Analysis of polaron pair lifetime dynamics and secondary processes in exciplex driven TADF OLEDs using organic magnetic field effects.

Magnetic field effects (MFEs) in thermally activated delayed fluorescence (TADF) materials have been shown to influence the reverse intersystem crossing (RISC) and to impact on electroluminescence (EL) and conductivity. Here, we present a novel model combining Cole-Cole and Lorentzian functions to describe low and high magnetic field effects originating from hyperfine coupling, the Δg mechanism, and triplet processes. We applied this approach to organic light-emitting devices of third generation based on tris(4-carbazoyl-9-ylphenyl)amine (TCTA) and 2,2',2″-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi), exhibiting blue emission, to unravel their loss mechanisms.

Anchoring Atomically Precise Chiral Bismuth Oxido Nanoclusters on Gold: The Role of Amino Acid Linkers.

The adsorption of chiral molecules onto metallic surfaces triggers electron spin polarization at the interface, paving the way for applications in chiral opto-spintronics. However, the spin effects sensitively depend on the binding and ordering of the chiral species on surfaces. This study explores the adsorption of chiral thioether-functionalized atomically precise bismuth oxido nanoclusters (BiO-NCs) on gold (Au) surfaces, extending the conventional approach of using thiol-containing molecules and complexes to nanoclusters.

Correction: Luminescence and photoelectrochemical properties of size-selected aqueous copper-doped Ag-In-S quantum dots.

[This corrects the article DOI: 10.1039/C8RA00257F.].

Photocatalytic Performance of Sol-Gel Prepared TiO Thin Films Annealed at Various Temperatures.

Titanium dioxide (TiO) in the form of thin films has attracted enormous attention for photocatalysis. It combines the fundamental properties of TiO as a large bandgap semiconductor with the advantage of thin films, making it competitive with TiO powders for recycling and maintenance in photocatalytic applications. There are many aspects affecting the photocatalytic performance of thin film structures, such as the nanocrystalline size, surface morphology, and phase composition.

Enhanced photoconductivity of hybrid 2D-QD MoS2-AgInS2 structures.

This study describes the fabrication of hybrid two-dimensional (2D)-quantum dot (QD) MoS2-AgInS2 photoconductive devices through the mechanical pressing of a MoS2 flake onto an AgInS2 QD film. The devices exhibit an enhanced photoresponse at both continuous and modulated optical excitations, compared with the bare MoS2 or AgInS2 layer, due to the formation of a built-in electric field near the MoS2/AgInS2 interface. The continuous wave photoresponse is significantly higher due to the effective photoconductive gain when electrons flow freely through the MoS2 flake, whereas holes are effectively trapped in AgInS2 QDs.

Influence of Thermal and Flash-Lamp Annealing on the Thermoelectrical Properties of CuZnSnS Nanocrystals Obtained by "Green" Colloidal Synthesis.

The problem with waste heat in solar panels has stimulated research on materials suitable for hybrid solar cells, which combine photovoltaic and thermoelectric properties. One such potential material is CuZnSnS (CZTS). Here, we investigated thin films formed from CZTS nanocrystals obtained by "green" colloidal synthesis.

Local phonon imaging of AlN nanostructures with nanoscale spatial resolution.

We demonstrate local phonon analysis of single AlN nanocrystals by two complementary imaging spectroscopic techniques: tip-enhanced Raman scattering (TERS) and nano-Fourier transform infrared (nano-FTIR) spectroscopy. Strong surface optical (SO) phonon modes appear in the TERS spectra with their intensities revealing a weak polarization dependence. The local electric field enhancement stemming from the plasmon mode of the TERS tip modifies the phonon response of the sample, making the SO mode dominate over other phonon modes.

The Influence of Process Parameters on the Microstructural Properties of Spray-Pyrolyzed β-GaO.

In this work, the deposition of β-GaO microstructures and thin films was performed with Ga(NO) solutions by ultrasonic nebulization and spray coating as low-cost techniques. By changing the deposition parameters, the shape of β-GaO microstructures was controlled. Micro-spheres were obtained by ultrasonic nebulization.

Local dielectric function of hBN-encapsulated WSflakes grown by chemical vapor deposition.

Hexagonal boron nitride (hBN), sometimes referred to as white graphene, receives growing interest in the scientific community, especially when combined into van der Waals (vdW) homo- and heterostacks, in which novel and interesting phenomena may arise. hBN is also commonly used in combination with two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDCs). The realization of hBN-encapsulated TMDC homo- and heterostacks can indeed offer opportunities to investigate and compare TMDC excitonic properties in various stacking configurations.

Core and Shell Contributions to the Phonon Spectra of CdTe/CdS Quantum Dots.

The parameters of the shell and interface in semiconductor core/shell nanocrystals (NCs) are determinant for their optical properties and charge transfer but are challenging to be studied. Raman spectroscopy was shown earlier to be a suitable informative probe of the core/shell structure. Here, we report the results of a spectroscopic study of CdTe NCs synthesized by a facile route in water, using thioglycolic acid (TGA) as a stabilizer.

Third Crystalline Form of P(NDI2OD-T2) with Pronounced End-on Texture.

We report the observation of a third crystalline polymorph, "form III", of the well-studied electron-transporting conjugated polymer P(NDI2OD-T2) that exhibits end-on texture. This third polymorph of P(NDI2OD-T2) is distinguished from other polymorphs by having two monomer units incorporated along the backbone-stacking direction, resulting in a doubling of the axis of the unit cell. Form III crystallites are realized by melt-annealing a thin film followed by slow cooling.

Raman Spectroscopy and Thermoelectric Characterization of Composite Thin Films of CuZnSnS Nanocrystals Embedded in a Conductive Polymer PEDOT:PSS.

CuZnSnS (CZTS) is an intensively studied potential solar cell absorber and a promising thermoelectric (TE) material. In the form of colloidal nanocrystals (NCs), it is very convenient to form thin films on various substrates. Here, we investigate composites of CZTS NCs with PEDOT:PSS, a widely used photovoltaics polymer.

Phonon Raman spectroscopy of nanocrystalline multinary chalcogenides as a probe of complex lattice structures.

Ternary (I-III-VI) and quaternary (I-II-IV-VI) metal-chalcogenides like CuInSor CuZnSn(S,Se)are among the materials currently most intensively investigated for various applications in the area of alternative energy conversion and light-emitting devices. They promise more sustainable and affordable solutions to numerous applications, compared to more developed and well understood II-VI and III-V semiconductors. Potentially superior properties are based on an unprecedented tolerance of these compounds to non-stoichiometric compositions and polymorphism.

Exciton tuning in monolayer WSe substrate induced electron doping.

We report large exciton tuning in WSe monolayers substrate induced non-degenerate doping. We observe a redshift of ∼62 meV for the A exciton together with a 1-2 orders of magnitude photoluminescence (PL) quenching when the monolayer WSe is brought in contact with highly oriented pyrolytic graphite (HOPG) compared to dielectric substrates such as hBN and SiO. As the evidence of doping from HOPG to WSe, a drastic increase of the intensity ratio of trions to neutral excitons was observed.

Raman Fingerprint of Interlayer Coupling in 2D TMDCs.

Vertical stacking of two-dimensional (2D) homo- and heterostructures are intriguing research objects, as they are essential for fundamental studies and a key towards 2D device applications. It is paramount to understand the interlayer coupling in 2D materials and to find a fast yet precise characteristic signature. In this work, we report on a Raman fingerprint of interlayer coupling in 2D transition metal dichalcogenides (TMDCs).

Plasmonic colloidal Au nanoparticles in DMSO: a facile synthesis and characterisation.

We report a new pathway for the synthesis of plasmonic gold nanoparticles (Au NPs) in a bio-compatible medium. A modified room temperature approach based on the standard Turkevich synthesis, using sodium citrate as a reducing and stabilizing agent, results in a highly stable colloidal suspension of Au NPs in dimethyl sulfoxide (DMSO). The mean NP size of about 15 nm with a fairly low size distribution is revealed by scanning electron microscopy.

Self-assembly of colloidal single-layer carbon nitride.

We introduce a new concept of a "bottom-to-top" design of intercalate carbon nitride compounds based on the effects of self-assembly of colloidal single-layer carbon nitride (SLCN) sheets stabilized by tetraethylammonium hydroxide NEtOH upon ambient drying of the water solvent. These effects include (i) formation of stage-1 intercalates of NEtOH during the ambient drying of SLCN colloids on glass substrates and (ii) the spontaneous formation of layered hexagonally-shaped networks of SLCN sheets on freshly-cleaved mica surfaces. The dynamics of the intercalate formation was followed by X-ray diffraction allowing different stages to be identified, including the deposition of a primary "wet" intercalate of hydrated NEtOH and the gradual elimination of excessive water during its ambient drying.

Surface- and Tip-Enhanced Raman Scattering by CdSe Nanocrystals on Plasmonic Substrates.

This work presents an overview of the latest results and new data on the optical response from spherical CdSe nanocrystals (NCs) obtained using surface-enhanced Raman scattering (SERS) and tip-enhanced Raman scattering (TERS). SERS is based on the enhancement of the phonon response from nanoobjects such as molecules or inorganic nanostructures placed on metal nanostructured substrates with a localized surface plasmon resonance (LSPR). A drastic SERS enhancement for optical phonons in semiconductor nanostructures can be achieved by a proper choice of the plasmonic substrate, for which the LSPR energy coincides with the laser excitation energy.

Traps and transport resistance are the next frontiers for stable non-fullerene acceptor solar cells.

Stability is one of the most important challenges facing material research for organic solar cells (OSC) on their path to further commercialization. In the high-performance material system PM6:Y6 studied here, we investigate degradation mechanisms of inverted photovoltaic devices. We have identified two distinct degradation pathways: one requires the presence of both illumination and oxygen and features a short-circuit current reduction, the other one is induced thermally and marked by severe losses of open-circuit voltage and fill factor.

Deposition of Nanosized Amino Acid Functionalized Bismuth Oxido Clusters on Gold Surfaces.

Bismuth compounds are of growing interest with regard to potential applications in catalysis, medicine, and electronics, for which their environmentally benign nature is one of the key factors. One thing that currently hampers the further development of bismuth oxido-based materials, however, is the often low solubility of the precursors, which makes targeted immobilisation on substrates challenging. We present an approach towards the solubilisation of bismuth oxido clusters by introducing an amino carboxylate as a functional group.

Plasmon-enhanced Raman spectroscopy of two-dimensional semiconductors.

Two-dimensional (2D) semiconductors have grown fast into an extraordinary research field due to their unique physical properties compared to other semiconducting materials. The class of materials proved extremely fertile for both fundamental studies and a wide range of applications from electronics/spintronics/optoelectronics to photocatalysis and COreduction. 2D materials are highly confined in the out-of-plane direction and often possess very good environmental stability.

Spectroscopic insight into post-synthetic surface modification of porous glass beads as a silica model system.

Applications in catalysis, adsorption and separation require high surface areas as provided by mesoporous materials. Particularly attractive is the class of silica-based mesoporous glasses, which are mechanically and chemically very stable and post-synthetically modifiable allowing specific surface properties to be introduced. One of the catalytically relevant moieties is the sulfonic acid group.