized as an irreplaceable element in industrial and scientific research. However, hydrogen isotope separation still remains a huge challenge due to the identical physicochemical properties of the isotopes. In this paper, a partially fluorinated metal-organic framework (MOF) with copper, a so-called FMOFCu, was investigated to determine the separation efficiency and capacity of the framework for deuterium extraction from a hydrogen isotope mixture.

An All-in-one Sample Holder for Macromolecular X-ray Crystallography with Minimal Background Scattering.

Macromolecular X-ray crystallography (MX) is the most prominent method to obtain high-resolution three-dimensional knowledge of biological macromolecules. A prerequisite for the method is that highly ordered crystalline specimen need to be grown from the macromolecule to be studied, which then need to be prepared for the diffraction experiment. This preparation procedure typically involves removal of the crystal from the solution, in which it was grown, soaking of the crystal in ligand solution or cryo-protectant solution and then immobilizing the crystal on a mount suitable for the experiment.

The effect of crystallite size on pressure amplification in switchable porous solids.

Negative gas adsorption (NGA) in ordered mesoporous solids is associated with giant contractive structural transitions traversing through metastable states. Here, by systematically downsizing the crystal dimensions of a mesoporous MOF (DUT-49) from several micrometers to less than 200 nm, counterintuitive NGA phenomena are demonstrated to critically depend on the primary crystallite size. Adsorbing probe molecules, such as n-butane or nitrogen, gives insights into size-dependent activation barriers and thermodynamics associated with guest-induced network contraction.

A ferroelectric liquid crystal confined in cylindrical nanopores: reversible smectic layer buckling, enhanced light rotation and extremely fast electro-optically active Goldstone excitations.

The orientational and translational order of a thermotropic ferroelectric liquid crystal (2MBOCBC) imbibed in self-organized, parallel, cylindrical pores with radii of 10, 15, or 20 nm in anodic aluminium oxide monoliths (AAO) are explored by high-resolution linear and circular optical birefringence as well as neutron diffraction texture analysis. The results are compared to experiments on the bulk system. The native oxidic pore walls do not provide a stable smectogen wall anchoring.

A Stimuli-Responsive Zirconium Metal-Organic Framework Based on Supermolecular Design.

A flexible, yet very stable metal-organic framework (DUT-98, Zr O (OH) (CPCDC) (H O) , CPCDC=9-(4-carboxyphenyl)-9H-carbazole-3,6-dicarboxylate) was synthesized using a rational supermolecular building block approach based on molecular modelling of metal-organic chains and subsequent virtual interlinking into a 3D MOF. Structural characterization via synchrotron single-crystal X-ray diffraction (SCXRD) revealed the one-dimensional pore architecture of DUT-98, envisioned in silico. After supercritical solvent extraction, distinctive responses towards various gases stimulated reversible structural transformations, as detected using coupled synchrotron diffraction and physisorption techniques.

In Situ Hydrogenation of the Zintl Phase SrGe.

Hydrides (deuterides) of the CrB-type Zintl phases AeTt (Ae = alkaline earth; Tt = tetrel) show interesting bonding properties with novel polyanions. In SrGeD (γ phase), three zigzag chains of Ge atoms are condensed and terminated by covalently bound D atoms. A combination of in situ techniques (thermal analysis and synchrotron and neutron powder diffraction) revealed the existence of two further hydride (deuteride) phases with lower H (D) content (called α and β phases).

Conformation-controlled hydrogen storage in the CAU-1 metal-organic framework.

We have studied the mechanism of hydrogen storage in the aluminium based metal-organic framework CAU-1 or [Al(OH)(OCH)(OC-CHNH-CO)] using a complementary multidisciplinary approach of volumetric gas sorption analysis, in situ neutron diffraction and spectroscopy and ab initio calculations. The structure of CAU-1 forms two different types of microporous cages: (i) an octahedral cage with a diameter of about 10 Å and (ii) a tetrahedral cage with a diameter of about 5 Å. Though all metal sites of CAU-1 are fully coordinated, the material exhibits relatively high storage capacities, reaching 4 wt% at a temperature of 70 K.

Illuminating solid gas storage in confined spaces - methane hydrate formation in porous model carbons.

Methane hydrate nucleation and growth in porous model carbon materials illuminates the way towards the design of an optimized solid-based methane storage technology. High-pressure methane adsorption studies on pre-humidified carbons with well-defined and uniform porosity show that methane hydrate formation in confined nanospace can take place at relatively low pressures, even below 3 MPa CH4, depending on the pore size and the adsorption temperature. The methane hydrate nucleation and growth is highly promoted at temperatures below the water freezing point, due to the lower activation energy in ice vs.