Publications by authors named "Di-Yan Wang"

New perovskite materials of two-dimensional (2D) all-inorganic Ruddlesden-Popper (RP) perovskite CsPbI nanosheets were successfully obtained from the structural transformation of 2D PR-phase CsPbI nanosheets. The 2D RP-phase CsPbI perovskite nanosheets exhibited unique green emission with an emission wavelength of ∼500 nm. The crystal structure of the 2D RP-phase CsPbI perovskite nanosheets was determined by powder X-ray diffraction (XRD), high-resolution transmission electron microscopy, and atomic force microscopy.

View Article and Find Full Text PDF

Triple-negative breast cancer (TNBC) is considered more aggressive with a poorer prognosis than other breast cancer subtypes. Through systemic bioinformatic analyses, we established the ferroptosis potential index (FPI) based on the expression profile of ferroptosis regulatory genes and found that TNBC has a higher FPI than non-TNBC in human BC cell lines and tumor tissues. To exploit this finding for potential patient stratification, we developed biologically amenable phototheranostic iron pyrite FeS nanocrystals (NCs) that efficiently harness near-infrared (NIR) light, as in photovoltaics, for multispectral optoacoustic tomography (MSOT) and photothermal ablation with a high photothermal conversion efficiency (PCE) of 63.

View Article and Find Full Text PDF

Electroluminescence (EL) from the singlet-excited (S) state is the ideal choice for stable, high-performing deep-blue organic light-emitting diodes (OLEDs) owing to the advantages of an adequately short radiative lifetime, improved device durability, and low cost, which are the most important criteria for their commercialization. Herein, we present the design and synthesis of three donor-acceptor-donor (D-A-D)-configured deep-blue fluorescent materials (denoted as , , and ) composed of a thioxanthone or diphenyl sulfonyl acceptor and phenyl carbazolyl donor. These systems exhibit strong deep-blue photoluminescence (422-432 nm) in solutions and redshifted emission (472-486 nm) in thin films.

View Article and Find Full Text PDF

Two-dimensional (2D) all-inorganic Ruddlesden-Popper (RP) perovskite CsPbI nanosheets (NSs) were successfully developed for the first time by employing a structural recrystallization process with additional passivation of small organic sulfide molecules. The structure of CsPbI NSs is confirmed by powder X-ray diffraction measurements, atomically-resolved STEM measurements and atomic force microscopy (AFM) studies. CsPbI NSs with a specific value of 6 exhibits unique absorption and emission spectra with intense excitons at 560 nm due to quantum confinement effects in 2D perovskite slabs.

View Article and Find Full Text PDF

Various types of 2D organic-inorganic perovskite solar cells have been developed and investigated due to better electron transport behavior and environmental stability. Controlling the formation of phases in the 2D perovskite films has been considered to play an important role in influencing the stability of perovskite materials and their performance in optoelectronic applications. In this work, Lewis base urea was used as an effective additive for the formation of 2D Ruddlesden-Popper (RP) perovskite (BA)(MA)PbI thin film with mixed phases (n = 2~4).

View Article and Find Full Text PDF

In contrast to the 2D organic-inorganic hybrid Ruddlesden-Popper halide perovskites (RPP), a new class of 2D all inorganic RPP (IRPP) has been recently proposed by substituting the organic spacers with an optimal inorganic alternative of cesium cations (Cs ). Nevertheless, the synthesis of high-membered 2D IRPPs (n > 1) has been a very challenging task because the Cs need to act as both spacers and A-site cations simultaneously. This work presents the successful synthesis of stable phase-pure high-membered 2D IRPPs of Cs Pb Br nanosheets (NSs) with n = 3 and 4 by employing the strategy of using additional strong binding bidentate ligands.

View Article and Find Full Text PDF

Metal halide perovskites have attracted great attention for their superior light energy conversion applications. Herein, we demonstrated a facile synthesis of zero-dimensional Sn perovskite CsMSnBr(M = K and Rb) material through the cation transformation reaction at room temperature. CsSnBr NCs was mixed with pure metal bromide salts (KBr and RbBr) via the mechanochemical process to successfully synthesize CsMSnBr perovskite where transformation of Cs to mixed Cs/Rb and mixed Cs/K was achieved.

View Article and Find Full Text PDF

Nitrate (NO) reduction reaction (NtRR) is considered as a green alternative method for the conventional method of NH synthesis (Haber-Bosch process), which is known as a high energy consuming and large CO emitting process. Herein, the copper nanodendrites (Cu NDs) grown along with the {200} facet as an efficient NtRR catalyst have been successfully fabricated and investigated. It exhibited high Faradaic efficiency of 97% at low potential (-0.

View Article and Find Full Text PDF

This work demonstrates the strong excitonic magneto-optic (MO) effects of magnetic circular dichroism (MCD) and Faraday rotation (FR) in nonmagnetic two-dimensional (2D) organic-inorganic hybrid Ruddlesden-Popper perovskites (RPPs) at room temperature. Due to their strong and sharp excitonic absorption as a result of unique quantum well structures of 2D RPPs, sizeable linear excitonic MO effects of MCD and FR can be observed at room temperature under a low magnetic field (<1 T) compared with their three-dimensional counterpart. In addition, since the band gaps of 2D organic-inorganic hybrid perovskites can be manipulated either by changing the number of inorganic octahedral slabs per unit cell or through halide engineering, linear excitonic MO effects of 2D-RPPs can be observed through the broadband spectral ranges of visible light.

View Article and Find Full Text PDF

Purpose: Antibiotic resistance issues associated with microbial pathogenesis are considered to be one of the most serious current threats to health. Fortunately, TiO, a photoactive semiconductor, was proven to have antibacterial activity and is being widely utilized. However, its use is limited to the short range of absorption wavelength.

View Article and Find Full Text PDF

Global population explosion has led to the rapid revolution of science and technology, and the high energy demand has necessitated new and efficient energy conversion and storage systems. Lithium ion batteries (LIBs) have a high potential window, high capacity, and high stability, but suffer from high cost and low safety. Therefore, many alternative batteries, including sodium ion batteries (NIBs), potassium (KIBs), aluminum (AIBs), and dual ion batteries (DIBs), have been introduced.

View Article and Find Full Text PDF

High demand for green ecosystems has urged the human community to reconsider and revamp the traditional way of synthesis of several compounds. Ammonia (NH ) is one such compound whose applications have been extended from fertilizers to explosives and is still being synthesized using the high energy inhaling Haber-Bosch process. Carbon free electrocatalytic nitrogen reduction reaction (NRR) is considered as a potential replacement for the Haber-Bosch method.

View Article and Find Full Text PDF

Intensive energy demand urges state-of-the-art rechargeable batteries. Rechargeable aluminum-ion batteries (AIBs) are promising candidates with suitable cathode materials. Owing to high abundance of carbon, hydrogen, and oxygen and rich chemistry of organics (structural diversity and flexibility), small organic molecules are good choices as the electrode materials for AIB.

View Article and Find Full Text PDF

An outbreak of a bacterial contagion is a critical threat for human health worldwide. Recently, light-activated heterostructured nanomaterials (LAHNs) have shown potential as antibacterial agents, owing to their unique structural and optical properties. Many investigations have revealed that heterostructured nanomaterials are potential antibacterial agents under light irradiation.

View Article and Find Full Text PDF

Recently, aluminum ion batteries (AIBs) have attracted great attention across the globe by virtue of their massive gravimetric and volumetric capacities in addition to their high abundance. Though carbon derivatives are excellent cathodes for AIBs, there is much room for further development. In this study, flexuous graphite (FG) was synthesized by a simple thermal shock treatment, and for the first time, an Al/FG battery was applied as a cathode for AIBs to reveal the real-time intercalation of AlCl into FG with high flexibility by using in-situ scanning electron microscope (SEM) measurements exclusively.

View Article and Find Full Text PDF

The generation of ammonia, hydrogen production, and nitrogen purification are considered as energy intensive processes accompanied with large amounts of CO emission. An electrochemical method assisted by photoenergy is widely utilized for the chemical energy conversion. In this work, earth-abundant iron pyrite (FeS ) nanocrystals grown on carbon fiber paper (FeS /CFP) are found to be an electrochemical and photoactive catalyst for nitrogen reduction reaction under ambient temperature and pressure.

View Article and Find Full Text PDF

A powerful technique to detect bone biomarkers has been developed for assessment of osteoporosis at the early stage. Two-dimensional multilayered gold-nanoparticle thin film (MTF-AuNPs) was demonstrated as a promising test platform for detection of bone biomarker, hydroxyproline (HYP), measured by surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS). With strong surface plasmon resonance and excellent homogeneity, facilely prepared, highly ordered, and large-scale MTF-AuNPs revealed high sensitivity of HYP in the SALDI-MS measurement without additional matrixes, such as α-cyano-4-hydroxycinnamic acid (CHCA) and 2,5-dihydroxybenzoic acid (DHB).

View Article and Find Full Text PDF

In hybrid organic-inorganic and all-inorganic metal halide perovskite nanomaterials, two-dimensional (2D) Ruddlesden-Popper (RP) perovskites have become one of the most interesting materials because of tunable bandgaps varied with the layer thickness, effective modulation of the electron-hole confinement, and high stability. Here, we report a one-pot synthesis of 2D RP perovskite (BA)(MA)PbX (BA = 1-butylammonium, MA = methylammonium, X = Br or I) quantum dots (QDs) with an average size of 10 nm at room temperature. The (BA)(MA)PbBr (Br series) QDs and (BA)(MA)PbI (I series) QDs exhibited tunable emitting spectrum in the range of 410-523 nm and 527-761 nm, respectively, with full width at half maximum (FWHM) of 12-75 nm.

View Article and Find Full Text PDF

The glucose metabolism rate in cancer cells is a crucial piece of information for the cancer aggressiveness. A feasible method to monitor processes of oncogenic mutations has been demonstrated in this work. The fluorescent gold nanoclusters conjugated with glucose (glucose-AuNCs) were successfully synthesized as a cancer-targeting probe for glucose transporters (Gluts) overexpressed by U-87 MG cancer cells, which can be observed under confocal microscopy.

View Article and Find Full Text PDF
Article Synopsis
  • * Large-scale Langmuir-Blodgett films made of silver nanocrystals (cubes, cuboctahedra, octahedra) were developed, showing improved efficiency for glucose detection without needing extra materials.
  • * The results indicated significantly enhanced signal quality and reproducibility when using these films compared to traditional matrices, with silver cuboctahedra showing a notable 5.7% relative signal improvement, making these films promising for commercial use in SALDI MS.
View Article and Find Full Text PDF

Recently, interest in aluminium ion batteries with aluminium anodes, graphite cathodes and ionic liquid electrolytes has increased; however, much remains to be done to increase the cathode capacity and to understand details of the anion-graphite intercalation mechanism. Here, an aluminium ion battery cell made using pristine natural graphite flakes achieves a specific capacity of ∼110 mAh g with Coulombic efficiency ∼98%, at a current density of 99 mA g (0.9 C) with clear discharge voltage plateaus (2.

View Article and Find Full Text PDF

Hydrogen is considered as sustainable and environmentally friendly energy for global energy demands in the future. Here a Co-FeS catalyst with surface phosphide doping (P/Co-FeS ) for hydrogen evolution reaction (HER) in acidic solutions is developed. The P/Co-FeS exhibits superior HER electrochemical performance with overpotential of -90 mV at 100 mA cm and Tafel slope of 41 mV/decade and excellent durability.

View Article and Find Full Text PDF

A 3D graphitic foam vertically aligned graphitic structure and a low density of defects is derived through chloroaluminate anion intercalation of graphite followed by thermal expansion and electrochemical hydrogen evolution. Such aligned graphitic structure affords excellent Al-ion battery characteristics with a discharge capacity of ≈60 mA h g under a high charge and discharge current density of 12 000 mA g over ≈4000 cycles.

View Article and Find Full Text PDF

The design of active and stable semiconducting composites with enhanced photoresponse from visible light to near infrared (NIR) is a key to improve solar energy harvesting for photolysis of water in photoelectrochemical cell. In this study, we prepared earth abundant semiconducting composites consisting of iron pyrite and Titanium oxide as a photoanode (FeS2/TiO2 photoanode) for photoelectrochemical applications. The detailed structure and atomic compositions of FeS2/TiO2 photoanode was characterized by high-resolution transmission electron microscopy (HRTEM), energy-dispersive X-ray spectroscopy (EDS), powder X-ray diffraction (XRD), inductively coupled plasma with atomic emission spectroscopy (ICPAES) and Raman spectroscopy.

View Article and Find Full Text PDF

New silicon based anodic materials in lithium ion batteries (Si-based LIBs) have been developed worldwide to overcome capacity decay during the lithiation/delithiation process. In this study, a composite of Si nanoparticles coated with 5-sulfoisophthalic acid (SPA) doped polyaniline (core/shell SiNPs@PANi/SPA) was prepared and applied as an anode material for LIB applications. The detailed structure of the core/shell SiNPs@PANi/SPA composite was characterized using high-resolution scanning electron microscopy before and after charging/discharging.

View Article and Find Full Text PDF