Polarization maintaining single-mode low-loss hollow-core fibres.

Hollow-core fibre (HCF) is a powerful technology platform offering breakthrough performance improvements in sensing, communications, higher-power pulse delivery and other applications. Free from the usual constraints on what materials can guide light, it promises qualitatively new and ideal operating regimes: precision signals transmitted free of nonlinearities, sensors that guide light directly in the samples they are meant to probe and so on. However, these fibres have not been widely adopted, largely because uncontrolled coupling between transverse and polarization modes overshadows their benefits.

Seven-core erbium-doped double-clad fiber amplifier pumped simultaneously by side-coupled multimode fiber.

We demonstrate a seven-core erbium-doped fiber amplifier in which all the cores were pumped simultaneously by a side-coupled tapered multimode fiber. The amplifier has multicore (MC) MC inputs and MC outputs, which can be readily spliced to MC transmission fiber for amplifying space division multiplexed signals. Gain over 25 dB was obtained in each of the cores over a 40-nm bandwidth covering the C-band.

Higher-order mode fiber enables high energy chirped-pulse amplification.

Energy scaling of femtosecond fiber lasers has been constrained by nonlinear impairments and optical fiber damage. Reducing the optical irradiance inside the fiber by increasing mode size lowers these effects. Using an erbium-doped higher-order mode fiber with 6000 µm(2) effective area and output fundamental mode re-conversion, we show a breakthrough in pulse energy from a monolithic fiber chirped pulse amplification system using higher-order mode propagation generating 300 µJ pulses with duration <500 fs (FWHM) and peak power >600 MW at 1.

Scaling the effective area of higher-order-mode erbium-doped fiber amplifiers.

We demonstrate scaling of the effective area of higher-order mode, Er-doped fiber amplifiers. Two Er-doped higher-order mode fibers, one with 3800 μm(2) A(eff) in the LP(0,11) mode, and one with 6000 μm(2) effective area in the LP(0,14) mode, are demonstrated. Output beam profiles show clean higher order modes, and S(2) imaging measurements show low extraneous higher order mode content.

Measuring higher-order modes in a low-loss, hollow-core, photonic-bandgap fiber.

We perform detailed measurements of the higher-order-mode content of a low-loss, hollow-core, photonic-bandgap fiber. Mode content is characterized using Spatially and Spectrally resolved (S2) imaging, revealing a variety of phenomena. Discrete mode scattering to core-guided modes are measured at small relative group-delays.

Cladding-pumped erbium-doped multicore fiber amplifier.

A cladding pumped multicore erbium-doped fiber amplifier for simultaneous amplification of 6 channels is demonstrated. Peak gain over 32 dB has been obtained at a wavelength of 1560 nm and the bandwidth measured at 20-dB gain was about 35 nm. Numerical modeling of cladding pumped multicore erbium-doped amplifier was also performed to study the properties of the amplifier.

WDM/SDM transmission of 10 x 128-Gb/s PDM-QPSK over 2688-km 7-core fiber with a per-fiber net aggregate spectral-efficiency distance product of 40,320 km·b/s/Hz.

We demonstrate 2688-km multi-span transmission using wavelength-division multiplexing (WDM) of ten 50-GHz spaced 128-Gb/s PDM-QPSK signals, space-division multiplexed (SDM) in a low-crosstalk 76.8-km seven-core fiber, achieving a record net aggregate per-fiber-spectral-efficiency-distance product of 40,320 km·b/s/Hz. The demonstration was enabled by a novel core-to-core signal rotation scheme implemented in a 7-fold, synchronized recirculating loop apparatus.

1.12-Tb/s 32-QAM-OFDM superchannel with 8.6-b/s/Hz intrachannel spectral efficiency and space-division multiplexed transmission with 60-b/s/Hz aggregate spectral efficiency.

We demonstrate the generation of a 1.12-Tb/s superchannel based on coherent optical orthogonal frequency-division multiplexing with polarization-division multiplexed 32-QAM subcarriers, achieving a net intrachannel-spectral-efficiency (ISE) of 8.6 b/s/Hz.

Amplification and noise properties of an erbium-doped multicore fiber amplifier.

A multicore erbium-doped fiber (MC-EDF) amplifier for simultaneous amplification in the 7-cores has been developed, and the gain and noise properties of individual cores have been studied. The pump and signal radiation were coupled to individual cores of MC-EDF using two tapered fiber bundled (TFB) couplers with low insertion loss. For a pump power of 146 mW, the average gain achieved in the MC-EDF fiber was 30 dB, and noise figure was less than 4 dB.

112-Tb/s space-division multiplexed DWDM transmission with 14-b/s/Hz aggregate spectral efficiency over a 76.8-km seven-core fiber.

We describe a new multicore fiber (MCF) having seven single-mode cores arranged in a hexagonal array, exhibiting low crosstalk among the cores and low loss across the C and L bands. We experimentally demonstrate a record transmission capacity of 112 Tb/s over a 76.8-km MCF using space-division multiplexing and dense wavelength-division multiplexing (DWDM).

Characterization of diverse subvariants of the meningococcal factor H (fH) binding protein for their ability to bind fH, to mediate serum resistance, and to induce bactericidal antibodies.

Neisseria meningitidis is a commensal of the human nasopharynx but is also a major cause of septicemia and meningitis. The meningococcal factor H binding protein (fHbp) binds human factor H (fH), enabling downregulation of complement activation on the bacterial surface. fHbp is a component of two serogroup B meningococcal vaccines currently in clinical development.

Raman fiber laser with 81 W output power at 1480 nm.

We demonstrate a Raman fiber laser with an operating wavelength of 1480 nm and record output power of 81 W. High-power operation is enabled by a long-period grating used to frustrate backward lasing at the Stokes wavelength in the Yb-doped fiber amplifier. A cascaded Raman fiber with a long-wavelength fundamental mode cutoff enables efficient multiple Stokes scattering from 1117 to 1480 nm while preventing further unwanted scattering to 1590 nm.

A higher-order-mode erbium-doped-fiber amplifier.

We demonstrate the first erbium-doped fiber amplifier operating in a single, large-mode area, higher-order mode. A high-power, fundamental-mode, Raman fiber laser operating at 1480 nm was used as a pump source. Using a UV-written, long-period grating, both pump and 1564 nm signal were converted to the LP(0,10) mode, which had an effective area of 2700 microm(2) at 1550 nm.

Seven-core multicore fiber transmissions for passive optical network.

We design and fabricate a novel multicore fiber (MCF), with seven cores arranged in a hexagonal array. The fiber properties of MCF including low crosstalk, attenuation and splice loss are described. A new tapered MCF connector (TMC), showing ultra-low crosstalk and losses, is also designed and fabricated for coupling the individual signals in-and-out of the MCF.

Coherence of supercontinua generated by ultrashort pulses compressed in optical fibers.

Femtosecond fiber lasers together with nonlinear fibers are compact, reliable, all-fiber supercontinuum sources. Maintaining an all-fiber configuration, however, necessitates pulse compression in an optical fiber, which can lead to nonlinearities for subhundred femtosecond, nanojoule pulses. In this work we show that using large-mode-area fibers for pulse compression mitigates the nonlinearity, resulting in compressed pulses with significantly reduced satellite pulses.

Visible continuum generation using a femtosecond erbium-doped fiber laser and a silica nonlinear fiber.

Supercontinuum extending to visible wavelengths is generated in a hybrid silica nonlinear fiber pumped at 1560 nm by a femtosecond, erbium-doped fiber laser. The hybrid nonlinear fiber consists of a short length of highly nonlinear, germano-silicate fiber (HNLF) spliced to a length of photonic crystal fiber (PCF). A 2 cm length of HNLF provides an initial stage of continuum generation due to higher-order soliton compression and dispersive wave generation before launching into the PCF.

Propagation of femtosecond pulses in large-mode-area, higher-order-mode fiber.

We demonstrate propagation of 14 nJ femtosecond pulses through a large-mode-area, higher-order-mode (HOM) fiber with an effective area of 2100 microm2. The pulses propagate stably in the LP07 mode of the fiber through lengths as long as 12 m. The strongly chirped pulses exiting the amplifier fiber are dechirped by the high-order-mode fiber, resulting in pulses with a peak power of 61 kW after propagation in 5 m of the positive-dispersion fiber.

Anomalous dispersion in a solid, silica-based fiber.

We demonstrate an all-solid (nonholey), silica-based fiber with anomalous dispersion at wavelengths where silica material dispersion is negative. This is achieved by exploiting the enhanced dispersion engineering capabilities of higher-order modes in a fiber, yielding + 60 ps/nm km dispersion at 1080 nm. By coupling to the desired higher-order mode with low-loss in-fiber gratings, we realize a 5 m long fiber module with a 300 fs/nm dispersion that yields a 1 dB bandwidth of 51 nm with an insertion loss of approximately 0.

Light propagation with ultralarge modal areas in optical fibers.

We demonstrate robust single-transverse-mode light propagation in higher-order modes of a fiber, with effective area A(eff) ranging from 2,100 to 3,200 microm(2). These modes are accessed using long-period fiber gratings that enable higher-order-mode excitation over a bandwidth of 94 mm with greater than 99% of the light in the desired mode. The fiber is designed such that the effective index separation between modes is always large, hence minimizing in-fiber mode mixing and enabling light propagation over lengths as large as 12 m, with bends down to 4.

High-energy (nanojoule) femtosecond pulse delivery with record dispersion higher-order mode fiber.

Delivery of high peak-power femtosecond pulses with fibers is constrained by nonlinear distortions accumulated during pulse propagation. We address this problem with a novel, to our knowledge, fiber schematic, where the pulse propagates in a small Aeff (18 microm2) but highly dispersive (record value of approximately -900 ps/nm km) medium, enabled by transmission in the LP02 mode of a few-mode fiber. The novel fiber yields a low dispersion-to-nonlinear-length ratio (due to its large dispersion) despite its small Aeff, hence enabling mitigation of nonlinearities.

Lifting polarization degeneracy of modes by fiber design: a platform for polarization-insensitive microbend fiber gratings.

Polarization dependence in microbend gratings is an inherent problem, even in perfectly circular fibers, since antisymmetric modes are almost degenerate linear combinations of four distinct, polarization-sensitive modes. We demonstrate a novel fiber design that lifts polarization degeneracies of the antisymmetric modes to solve this problem. By intentionally exacerbating the polarization splittings, we achieve coupling to only the polarization-insensitive doublet, over wavelength ranges exceeding 100 nm, thus demonstrating a device with practical usable bandwidths.

All-fiber, octave-spanning supercontinuum.

We present an all-fiber supercontinuum source based on a passively mode-locked erbium fiber laser and a small-effective-area, germanium-doped silica fiber. The parallels between this system and the continuum generated in microstructured fibers with 800-nm pulses are discussed, and the role of dispersion is investigated experimentally. We construct a hybrid fiber by fusion splicing lengths of different-dispersion fiber together, generating more than an octave of bandwidth.

Accurate noncontact optical fiber diameter measurement with spectral interferometry.

A new technique using spectral interferometry to measure optical fiber dimensions with interferometric accuracy better than 0.01 micrometer is presented. The method can potentially be used for online monitoring and control during fiber draw.