Optical diffraction properties of three superimposed self-organized nanostructures induced by a laser process.

Controlling the diffraction properties of materials over a large area holds great promise for a wide range of optical applications. Laser-based techniques have emerged as a viable solution to address this need. Here, we present the diffraction properties of laser-induced self-organized structures, which consist of three interlaced grating-like structures: self-organized nanoparticles, self-organized cracks, and laser marking lines.

Hybridization between plasmonic and photonic modes in laser-induced self-organized quasi-random plasmonic metasurfaces.

Plasmonic metasurfaces made of perfectly regular 2D lattices of metallic nanoparticles deposited on surfaces or close to waveguides can exhibit hybridized plasmonic and photonic modes. The latter arise from the excitation of surface or guided modes through the in-plane coherent scattering of periodic arrays. Recently, laser-induced self-organization of random plasmonic metasurfaces has been used to create nanoparticle gratings embedded in protective layers.

Predicting Laser-Induced Colors of Random Plasmonic Metasurfaces and Optimizing Image Multiplexing Using Deep Learning.

Structural colors of plasmonic metasurfaces have been promised to a strong technological impact thanks to their high brightness, durability, and dichroic properties. However, fabricating metasurfaces whose spatial distribution must be customized at each implementation and over large areas is still a challenge. Since the demonstration of printed image multiplexing on quasi-random plasmonic metasurfaces, laser processing appears as a promising technology to reach the right level of accuracy and versatility.

Mechanisms driving self-organization phenomena in random plasmonic metasurfaces under multipulse femtosecond laser exposure: a multitime scale study.

Laser-induced transformations of plasmonic metasurfaces pave the way for controlling their anisotropic optical response with a micrometric resolution over large surfaces. Understanding the transient state of matter is crucial to optimize laser processing and reach specific optical properties. This article proposes an experimental and numerical study to follow and explain the diverse irreversible transformations encountered by a random plasmonic metasurface submitted to multiple femtosecond laser pulses at a high repetition rate.

Anti-Counterfeiting White Light Printed Image Multiplexing by Fast Nanosecond Laser Processing.

Passive plasmonic metasurfaces enable image multiplexing by displaying different images when altering the conditions of observation. Under white light, three-image multiplexing with polarization-selective switching has been recently demonstrated using femtosecond-laser-processed random plasmonic metasurfaces. Here, the implementation of image multiplexing is extended, thanks to a color-search algorithm, to various observation modes compatible with naked-eye observation under incoherent white light and to four-image multiplexing under polarized light.

Tailoring metal-dielectric nanocomposite materials with ultrashort laser pulses for dichroic color control.

Metal-dielectric nanocomposites are multiphase material systems containing nanostructures, whose size and arrangement determine the optical properties of the material, enabling the production of new materials with custom-designed response. In this paper, we exploit a femtosecond laser-based strategy to fabricate nanocomposites based on silver nanoparticles (Ag NPs) with tunable optical spectral response. We demonstrate how the spectral response, specifically color and dichroic response, is linked to Ag NPs growth and self-organization processes that are controlled locally by the choice of the laser irradiation parameters, such as scan speed and laser light polarization.

Symmetry Breaking in Oligomer Surface Plasmon Lattice Resonances.

We describe a novel plasmonic-mode engineering, enabled by the structural symmetry of a plasmonic crystal with a metallic oligomer as unit cell. We show how the oligomer symmetry can tailor the scattering directions to spatially overlap with the diffractive orders directions of a plasmonic array. Applied to the color generation field, the presented approach enables the challenging achievement of a broad spectrum of angle-dependent colors since smooth and continuous generation of transmitted vibrant colors, covering both the cyan-magenta-yellow and the red-green-blue color spaces, is demonstrated by scattering angle- and polarization-dependent optical response.

Microstructuring of Mesoporous Titania Films Loaded with Silver Salts to Enhance the Photocatalytic Degradation of Methyl Blue under Visible Light.

The microstructuring of the distribution of silver nanoparticles (NPs) in mesoporous titania films loaded with silver salts, using two-beam interference lithography leading to 1 Dimension (1D) grating, induces variations in the photocatalytic efficiency. The influence of the structuration was tested on the degradation of methyl blue (MB) under ultraviolet (UV) and visible illumination, giving rise to a significant improvement of the photocatalytic efficiency. The periodic distribution of the NPs was characterized by transmission electron microscopy (TEM), high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) and scanning electron microscopy (SEM).

Three-Dimensional Self-Organization in Nanocomposite Layered Systems by Ultrafast Laser Pulses.

Controlling plasmonic systems with nanometer resolution in transparent films and their colors over large nonplanar areas is a key issue for spreading their use in various industrial fields. Using light to direct self-organization mechanisms provides high-speed and flexible processes to meet this challenge. Here, we describe a route for the laser-induced self-organization of metallic nanostructures in 3D.

HAADF-STEM characterization and simulation of nanoparticle distributions in an inhomogeneous matrix.

Measuring with a high accuracy the size distribution of small metallic nanoparticles loaded in a mesoporous metal oxide matrix is of particular interest for many studies related to new generations of interesting metamaterials. Transmission electron microscopy (TEM) is a powerful tool to determine the nature and morphology of very small particles, but their reliable and automatic identification in an inhomogeneous environment where the nanoparticle/background contrast locally varies is not straightforward. Here, we present how a quantitative analysis of high-angle annular dark field scanning TEM (HAADF STEM) images, accounting for the chemical sensitivity of the technique, can improve the accuracy of semiautomatic segmentation methods based on morphological processing to calculate size histograms.

Polarization-driven self-organization of silver nanoparticles in 1D and 2D subwavelength gratings for plasmonic photocatalysis.

One of the main challenges in plasmonics is to conceive large-scale, low-cost techniques suitable for the fabrication of metal nanoparticle patterns showing precise spatial organization. Here, we introduce a simple method based on continuous-wave laser illumination to induce the self-organization of silver nanoparticles within high-index thin films. We show that highly regular and homogeneous nanoparticle gratings can be produced on large areas using laser-controlled self-organization processes.

Spectral and Color Changes of Ag/TiO Photochromic Films Deposited on Diffusing Paper and Transparent Flexible Plastic Substrates.

Giving paper and polymer photochromic properties under laser irradiation is challenging due to the low resistance of these materials to heat, their flexibility, and their possibly irregular structure. However, we could successfully deposit TiO/Ag/TiO layers stacking on flexible white glossy paper and transparent polyethylene terephalate (PET) substrates using a reactive magnetron sputtering technique, and tailor coloration changes after laser irradiation, alternating visible and ultraviolet (UV) wavelengths. The sample colors are characterized by a panel of chromas depending on the irradiation conditions.

Fano-like resonance emerging from magnetic and electric plasmon mode coupling in small arrays of gold particles.

In this work we theoretically and experimentally analyze the resonant behavior of individual 3 × 3 gold particle oligomers illuminated under normal and oblique incidence. While this structure hosts both dipolar and quadrupolar electric and magnetic delocalized modes, only dipolar electric and quadrupolar magnetic modes remain at normal incidence. These modes couple into a strongly asymmetric spectral response typical of a Fano-like resonance.

Laser induced mechanisms controlling the size distribution of metallic nanoparticles.

This paper describes a model to simulate changes in the size distribution of metallic nanoparticles (NPs) in TiO2 films upon continuous wave light excitation. Interrelated laser induced physical and chemical processes initiated directly by photon absorption or by plasmon induced thermal heating are considered. Namely the model takes into account the NP coalescence, Ostwald ripening, the reduction of silver ions and the oxidation of metallic NPs, competitive mechanisms that can lead to counter-intuitive behaviors depending on the exposure conditions.

Growth of single gold nanofilaments at the apex of conductive atomic force microscope tips.

This paper describes a fast and one-step technique to grow single gold filaments at the apex of commercial conductive AFM tips. It is implemented with an atomic force microscope in air with a high relative humidity at room temperature and is based on a bias-assisted electro-reduction of gold ions directly at the tip apex. The technique requires only ad hoc substrates made of a mesoporous silica layer loaded with gold salt deposited on a conductive electrode.

Color calibration of an RGB camera mounted in front of a microscope with strong color distortion.

This paper aims at showing that performing color calibration of an RGB camera can be achieved even in the case where the optical system before the camera introduces strong color distortion. In the present case, the optical system is a microscope containing a halogen lamp, with a nonuniform irradiance on the viewed surface. The calibration method proposed in this work is based on an existing method, but it is preceded by a three-step preprocessing of the RGB images aiming at extracting relevant color information from the strongly distorted images, taking especially into account the nonuniform irradiance map and the perturbing texture due to the surface topology of the standard color calibration charts when observed at micrometric scale.

Influence of reduction processes on the colour and photochromism of amorphous mesoporous TiO(2) thin films loaded with a silver salt.

Silver nanoparticles were created inside mesoporous titania thin films by different reduction processes. We investigated the influence of the reduction method on the colour and photochromism of these amorphous TiO(2) films. The results highlight brown films by optical reduction, gray films by thermal reduction, and red, purple or orange films by chemical reduction.

Electroless growth of silver nanoparticles into mesostructured silica block copolymer films.

Silver nanoparticles and silver nanowires have been grown inside mesostructured silica films obtained from block copolymers using two successive reduction steps: the first one involves a sodium borohydride reduction or a photoreduction of silver nitrate contained in the film, and the second one consists of a silver deposit on the primary nanoparticles, carried out by silver ion solution reduction with hydroxylamine chloride. We have demonstrated that the F127 block copolymer ((PEO)(106)(PPO)(70)(PEO)(106)), "F type", mesostructured silica film is a suitable "soft" template for the fabrication of spherical silver nanoparticles arrays. Silver spheres grow from 7 to 11 nm upon the second reduction step.

Chemical growth and photochromism of silver nanoparticles into a mesoporous titania template.

Elaboration of mesoporous titanium oxide film supporting silver nanoparticles is described. Mesoporous titanium oxide films are characterized by TEM analysis. Titania films are infiltrated with a silver salt solution and chemical reduction treatments are performed using either a NaBH(4) or a formaldehyde solution.

Interferometric measurement of the phase of diffracted waves near the plasmon resonances of metallic gratings.

We propose a method for analyzing both theoretically and experimentally the behavior of the phase of the waves diffracted by gratings. The method is applied to the study of resonance phenomena. It is used for determining the optogeometrical parameters of a metallic grating.

Efficient and tolerant resonant grating coupler for multimode optical interconnections.

More than 60% overall coupling efficiency is achieved in the demonstrator of an optical interconnect comprising an input grating coupler, a multimode slab waveguide section and an output grating coupler. The grating coupling strength is enhanced by means of a leaky mode resonance. The efficiency of the resonant grating coupler compares favourably with the performancs reported on mirror inserts.

Stabilization of a semiconductor disk laser using an intra-cavity high reflectivity grating.

We demonstrate the use of a High Reflectivity Grating (HRG) as an intra-cavity element in a Semiconductor Disk Laser (or Vertical External Cavity Surface Emitting Laser) to stabilise its emission wavelength and polarization characteristics. Operation at 1058nm with up to 645mW of pump-limited output power and an M(2)~1.4 is achieved.

Narrow band resonant grating of 100% reflection under normal incidence.

A resonant grating mirror comprising a multilayer submirror and a grating slab waveguide submirror exhibiting constructive mutual reflection is shown experimentally to provide zero transmission. Its reflection line width of less than 1 nm, its polarization selectivity and low overall loss make the device usable as a longitudinal mode filter in a disk laser in the 1000-1100 nm wavelength range.

99% efficiency measured in the -1st order of a resonant grating.

A resonant diffraction grating comprising a mirror, a dielectric layer and a high index corrugation at the layer-air interface is shown to exhibit off-Littrow the record diffraction efficiency of 99% in the -1st reflected order at 1064 nm wavelength thanks to the excitation of a leaky mode of the layer. Such high figure is obtained by a grating 5 to 10 times shallower than in current attempts to realize high efficiency all-dielectric gratings.