Experimental and computational approach on the development of a new Green corrosion inhibitor formulation for N80 steel in 20% formic acid.

Organic acids are employed as scale dissolvers in the oil & gas industry during production to stimulate oil recovery by pumping in the formations. Corrosion of metallic surfaces in organic acid solutions poses a significant issue in the oil and gas sector. In recent years, considering the stringent environmental regulations, there has been a growing research interest in environmentally safe inhibitors.

Polyethyleneimine Functionalized Graphene Oxide: A Promising Inhibitor for Corrosion of Copper in the Hydrochloric Acid Environment.

Polyethyleneimine functionalized graphene oxide (PEI-GO) was prepared and characterized for its molecular structure and morphology. The PEI-GO is, for the first time, reported as an inhibitor against copper (Cu) corrosion in 0.5 M HCl using electrochemical studies.

Electrochemical and Computational Insights on the Application of Expired Metformin Drug as a Novel Inhibitor for the Sweet Corrosion of C1018 Steel.

An expired metformin drug (MET) was used as a corrosion inhibitor for C1018 carbon steel in a CO-saturated 3.5 wt % NaCl + 340 ppm acetic acid solution under static conditions. The inhibitor was evaluated using electrochemical methods complemented with surface analytical measurements and computational modeling.

Cinnamaldehyde-modified chitosan as a bio-derived corrosion inhibitor for acid pickling of copper: Microwave synthesis, experimental and computational study.

Chitosan (CS) was cross-linked using cinnamaldehyde (Cinn) in a single step procedure following microwave irradiation to produce cinnamaldehyde-modified chitosan (Cinn-CS). The synthesized Cinn-CS was used as a novel corrosion inhibitor for copper in 1 M hydrochloric acid. A comprehensive electrochemical investigation using the impedance measurements, and potentiodynamic polarization was undertaken, supported with surface analysis and computational studies.

The synergistic influence of polyethyleneimine-grafted graphene oxide and iodide for the protection of steel in acidizing conditions.

Herein, graphene oxide (GO) was chemically functionalized with polyethyleneimine (PEI) in a single step to obtain PEI-GO, which was characterized FTIR spectroscopy, SEM, and TEM. Additionally, for the first time, PEI-GO was employed for the corrosion mitigation of carbon steel in a solution of 15% HCl. The corrosion performance of the inhibitor was evaluated by utilizing weight loss tests, electrochemical measurements with impedance analysis, electrochemical frequency modulation, and potentiodynamic polarization studies.

Chitosan-cinnamaldehyde Schiff base: A bioinspired macromolecule as corrosion inhibitor for oil and gas industry.

A Schiff base of chitosan with cinnamaldehyde (Cinn-Cht) was synthesized in a single step using microwave irradiation and characterized using spectroscopic techniques. The synthesized Schiff base was used for the mitigation of carbon steel corrosion in 15% HCl. The corrosion evaluation was performed using weight loss tests, electrochemical impedance measurements, and polarization studies.

Microwave-assisted synthesis of a new Piperonal-Chitosan Schiff base as a bio-inspired corrosion inhibitor for oil-well acidizing.

A new Schiff base of chitosan, namely Piperonal-chitosan (Pip-Cht), was synthesized for the first time, using a microwave irradiation method and characterized using spectroscopic techniques. The corrosion inhibition behavior of the new Schiff base was evaluated on carbon steel in 15% HCl medium via gravimetric and electrochemical techniques. This is the first work on the application of chemically functionalized chitosan as a corrosion inhibitor in the oil-well acidizing environment.

Aminotriazolethiol-functionalized chitosan as a macromolecule-based bioinspired corrosion inhibitor for surface protection of stainless steel in 3.5% NaCl.

Chitosan was chemically functionalized using aminotriazolethiol in a facile single-step synthesis. The macromolecule was evaluated as an inhibitor for corrosion of stainless steel in 3.5% NaCl solution.

Bis(2-aminoethyl)amine-modified graphene oxide nanoemulsion for carbon steel protection in 15% HCl: Effect of temperature and synergism with iodide ions.

Hypothesis: There is a scarcity of available literature studies on the inhibition of aqueous corrosion using graphene and graphene oxide (GO) due to their poor aqueous solubility. The abundance of oxygen-containing functional groups on the surface of GO offers promising aspects for its chemical modification. Accordingly, we herein report the application of bis(2-aminoethyl)amine-modified graphene oxide (B2AA-GO) as a corrosion inhibitor for carbon steel in industrial oil-well acidizing conditions.

Chitosan Schiff base: an environmentally benign biological macromolecule as a new corrosion inhibitor for oil & gas industries.

An eco-friendly Schiff base, namely Salicylaldeyde-Chitosan Schiff Base (SCSB), was synthesized by the reaction of chitosan and salicylaldehyde. In 3.5% NaCl saturated with carbon dioxide at 65 °C corrosion inhibition effect was analyzed using weight loss, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PDP) methods.

Comprehensive investigation of steel corrosion inhibition at macro/micro level by ecofriendly green corrosion inhibitor in 15% HCl medium.

Hypothesis: In the present time, there is enormous need for environmentally friendly and effective corrosion inhibitor for the acidizing process. During acidization 15% hydrochloric acid is used, which causes corrosion of N80 steel.

Experiments: The present study aims at the synthesis of environmentally benign corrosion inhibitor, namely 2-amino-4-(5-hydroxy-3-methyl-1H-pyrazole-4-yl)-4H-chromene-3-carbonitrile (PCP), and corrosion inhibition evaluation for N80 steel in 15% HCl.

Triazole-modified chitosan: a biomacromolecule as a new environmentally benign corrosion inhibitor for carbon steel in a hydrochloric acid solution.

In this work, a new inhibitor, triazole modified chitosan, was synthesized for the first time following chemical modification of chitosan using 4-amino-5-methyl-1,2,4-triazole-3-thiol. The newly synthesized biopolymer (CS-AMT) was characterized using FTIR and NMR, and then it was evaluated as an inhibitor against corrosion of carbon steel in 1 M hydrochloric acid. The corrosion testing and evaluation were performed thoroughly employing the weight loss method, electrochemical measurements and surface analysis.

Chitosan polymer as a green corrosion inhibitor for copper in sulfide-containing synthetic seawater.

The influence of chitosan on the copper corrosion in sulfide polluted synthetic seawater (SSW) containing 20 ppm of sulfide has been investigated for the first time. Potentiodynamic polarization measurements, electrochemical impedance spectroscopy at the open circuit potential and weight loss measurements were employed to assess the corrosion inhibition ability of chitosan. The impedance studies revealed that in the presence of chitosan at various concentrations, the charge transfer resistance increases.

Thiosemicarbazide and thiocarbohydrazide functionalized chitosan as ecofriendly corrosion inhibitors for carbon steel in hydrochloric acid solution.

Organically functionalized chitosan macromolecules namely Chitosan-Thiosemicarbazide (CS-TS) and Chitosan-Thiocarbohydrazide (CS-TCH) were synthesized and evaluated as new corrosion inhibitors for mild steel corrosion in 1M HCl. The FTIR and H NMR studies confirmed the formation of the derivatives. The corrosion tests were performed using weight loss method, electrochemical measurements, surface morphology (AFM), quantum chemical investigation and molecular dynamics simulation methods.

Role of nanostructured networks as analytical tools for biological systems.

In recent years, nanostructured materials have emerged as potential candidates offering excellent prospects for interfacing the detection of biomolecules. Nanomaterials such as nanoparticles, nanostructured silicates, nano-sized metal oxides, nanostructured polymers, quantum dots, nanocomposites and sensing nanodevices are being utilized worldwide for fabrication of chemical sensors and sensor arrays with tailored characteristics and tuneable properties. Among above, the materials that create a matrix structure at the nanoscale level are particularly fascinating.

3-Glycidoxypropyltrimethoxysilane mediated in situ synthesis of noble metal nanoparticles: application to hydrogen peroxide sensing.

The in situ synthesis is reported of noble metal nanoparticles via 3-glycidoxypropyltrimethoxysilane mediated reduction of 3-aminopropyltrimethoxysilane treated metal salts during sol-gel processing. The method described involves the synthesis of uniform spherical nanoparticles of gold, silver and palladium with controlled size that can be directly utilized for thin film preparation. A detailed study of the synthesis and application of gold nanoparticles to the electrochemical detection of hydrogen peroxide was carried out and reveals that the amplification of hydrogen peroxide sensing is size-dependent.