Tunable Properties of Non-Volatile Magnetic Mixtures on Different Surfaces.

In this work, the surface nature-dependent behaviors of magnetic deep eutectic solvents (MDESs) and magnetic low-transition-temperature non-volatile mixtures (MLTTMs) are reported for the first time. It has been observed that the surface of the material where the MDES or the MLTTM is placed could considerably affect the dispersion and the magnetic and structural properties of these magnetic mixtures. Different techniques and analyses have been carried out to highlight the differences observed in the properties depending on the material on which these magnetic mixtures are placed.

Unlocking the Potential of Deep Eutectic Solvents and Ligand-to-Metal Charge Transfer Processes: A Reusable Iron-and-UV-Based System for Sustainable C-C Bond Formation.

Catalytic C-H functionalization has provided new opportunities to access novel organic molecules more sustainably and efficiently. However, these procedures typically rely on precious metals or complex organic catalysts as well as on hazardous solvents or reaction conditions. Herein, a pioneering methodology for direct C-C bond formation enabled by Ligand-to-Metal Charge Transfer (LMCT) and mediated by UV irradiation has been developed using Deep Eutectic Solvents (DESs) as sustainable reaction media.

Sustainable Synthesis of the Active Pharmaceutical Ingredient Atenolol in Deep Eutectic Solvents.

Atenolol, one of the top five best-selling drugs in the world today used to treat angina and hypertension, and to reduce the risk of death after a heart attack, faces challenges in current synthetic methods to address inefficiencies and environmental concerns. The traditional synthesis of this drug involves a process that generates a large amount of waste and other by-products that need disposal. This study presents a one-pot DES-based sustainable protocol for synthesizing atenolol.

Determination of Fe, Cu, and Pb in edible oils using choline chloride:ethylene glycol deep eutectic solvent-based dispersive liquid-liquid microextraction associated with microwave-induced plasma optical emission spectrometry.

A new simple, fast and environmentally friendly deep eutectic solvent based dispersive liquid-liquid microextraction (DES-based DLLME) methodology assisted by vortex is presented for the separation and preconcentration of three elements (i.e., Fe, Cu and Pb) from edible oil samples (i.

Dispersive liquid-liquid microextraction based on deep eutectic solvent for elemental impurities determination in oral and parenteral drugs by inductively coupled plasma optical emission spectrometry.

A simple, fast, sensitive and green pretreatment method for determination of Cd, Co, Hg, Ni, Pb and V in oral and parenteral drug samples using inductively coupled plasma optical emission spectrometry (ICP OES) has been developed. According to United States Pharmacopoeia (USP), those metals must be reported in all pharmaceutical products for quality control evaluation (i.e.

New guidelines for testing "Deep eutectic solvents" toxicity and their effects on the environment and living beings.

Deep eutectic solvents (DESs) were described at the beginning of this century as an alternative to ionic liquids (ILs) in green chemistry. Despite their obvious sustainable advantages as reaction media, there is still controversy about their potential toxicity. Most of the ecotoxicity assays done up to now involving DESs are based on antibiograms.

Palladium Mesoionic Carbene Pre-catalyst for General Cross-Coupling Transformations in Deep Eutectic Solvents.

A strong σ-donor mesoionic carbene ligand has been synthesized and applied to four different palladium-catalyzed cross-coupling transformations, proving the catalyst/medium compatibility and the increased activity of this system over previous reports in Deep Eutectic Solvent medium. Some cross-coupling processes could be carried out at room temperature and using aryl chlorides as starting materials. The possible implementation of multistep synthesis in eutectic mixtures has also been explored.

Deep Eutectic Solvents as Reaction Media for the Palladium-Catalysed C-S Bond Formation: Scope and Mechanistic Studies.

A unique jigsaw catalytic system based on deep eutectic solvents and palladium nanoparticles where C-S bonds are formed from aryl boronic acids and sodium metabisulfite, is introduced. The functionalization step is compatible with a broad spectrum of reagents such as nucleophiles, electrophiles or radical scavengers. This versatile approach allows the formation of different types of products in an environmentally friendly medium by selecting the components of the reaction, which engage one with another as pieces in a jigsaw.

Recent Advances in Asymmetric Organocatalyzed Conjugate Additions to Nitroalkenes.

The asymmetric conjugate addition of carbon and heteroatom nucleophiles to nitroalkenes is a very interesting tool for the construction of highly functionalized synthetic building blocks. Thanks to the rapid development of asymmetric organocatalysis, significant progress has been made during the last years in achieving efficiently this process, concerning chiral organocatalysts, substrates and reaction conditions. This review surveys the advances in asymmetric organocatalytic conjugate addition reactions to α,β-unsaturated nitroalkenes developed between 2013 and early 2017.

First practical cross-alkylation of primary alcohols with a new and recyclable impregnated iridium on magnetite catalyst.

A new impregnated iridium on magnetite catalyst has been prepared, characterized, used and recycled, up to ten times with practically the same activity, for the first practical cross-alkylation of primary alcohols. The catalyst showed a wide reaction scope, is easy to prepare and handle, and it could be removed from the reaction medium just by magnetic sequestering.

Impregnated ruthenium on magnetite as a recyclable catalyst for the N-alkylation of amines, sulfonamides, sulfinamides, and nitroarenes using alcohols as electrophiles by a hydrogen autotransfer process.

Various impregnated metallic salts on magnetite have been prepared, including cobalt, nickel, copper, ruthenium, and palladium salts, as well as a bimetallic palladium-copper derivative. Impregnated ruthenium catalyst is a versatile, inexpensive, and simple system for the selective N-monoalkylation of amino derivatives with poor nucleophilic character, such as aromatic and heteroaromatic amines, sulfonamides, sulfinamides, and nitroarenes, using in all cases alcohols as the initial source of the electrophile, through a hydrogen autotransfer process. In the case of sulfinamides, this is the first time that these amino compounds have been alkylated following this strategy, allowing the use of chiral sulfinamides and secondary alcohols to give the alkylated compound with a diastereomeric ratio of 92:8.

Transition-metal-free O-, S-, and N-arylation of alcohols, thiols, amides, amines, and related heterocycles.

A new protocol for the Ullmann-type arylation process of different aromatic heterocycles without any transition-metal catalyst, implying the use of a combination of an excess of potassium hydroxide and dimethyl sulfoxide, is described. The reaction can be performed between a broad range of starting nucleophiles including phenol, alcohols, amines, nitrogen-containing five-membered systems such as pyrazoles, imidazoles, and indoles, and amides with haloarenes, iodide and bromide derivatives giving the best results, the possible pathway involving the in situ generation of the corresponding benzyne intermediate. When the reaction was performed with 2-iodoaniline and either carboxamides or isothiocyanato derivatives, the corresponding benzoazole derivatives were obtained.

Impregnated copper on magnetite as recyclable catalyst for the addition of alkoxy diboron reagents to C-C double bonds.

A simple protocol for the borylation with use of impregnated copper on magnetite is described. The reactions showed a very broad scope and all type of olefins could be used with similar results. The catalyst could be easily removed by a magnet and it could be reused several times, showing similar activity.

Impregnated copper on magnetite: an efficient and green catalyst for the multicomponent preparation of propargylamines under solvent free conditions.

Impregnated copper on magnetite is a versatile, inexpensive and simple catalyst for the selective multicomponent reaction of terminal alkynes, aldehydes and secondary amines to give the corresponding propargylamines with excellent yields. The catalyst can be easily recovered and reused by using a simple magnet. The process could be repeated up to ten times without losing its activity.

Efficiency in chemistry: from hydrogen autotransfer to multicomponent catalysis.

A hydrogen autotransfer reaction has been applied to the α-alkylation of ketones, with primary alcohols as the electrophilic component, either under homogeneous (using a Ru complex as catalyst) or under heterogeneous (using Ni nanoparticles) conditions. This process is both very efficient (concerning atom economy) and ecologically friendly (water as the only by-product generated). On the other hand, three multicomponent reactions, namely, the Strecker reaction (without any catalyst), the aza-Sakurai process (catalyzed by ferrite), and the addition of in situ generated Zn enolates to chiral sulfinylimines (catalyzed by Cu), have proven to be very efficient in the generation of a diversity of polyfunctionalized molecules.

Selective N-monoalkylation of aromatic amines with benzylic alcohols by a hydrogen autotransfer process catalyzed by unmodified magnetite.

A new catalyst for an old material: magnetite is a good catalyst for the selective N-alkylation of aromatic amines using benzylic alcohols as electrophiles. The process could be repeated up to eight times without losing effectiveness. The catalyst recycling is very easy, using a simple magnet.

Transition-metal-free indirect friedlander synthesis of quinolines from alcohols.

The synthesis of polysubstituted quinolines can be easily and greenly accomplished by the direct reaction between the corresponding 2-aminobenzylic alcohol derivative and either a ketone or alcohol in the presence of a base, without any transition-metal catalyst.

Alcohols as electrophiles in C--C bond-forming reactions: the hydrogen autotransfer process.

The hydrogen autotransfer process involves an initial oxidative hydrogen elimination, followed by different types of reactions, and is completed with a reductive hydrogen addition to give the final product. The sequence allows the alkylation of different nucleophilic agents using environmentally benign alcohols as electrophiles, mild conditions, and soft bases, with water produced as the only waste material. Recent examples of modulating the organometallic catalyst have also lent themselves to expansion of the range of available substrates, as described in this Minireview.

trans-1-Sulfonylamino-2-isoborneolsulfonylaminocyclohexane derivatives: excellent chiral ligands for the catalytic enantioselective addition of organozinc reagents to ketones.

The catalytic enantioselective addition of different organozinc reagents (such as alkyl and aryl derivatives or in situ generated aryl, allyl alkenyl, and alkynyl derivatives obtained through different transmetallation processes) to simple ketones has been accomplished by using titanium tetraisopropoxide and chiral ligands derived from substituted trans-1-sulfonylamino-2-isoborneolsulfonylaminocyclohexane, producing the corresponding tertiary alcohols with enantiomeric excesses (ee) up to >99 %. A simple and efficient procedure for the synthesis of the chiral ligands used in these reactions is described.

Asymmetric multicomponent reactions (AMCRs): the new frontier.

Asymmetric multicomponent reactions involve the preparation of chiral compounds by the reaction of three or more reagents added simultaneously. This kind of addition and reaction has some advantages over classic divergent reaction strategies, such as lower costs, time, and energy, as well as environmentally friendlier aspects. All these advantages, together with the high level of stereoselectivity attained in some of these reactions, will force chemists in industry as in academia to adopt this new strategy of synthesis, or at least to consider it as a viable option.

Shape-persistent nanosize organometallic complexes: synthesis and application in a nanofiltration membrane reactor.

Shape-persistent multi(NCN-palladium and/or -platinum) complexes having one- (5 and 6), two- (1 and 2), and three-dimensional (3 and 4) geometries were prepared in moderate to good yields. Two different approaches were used to construct the multimetallic materials: (i) the construction of the multisite ligands followed by the permetalation step and (ii) selective and mild one-pot coupling of monometallic buiding blocks to a multifunctional shape-persistent organic core molecule. The first approach was used to prepare the palladated and/or platinated tris- (2) and bis(NCN-pincer) (5) complexes, while the second approach afforded the palladated and platinated octakis- (3) and dodecakis(NCN-pincer) (4) complexes.