FeC@Fe decorated carbonized wood Fiber catalyst for organic dyes degradation: Preparation, characterization and mechanism.

The extensive use of organic dyes has led to significant water pollution. Using lignocellulosic waste as a precursor for catalysts preparation for sewage remediation presents an effective alternative with numerous advantages in sustainability, cost-effectiveness, and environmental compatibility. In this work, wood fiber waste collected from wood processing plants was decorated with Prussian blue (PB) and then annealed to produce carbonized wood fiber catalyst (FeC@Fe-CB).

A novel sustainable wood-based negative air anion generator utilizing in-situ polymerization of polylactic acid to reinforce the cellulose framework.

The generation of negative air ions (NAI) by furniture contributes to indoor air purification and enhances the living environment. However, commercially available furniture typically relies on surface coatings to release NAI. Over time, the degradation of these coatings leads to a significant decline in NAI release performance, presenting a persistent challenge for sustained effectiveness.

Direct Ink Writing 3D Printing Elastomeric Polyurethane Aided by Cellulose Nanofibrils.

3D printing of a flexible polyurethane elastomer is highly demandable for its potential to revolutionize industries ranging from footwear to soft robotics thanks to its exceptional design flexibility and elasticity performance. Nevertheless, conventional methods like fused deposition modeling (FDM) and vat photopolymerization (VPP) polyurethane 3D printing typically limit material options to thermoplastic or photocurable polyurethanes. In this research, a water-borne polyurethane ink was synthesized for direct ink writing (DIW) 3D printing through the incorporation of cellulose nanofibrils (CNFs), enabling direct printing of complex, monolithic elastomeric structures at room temperature that can maintain the designed structure.

Equilibrium Moisture Mediated Esterification Reaction to Achieve Over 100% Lignocellulosic Nanofibrils Yield.

Lignocellulosic nanofibrils (LCNFs) isolation is recognized as an efficient strategy for maximizing biomass utilization. Nevertheless, achieving a 100% yield presents a formidable challenge. Here, an esterification strategy mediated by the equilibrium moisture in biomass is proposed for LCNFs preparation without the use of catalysts, resulting in a yield exceeding 100%.

Effect of hornification on the isolation of anionic cellulose nanofibrils from Kraft pulp via maleic anhydride esterification.

Cellulose nanofibrils (CNF) isolation based on a catalyst-free maleic anhydride esterification has proven to be effective, however, the effects of pulp hornification on CNF isolation by this strategy have yet to be explored, which could present significant impacts for CNF isolation. Herein, dried northern bleached softwood Kraft pulp (D-NBSK) and never-dried northern bleached softwood Kraft pulp (ND-NBSK) were selected as the substrates. After esterification with maleic anhydride (MA), the esterified ND-NBSK pulp (E-ND) shows a significantly smaller size and more fragmented structure than the esterified D-NBSK pulp (E-D).

Exploring the relations of NLR, hsCRP and MCP-1 with type 2 diabetic kidney disease: a cross-sectional study.

Type 2 diabetic kidney disease (T2DKD) is a common microvascular complication of type 2 diabetes mellitus (T2DM), and its incidence is significantly increasing. Microinflammation plays an important role in the development of T2DKD. Based on this, this study investigated the value of inflammatory markers including neutrophil-lymphocyte ratio (NLR), high-sensitivity C-reactive protein (hs-CRP), monocyte chemoattractant protein-1 (MCP-1) in the prediction of T2DKD.

Developing Prussian blue/wood-derived biochar catalyst for persistent organic pollutant degradation: Preparation, characterization, and mechanism.

Biomass-derived biochar shows broad promise for persistent organic pollutants (POPs) degradation and thus establishes a more sustainable homestead. However, effective catalytic performance is still challenging. Herein, an efficient catalyst (Prussian blue decorated wood-derived biochar, PBB) was constructed by introducing Prussian blue (PB) into wood-based biochar to activate peroxymonosulfate (PMS) for removing POPs.

Multiscale Design for Robust, Thermal Insulating, and Flame Self-Extinguishing Cellulose Foam.

Cellulose foams are in high demand in an era of prioritizing environmental consciousness. Yet, transferring the exceptional mechanical properties of cellulose fibers into a cellulose network remains a significant challenge. To address this challenge, an innovative multiscale design is developed for producing cellulose foam with exceptional network integrity.

3D Printed Cellulose Nanofiber Aerogel Scaffold with Hierarchical Porous Structures for Fast Solar-Driven Atmospheric Water Harvesting.

Hygroscopic salt-based composite sorbents are considered ideal candidates for solar-driven atmospheric water harvesting. The primary challenge for the sorbents lies in exposing more hygroscopically active sites to the surrounding air while preventing salt leakage. Herein, a hierarchically structured scaffold is constructed by integrating cellulose nanofiber and lithium chloride (LiCl) as building blocks through 3D printing combined with freeze-drying.

Comparison of Properties of Poly(Lactic Acid) Composites Prepared from Different Components of Corn Straw Fiber.

In recent years, under the pressure of resource shortage and white pollution, the development and utilization of biodegradable wood-plastic composites (WPC) has become one of the hot spots for scholars' research. Here, corn straw fiber (CSF) was chosen to reinforce a poly(lactic acid) (PLA) matrix with a mass ratio of 3:7, and the CSF/PLA composites were obtained by melt mixing. The results showed that the mechanical properties of the corn straw fiber core (CSFC) and corn straw fiber skin (CSFS) loaded PLA composites were stronger than those of the CSFS/PLA composites when the particle size of CSF was low.

Solar-assisted self-heating TiCT-decorated wood aerogel for adsorption and recovery of highly viscous crude oil.

Frequent oil-spill accidents have posed serious threats to ecosystem balance and the efficiency of resources use. Hydrophobic adsorbents that can adsorb and recover oil without causing secondary pollution are ideal candidates for the remediation of oil contamination in water. However, these composites are inefficient for crude oil-spills cleanup because crude oil has low liquidity of at room temperature.

Isolation and characterization of nanocellulose crystals via acid hydrolysis from agricultural waste-tea stalk.

Nanocellulose crystals (NCCs) were successfully prepared via acid hydrolysis from an abundant agricultural waste (tea stalk) in China. The effective factors for NCC yield were modeled by the response surface methodology (RSM). The RSM determined the reaction conditions (HSO concentration, hydrolysis temperature, and reaction time) that optimized the yield of tea stalk NCCs (TNCCs).

Isolation and Characterization of Nanocellulose with a Novel Shape from Walnut ( L.) Shell Agricultural Waste.

Herein, walnut shell (WS) was utilized as the raw material for the production of purified cellulose. The production technique involves multiple treatments, including alkaline treatment and bleaching. Furthermore, two nanocellulose materials were derived from WS by 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) oxidation and sulfuric acid hydrolysis, demonstrating the broad applicability and value of walnuts.