A Quantum Mechanical MP2 Study of the Electronic Effect of Nonplanarity on the Carbon Pyramidalization of Fullerene C.

Among C's diverse functionalities, its potential application in CO sequestration has gained increasing interest. However, the processes involved are sensitive to the molecule's electronic structure, aspects of which remain debated and require greater precision. To address this, we performed structural optimization of fullerene C using the QM MP2/6-31G* method.

Modulating CO Electrocatalytic Conversion to the Organics Pathway by the Catalytic Site Dimension.

Electrochemical reduction of carbon dioxide to organic chemicals provides a value-added route for mitigating greenhouse gas emissions. We report a family of carbon-supported Sn electrocatalysts with the tin size varying from single atom, ultrasmall clusters to nanocrystallites. High single-product Faradaic efficiency (FE) and low onset potential of CO conversion to acetate (FE = 90% @ -0.

La- and Mn-doped cobalt spinel oxygen evolution catalyst for proton exchange membrane electrolysis.

Discovery of earth-abundant electrocatalysts to replace iridium for the oxygen evolution reaction (OER) in a proton exchange membrane water electrolyzer (PEMWE) represents a critical step in reducing the cost for green hydrogen production. We report a nanofibrous cobalt spinel catalyst codoped with lanthanum (La) and manganese (Mn) prepared from a zeolitic imidazolate framework embedded in electrospun polymer fiber. The catalyst demonstrated a low overpotential of 353 millivolts at 10 milliamperes per square centimeter and a low degradation for OER over 360 hours in acidic electrolyte.

Monitoring the Activation of Open Metal Sites in [FeM(μ-O)] Cluster-Based Metal-Organic Frameworks by Single-Crystal X-ray Diffraction.

While trinuclear [FeM(μ-O)] cluster-based metal-organic frameworks (MOFs) have found wide applications in gas storage and catalysis, it is still challenging to identify the structure of open metal sites obtained through proper activations and understand their influence on the adsorption and catalytic properties. Herein, we use in situ variable-temperature single-crystal X-ray diffraction to monitor the structural evolution of [FeM(μ-O)]-based MOFs (PCN-250, M = Ni, Co, Zn, Mg) upon thermal activation and provide the snapshots of metal sites at different temperatures. The exposure of open Fe sites was observed along with the transformation of Fe coordination geometries from octahedron to square pyramid.

Nanoarchitectonics of Metal-Organic Frameworks for Capacitive Deionization via Controlled Pyrolyzed Approaches.

Next-generation desalination technologies are needed to meet the increasing demand for clean water. Capacitive deionization (CDI) is a thermodynamically efficient technique to treat non-potable water with relatively low salinity. The salt removal capacity and rate of CDI are highly dependent on the electrode materials, which are preferentially porous to store ions through electrosorption and/or redox reactions.

Metal-Organic Frameworks and Metal-Organic Gels for Oxygen Electrocatalysis: Structural and Compositional Considerations.

Increasing demand for sustainable and clean energy is calling for the next-generation energy conversion and storage technologies such as fuel cells, water electrolyzers, CO /N reduction electrolyzers, metal-air batteries, etc. All these electrochemical processes involve oxygen electrocatalysis. Boosting the intrinsic activity and the active-site density through rational design of metal-organic frameworks (MOFs) and metal-organic gels (MOGs) as precursors represents a new approach toward improving oxygen electrocatalysis efficiency.

Anti-cancer peptides: classification, mechanism of action, reconstruction and modification.

Anti-cancer peptides (ACPs) are a series of short peptides composed of 10-60 amino acids that can inhibit tumour cell proliferation or migration, or suppress the formation of tumour blood vessels, and are less likely to cause drug resistance. The aforementioned merits make ACPs the most promising anti-cancer candidate. However, ACPs may be degraded by proteases, or result in cytotoxicity in many cases.

An International Laboratory Comparison Study of Volumetric and Gravimetric Hydrogen Adsorption Measurements.

In order to determine a material's hydrogen storage potential, capacity measurements must be robust, reproducible, and accurate. Commonly, research reports focus on the gravimetric capacity, and often times the volumetric capacity is not reported. Determining volumetric capacities is not as straight-forward, especially for amorphous materials.

Ultralow-loading platinum-cobalt fuel cell catalysts derived from imidazolate frameworks.

Achieving high catalytic performance with the lowest possible amount of platinum is critical for fuel cell cost reduction. Here we describe a method of preparing highly active yet stable electrocatalysts containing ultralow-loading platinum content by using cobalt or bimetallic cobalt and zinc zeolitic imidazolate frameworks as precursors. Synergistic catalysis between strained platinum-cobalt core-shell nanoparticles over a platinum-group metal (PGM)-free catalytic substrate led to excellent fuel cell performance under 1 atmosphere of O or air at both high-voltage and high-current domains.

High-performance oxygen reduction catalysts in both alkaline and acidic fuel cells based on pre-treating carbon material and iron precursor.

We demonstrate a new and simple method for pre-treating the carbon material and iron precursor to prepare oxygen reduction reaction (ORR) catalysts, which can produce super-high performance and stability in alkaline solution, with high performance in acid solution. This strategy using cheap materials is simply controllable. Moreover, it has achieved smaller uniform nanoparticles to exhibit high stability, and the synergetic effect of Fe and N offered much higher performance in ORR than commercial Pt/C, with high maximum power density in alkaline and acid fuel cell test.

Erratum: High performance platinum single atom electrocatalyst for oxygen reduction reaction.

This corrects the article DOI: 10.1038/ncomms15938.

High performance platinum single atom electrocatalyst for oxygen reduction reaction.

For the large-scale sustainable implementation of polymer electrolyte membrane fuel cells in vehicles, high-performance electrocatalysts with low platinum consumption are desirable for use as cathode material during the oxygen reduction reaction in fuel cells. Here we report a carbon black-supported cost-effective, efficient and durable platinum single-atom electrocatalyst with carbon monoxide/methanol tolerance for the cathodic oxygen reduction reaction. The acidic single-cell with such a catalyst as cathode delivers high performance, with power density up to 680 mW cm at 80 °C with a low platinum loading of 0.

Toward Highly Efficient Electrocatalyst for Li-O Batteries Using Biphasic N-Doping Cobalt@Graphene Multiple-Capsule Heterostructures.

For the promotion of lithium-oxygen batteries available for practical applications, the development of advanced cathode catalysts with low-cost, high activity, and stable structural properties is demanded. Such development is rooted on certain intelligent catalyst-electrode design that fundamentally facilitates electronic and ionic transport and improves oxygen diffusivity in a porous environment. Here we design a biphasic nitrogen-doped cobalt@graphene multiple-capsule heterostructure, combined with a flexible, stable porous electrode architecture, and apply it as promising cathodes for lithium-oxygen cells.

Insights into the Distinct Lithiation/Sodiation of Porous Cobalt Oxide by in Operando Synchrotron X-ray Techniques and Ab Initio Molecular Dynamics Simulations.

Sodium-ion batteries (SIBs) have been considered as one of the promising power source candidates for the stationary storage industries owing to the much lower cost of sodium than lithium. It is well-known that the electrode materials largely determine the energy density of the battery systems. However, recent discoveries on the electrode materials showed that most of them present distinct lithium and sodium storage performance, which is not yet well understood.

Heterogeneous silicon mesostructures for lipid-supported bioelectric interfaces.

Silicon-based materials have widespread application as biophysical tools and biomedical devices. Here we introduce a biocompatible and degradable mesostructured form of silicon with multi-scale structural and chemical heterogeneities. The material was synthesized using mesoporous silica as a template through a chemical vapour deposition process.

Highly efficient nonprecious metal catalyst prepared with metal-organic framework in a continuous carbon nanofibrous network.

Fuel cell vehicles, the only all-electric technology with a demonstrated >300 miles per fill travel range, use Pt as the electrode catalyst. The high price of Pt creates a major cost barrier for large-scale implementation of polymer electrolyte membrane fuel cells. Nonprecious metal catalysts (NPMCs) represent attractive low-cost alternatives.

NaBH4 in "Graphene Wrapper:" Significantly Enhanced Hydrogen Storage Capacity and Regenerability through Nanoencapsulation.

A new high-capacity reversible hydrogen-storage material synthesized by the encapsulation of NaBH4 nanoparticles in graphene is reported. This approach effectively prevents phase agglomeration or separation during successive H2 discharge/recharge processes and enables rapid H2 uptake and release in NaBH4 under mild conditions. The strategy advanced here paves a new way for application in energy generation and storage.

In operando spatiotemporal study of Li(2)O(2) grain growth and its distribution inside operating Li-O(2) batteries.

Nanocrystalline lithium peroxide (Li2 O2 ) is considered to play a critical role in the redox chemistry during the discharge-charge cycling of the Li-O2 batteries. In this report, a spatially resolved, real-time synchrotron X-ray diffraction technique was applied to study the cyclic formation/decomposition of Li2 O2 crystallites in an operating Li-O2 cell. The evaluation of Li2 O2 grain size, concentration, and spatial distribution inside the cathode is demonstrated under the actual cycling conditions.

Highly efficient non-precious metal electrocatalysts prepared from one-pot synthesized zeolitic imidazolate frameworks.

A facile synthesis of non-PGM ORR electrocatalysts through thermolysis of one-pot synthesized ZIF is demonstrated. The electrocatalysts exhibit excellent activity, with a maximum volumetric current density of 88.1 A cm(-3) measured at 0.

Reversibility of anodic lithium in rechargeable lithium-oxygen batteries.

Non-aqueous lithium-air batteries represent the next-generation energy storage devices with very high theoretical capacity. The benefit of lithium-air batteries is based on the assumption that the anodic lithium is completely reversible during the discharge-charge process. Here we report our investigation on the reversibility of the anodic lithium inside of an operating lithium-air battery using spatially and temporally resolved synchrotron X-ray diffraction and three-dimensional micro-tomography technique.

Photodissociation structural dynamics of trirutheniumdodecacarbonyl investigated by X-ray transient absorption spectroscopy.

The molecular and electronic structures of the transient intermediates generated from the photolysis of trirutheniumdodecacarbonyl, Ru3(CO)12, by ultrafast UV (351 nm) laser excitation were investigated using X-ray transient absorption (XTA) spectroscopy. The electronic configuration change and nuclear rearrangement after the dissociation of carbonyls were observed at ruthenium K-edge X-ray absorption near edge structure and X-ray absorption fine structure spectra. Analysis of XTA data, acquired after 100, 200, and 400 ps and 300 ns time delay following the photoexcitation, identified the presence of three intermediate species with Ru3(CO)10 being the most dominating one.

Facile oxidative conversion of TiH2 to high-concentration Ti(3+)-self-doped rutile TiO2 with visible-light photoactivity.

TiO2, in the rutile phase with a high concentration of self-doped Ti(3+), has been synthesized via a facile, all inorganic-based, and scalable method of oxidizing TiH2 in H2O2 followed by calcinations in Ar gas. The material was shown to be photoactive in the visible-region of the electromagnetic spectrum. Powdered X-ray diffraction (PXRD), transmission electron microscopy (TEM), ultraviolet-visible-near-infrared (UV-vis-NIR), diffuse reflectance spectroscopy (DRS), and Brunauer-Emmett-Teller (BET) methods were used to characterize the crystalline, structural, and optical properties and specific surface area of the as-synthesized Ti(3+)-doped rutile, respectively.

Direct synthesis of bimetallic Pd3Ag nanoalloys from bulk Pd3Ag alloy.

We report a transformative, all inorganic synthesis method of preparing supported bimetallic Pd(3)Ag alloy nanoparticles. The method involves breaking down bulk Pd(3)Ag alloy into the nanoparticles in liquid lithium, converting metallic Li to LiOH, and transferring Pd(3)Ag nanoparticles/LiOH mixture onto non-water-soluble supports, followed by leaching off the LiOH with water under ambient conditions. The size of the resulting Pd(3)Ag nanoparticles was found narrowly distributed around 2.

Microfocused X-ray study on precipitate formation in the separator region of nonaqueous Li-O(2) batteries.

Using a microfocused synchrotron X-ray diffraction (μ-XRD) method, we systematically investigated the distributions of insoluble lithium precipitates, which formed through electrolyte decomposition, separately in all three regions (cathode, separator, and anode) of failed batteries with a spatial resolution of 20 μm. We found unexpectedly that there was a significantly higher concentration (almost twice as much) of precipitates in the separator than in the cathode. SEM revealed that the precipitates grew on the separator fiber surface, ultimately obstructing the pores serving as the ion-transport channel.