Noncoordinating Anions as Key Modulators of Supramolecular Structures, Optical and Electrical Properties in Nickel(II) Complexes.

This study explores the synthesis, structural characterization, and examination of two nickel(II) complexes, [Ni( )](NO) (complex ) and [Ni( )](ClO) (complex ), using the newly synthesized organic heterocyclic chelating ligand [4-imidazole-2,6-di(pyrazinyl)pyridine]. Through single-crystal X-ray diffraction, we have detailed the crystal structures of these complexes, highlighting their distorted octahedral geometries and diverse supramolecular interactions including π···π stacking, anion···π, and hydrogen bonding. These interactions crucially influence the formation of distinct one- and two-dimensional supramolecular architectures.

Bioinspired Flexible and Low-Voltage Organic Synaptic Transistors for UV Light-Driven Vision Systems.

Neuromorphic vision systems, particularly those stimulated by ultraviolet (UV) light, hold great potential applications in portable electronics, wearable technology, biological analysis, military surveillance, etc. Organic artificial synaptic devices hold immense potential in this field due to their ease of processing, flexibility, and biocompatibility. In this work, we have fabricated a flexible organic field-effect transistor (OFET) that utilizes chitosan-silver nanoparticles (AgNPs) composite material as the active dielectric material.

Elastomeric Ionic Hydrogel-Based Flexible Moisture-Electric Generator for Next-Generation Wearable Electronics.

Rapid consumption of traditional energy resources creates utmost research interest in developing self-sufficient electrical devices to progress next-generation electronics to a level up. To address the global energy crisis, moisture-electric generators (MEGs) are proving to be an emerging technology in this field, capable of powering wearable electronics by harvesting energy from abundantly available ambient moisture without any requirement for external/additional energy. Recent advances in MEGs generally utilize an inorganic, metal, or petroleum-based polymeric material as an active material, which may produce sufficient current but lacks the flexibility and stretchability required for wearable electronics.

Thin Film Formation of HSA in the Presence of CTAB-Capped Gold Nanorods through Phase Separation.

Phase behavior in protein-nanoparticle systems in light of protein corona formation has been investigated. We report the formation of HSA thin films following the addition of a solid protein to a solution of CTAB-capped gold nanorods (AuNRs) via phase separation. The phase separation behavior was observed through UV-vis spectroscopy, turbidity assays, and DLS studies.

Precise and rapid point-of-care quantification of albumin levels in unspiked blood using organic field-effect transistors.

Nanowire-based field-effect transistors (FETs) are widely used to detect biomolecules precisely. However, the fabrication of such devices involves complex integration procedures of nanowires into the device and most are not easily scalable. In this work, we report a straightforward fabrication approach that utilizes the grain boundaries of the semiconducting film of organic FETs to fabricate biosensors for the detection of human serum albumin (HSA) with an enhanced sensitivity and detection range.

MOF-Assimilated High-Sensitive Organic Field-Effect Transistors for Rapid Detection of a Chemical Warfare Agent.

The selective and rapid detection of trace amounts of highly toxic chemical warfare agents has become imperative for efficiently using military and civilian defense. Metal-organic frameworks (MOFs) are a class of inorganic-organic hybrid porous material that could be potential next-generation toxic gas sensors. However, the growth of a MOF thin film for efficiently utilizing the material properties for fabricating electronic devices has been challenging.

Diffusion-Induced Ingress of Angiotensin-Converting Enzyme 2 into the Charge Conducting Path of a Pentacene Channel for Efficient Detection of SARS-CoV-2 in Saliva Samples.

Rapid and accurate identification of a pathogen is crucial for disease control and prevention of the epidemic of emerging infectious like SARS-CoV-2. However, no foolproof gold standard assay exists to date. Nucleic acid-based molecular diagnostic tests have been established for identifying COVID-19.

Silver Nanodot Decorated Dendritic Copper Foam As a Hydrophobic and Mechano-Chemo Bactericidal Surface.

The present work investigates the time-dependent antibacterial activity of the silver nanodot decorated dendritic copper foam nanostructures against (Gram-negative) and (Gram-positive) bacteria. An advanced antibacterial and antifouling surface is fabricated utilizing the collective antibacterial properties of silver nanodots, chitosan, and dendritic copper foam nanostructures. The porous network of the Ag nanodot decorated Cu foam is made up of nanodendrites, which reduce the wettability of the surface.

Interface engineering of moisture-induced ionic albumen dielectric layers through self-crosslinking of cysteine amino acids for low voltage, high-performance organic field-effect transistors.

The interface roughness between the semiconducting and dielectric layers of organic field-effect transistors (OFETs) plays a crucial role in the charge transport mechanism through the device. Here we report the interface engineering of a moisture induced ionic albumen material through systematic control of the temperature-dependent self-crosslinking of cysteine amino acids in the dielectric layer. The evolution of the surface morphologies of albumen and pentacene semiconducting films has been studied to achieve a smooth interface for enhanced charge transport.

One-Dimensional NiSe-Se Hollow Nanotubular Architecture as a Binder-Free Cathode with Enhanced Redox Reactions for High-Performance Hybrid Supercapacitors.

Selenium-enriched nickel selenide (NiSe-Se) nanotubes supported on highly conductive nickel foam (NiSe-Se@Ni foam) were synthesized using chemical bath deposition with the aid of lithium chloride as a shape-directing agent. The uniformly grown NiSe-Se@Ni foam, with its large number of electroactive sites, facilitated rapid diffusion and charge transport. The NiSe-Se@Ni foam electrode exhibited a superior specific capacitance value of 2447.

Low Operating Voltage Organic Field-Effect Transistors with Gelatin as a Moisture-Induced Ionic Dielectric Layer: The Issues of High Carrier Mobility.

We have developed low-voltage (<2 V) flexible organic field-effect transistors (OFETs) with high carrier mobility using gelatin as a moisture-induced ionic gate dielectric system. Ionic concentration in the gelatin layer depends on the relative humidity condition during the measurement. The capacitance of the dielectric layer used for the calculation of field-effect carrier mobility for the OFETs crucially depends on the frequency at which the capacitance was measured.

Electrodeposited CuO Nanopetal Architecture as a Superhydrophobic and Antibacterial Surface.

Bacterial infections being sporadic and uncontrollable demands an urgent paradigm shift in the development of novel antibacterial agents. This work involves the fabrication of CuO nanopetals over copper foil that show superlative antibacterial and superhydrophobic properties. A superhydrophobic surface has been fabricated using the electrochemical deposition (ECD) method.

Superior optical (λ ∼ 1550 nm) emission and detection characteristics of Ge microdisks grown on virtual SiGe/Si substrates using molecular beam epitaxy.

We report the optical characteristics of relatively large sized (∼7.0-8.0 μm) but low aspect ratio Ge microdisks grown on a virtual SiGe substrate using molecular beam epitaxy following the Stranski-Krastanov growth mechanism.

Organic Field-Effect Transistor-Based Ultrafast, Flexible, Physiological-Temperature Sensors with Hexagonal Barium Titanate Nanocrystals in Amorphous Matrix as Sensing Material.

Organic field-effect transistors (OFETs) with hexagonal barium titanate nanocrystals (h-BTNCs) in amorphous matrix as one of the bilayer dielectric systems have been fabricated on a highly flexible 10 μm thick poly(ethylene terephthalate) substrate. The device current and mobility remain constant up to a bending radius of 4 mm, which makes the substrate suitable for wearable e-skin applications. h-BTNC films are found to be highly temperature-sensitive, and the OFETs designed based on this material showed ultraprecision measurement (∼4.

P-type β-MoO nanostructures on n-Si by hydrogenation process: synthesis and application towards self-biased UV-visible photodetection.

We report on the synthesis and UV-vis photodetection application of p-type MoO nanostructures (NSs) on Si substrate. β-MoO NSs have been synthesized from previously grown α-MoO structures/n-type Si via a hydrogenation process at 450 °C. After hydrogenation, the α-MoO structures were completely converted into β-MoO NSs without the presence of sub-oxidized phases of molybdenum oxide.

Effects of Dielectric Material, HMDS Layer, and Channel Length on the Performance of the Perylenediimide-Based Organic Field-Effect Transistors.

It is well-known that the improvement in the performance of organic field-effect transistors (OFETs) relies primarily on growth properties of organic molecules on gate dielectrics, their interface behavior, and on understanding the physical processes occurring during device operation. In this work, the relation of varying the dielectric materials in an n-type OFET device based on 1,7-dibromo-,'-dioctadecyl-3,4,9,10-perylenetetracarboxylic diimide (BrPTCDI-C18) molecule on a low-cost glass substrate at different channel lengths is reported, which is conceptually very important and fundamental in the context of device performance. Anodized alumina (AlO) along with dielectric films of polyvinyl alcohol (PVA) or polymethylmethacrylate (PMMA) was used to fabricate the devices and study their influence on various transistor properties.

Enhanced environmental stability induced by effective polarization of a polar dielectric layer in a trilayer dielectric system of organic field-effect transistors: a quantitative study.

We report a concept fabrication method that helps to improve the performance and stability of copper phthalocyanine (CuPc) based organic field-effect transistors (OFETs) in ambient. The devices were fabricated using a trilayer dielectric system that contains a bilayer polymer dielectrics consisting of a hydrophobic thin layer of poly(methyl methacrylate) (PMMA) on poly(vinyl alcohol) (PVA) or poly(4-vinylphenol) (PVP) or polystyrene (PS) with Al2O3 as a third layer. We have explored the peculiarities in the device performance (i.

Local diffusion induced roughening in cobalt phthalocyanine thin film growth.

We have studied the kinetic roughening in the growth of cobalt phthalocyanine (CoPc) thin films grown on SiO2/Si(001) surfaces as a function of the deposition time and the growth temperature using atomic force microscopy (AFM). We have observed that the growth exhibits the formation of irregular islands, which grow laterally as well as vertically with coverage of CoPc molecules, resulting rough film formation. Our analysis further disclosed that such formation is due to an instability in the growth induced by local diffusion of the molecules following an anomalous scaling behavior.

Organic n-channel transistors based on core-cyanated perylene carboxylic diimide derivatives.

Five core-cyanated perylene carboxylic diimides end-functionalized with fluorine-containing linear and cyclic substituents have been synthesized and employed in the fabrication of air-stable n-channel organic thin-film field-effect transistors with carrier mobilities up to 0.1 cm2/Vs. The relationships between molecular structure, thin-film morphology, substrate temperature during vacuum deposition, transistor performance, and air stability have been investigated.

Imaging of atomic layer deposited (ALD) tungsten monolayers on alpha-TiO2(110) by X-ray standing wave Fourier inversion.

A single atomic layer of tungsten grown by atomic layer deposition (ALD) on a single-crystal rutile TiO2(110) support is studied by the X-ray standing wave (XSW) technique. The surface structural and chemical properties were also examined using atomic force microscopy, X-ray photoelectron spectroscopy, and low-energy electron diffraction. The XSW measured set of hkl Fourier components for the W atomic distribution function are summed together to produce a model-independent 3D map of the W atoms relative to the rutile lattice.

The controlled evolution of a polymer single crystal.

We present a method for controlling the initiation and kinetics of polymer crystal growth using dip-pen nanolithography and an atomic force microscope tip coated with poly-dl-lysine hydrobromide. Triangular prisms of the polymer epitaxially grow on freshly cleaved mica substrates, and their in-plane and out-of-plane growth rates can be controlled by raster scanning the coated tip across the substrate. Atomic force microscope images were concomitantly recorded, providing a set of photographic images of the process as it spans the nanometer- to micrometer-length scales as a function of environmental conditions.