Biomechanical differences of Asian knee osteoarthritis patients during standing and walking using statistical parametric mapping: A cross-sectional study.

Background: Biomechanics of knee osteoarthritis (KOA) patients have been extensively studied using motion capture systems, but less have explored standing knee joint angles with the walking parameters, particularly in Asians. We aim to determine gait biomechanical differences between healthy and KOA participants in an Asian population using One-dimensional Statistical Parametric Mapping (SPM1D) and explore if they are associated with standing joint angles.

Methods: A total of 20 KOA and 24 healthy stood upright and walked 10 m at self-selected speeds.

Proximal cementation of a collarless polished tapered hip stem: biomechanical analysis using a validated finite element model.

Total hip replacement (THR) with cemented stem is a common procedure for patients with hip osteoarthritis. When primary THR fails, removal of the cement is problematic and poses challenges during revision surgeries. The possibility of proximal partial cementing of the hip stem was explored to mitigate the problem.

The biomechanical effects of bimaxillary osteotomies to the patients with mandibular retraction under incisal clenching.

The purpose of this study is to investigate the biomechanical effect of bimaxillary osteotomies on patients with mandibular retraction. Mandibular retraction, as a typical maxillofacial deformity, and has great adverse effects on TMJ. Bimaxillary osteotomies are widely used to correct symptoms of mandibular retraction.

The effects of the size and strength of food on jaw motion and temporomandibular joints.

Mastication displays much importance in people's lives. The masticatory mandibular motion associated with dental kinematics also impacts temporomandibular joint (TMJ) kinematics and even TMJ health status. How food properties impact kinematical parameters of TMJs is a meaningful question for the conservative treatment of temporomandibular disorders (TMD) and evidence for the diet recommendation of TMD patients.

Morphological analysis of the temporomandibular joint in patients with anterior disc displacement.

This study aims to investigate the morphological characteristics of the temporomandibular joint (TMJ) in the patients with anterior disc displacement with reduction (ADDwR) and the alterations after occlusal splint treatment. Thirty ADDwR patients and ten asymptomatic subjects were recruited. Thirteen parameters were adopted, along with automatic computation and presentation of the joint space to characterize the TMJ morphologies.

The influence of maxillary incisor angles on the stress distributions of temporomandibular joints under incisal biting.

Background And Objective: The incisal biting was one of the most regular jaw activities. The direction of bite force on the incisor tip and the mandible position were relevant to the incisor angle as biting. This study was carried out to explore the influence on the temporomandibular joint (TMJ) caused by the incisor angle.

An Improved Finite Element Model of Temporomandibular Joint in Maxillofacial System: Experimental Validation.

Finite element (FE) analysis has become a popular method of exploring the biomechanical characteristics of temporomandibular joint (TMJ). However, the FE model should be improved and its reliability should be verified further. This study developed a complete maxillofacial model by cone-beam computed tomography (CBCT) and magnetic resonance imaging (MRI).

A deep dive into the static force transmission of the human masticatory system and its biomechanical effects on the temporomandibular joint.

Objective: This study aims to investigate the biomechanical behavior and reveal the force transmission patterns of the human masticatory system through advanced three-dimensional finite element (FE) models.

Methods: The FE model was constructed according to the medical images of a healthy male adult. It contains full skull structures, detailed temporomandibular joints (TMJs) with discs, complete dentitions, masticatory muscles, and related ligaments.

Biomechanical comparison of the effect of bilateral sagittal split ramus osteotomy with or without Le Fort I osteotomy on the temporomandibular joints of the patients with maxillofacial deformities under centric occlusion.

Mandibular deformities negatively affect the daily activities of the patients and may cause temporomandibular disorders (TMD). Bilateral sagittal split ramus osteotomy (BSSRO) and Le Fort I osteotomy are effective treatments to correct the mandibular deformities. The aim of this study was to investigate and compare the effects of the BSSRO with or without Le Fort I on the stress distributions of the temporomandibular joints (TMJs) of the patients with mandibular deformities under centric occlusion based on finite element (FE) method.

Descriptions of the dynamic joint space of the temporomandibular joint.

Background: Clinical diagnosis and treatment depended heavily on the motion analysis of the human joints. Although the dynamic joint space (DJS) of other organs was widely used in academic investigations, they were not universally used in the temporomandibular joint (TMJ) field, which was also important for the motion evaluation of the TMJ. The objectives of this study are to introduce the DJS of the TMJ and characterize the DJS regulars of mandibular movements.

The pressure in the temporomandibular joint in the patients with maxillofacial deformities.

Background: Temporomandibular disorder (TMD) symptoms were found to be common in the patients with maxillofacial deformities. The mandibular structure was in relation with the stress within temporomandibular joint (TMJ). However, the current studies on the TMJ stresses in the patients with different maxillofacial deformities are not comprehensive enough.

Changes in the Tibial Strain After Proximal Fibular Osteotomy: A Biomechanical Cadaveric Study.

Total knee arthroplasty surgery is an increasingly common procedure for the treatment of uni- and tricompartmental knee osteoarthritis, particularly in advanced stages and in the older population. Its usage is being extended to younger patients, where implant longevity is of concern. In the younger age group, especially with early disease, other options merit consideration.

Polka dot cementless talar component in enhancing total ankle replacement fixation: A parametric study using the finite element analysis approach.

The primary stability of a total ankle replacement (TAR) is essential in preventing long-term aseptic loosening failure and could be quantified based on micromotion at the bone-prosthesis interface subjected to physiological loading during the normal walking. A 3D finite element analysis was conducted to investigate the current commercial STAR™ Ankle TAR bone-prosthesis interface relative micromotion (BPIRM) with addition of the talus bone minimum principal bone stresses (MPBS). Comparison was made to the proposed polka dot designs with the hemispheric feature that was demonstrated to enhance BPIRM.

Impact of mandibular prognathism on morphology and loadings in temporomandibular joints.

Loadings in temporomandibular joints (TMJs) are essential factors in dysfunction of TMJs, and are barely noticed in treatment of maxillofacial deformity. The only approach, which can access stresses in TMJs, could expend day's even weeks to complete. The objective of the study was to compare the differences of the morphological and biomechanical characteristics of TMJs between asymptomatic subjects and patients with mandibular prognathism, and to preliminarily analyze the connection between the two kinds of characteristics.

Biomechanical behaviour of temporomandibular joints during opening and closing of the mouth: A 3D finite element analysis.

Temporomandibular joints (TMJs) constitute a pair of joints that connect the jawbone to the skull. TMJs are bilateral joints which work as one unit in conducting daily functions such as speaking, mastication, and other activities associated with the movement of the jaw. Issues associated with the TMJs may arise due to various factors-one such factor being the internal load on the TMJ.

Finite element analysis of bone and implant stresses for customized 3D-printed orthopaedic implants in fracture fixation.

3D printing allows product customisation to be cost efficient. This presents opportunity for innovation. This study investigated the effects of two modifications to the locking compression plate (LCP), an established orthopaedic implant used for fracture fixation.

Finite element analysis of bone-prosthesis interface micromotion for cementless talar component fixation through critical loading conditions.

The total ankle replacement (TAR) survivability rate is still suboptimal, and this leads to many orthopaedic surgeons opting arthrodesis as a better option for the ankle arthritis patients. One of the fundamental reasons is due to the lack of primary stability of the prosthesis fixation at the bone-prosthesis interface hence leading to long-term aseptic loosening of the talar component. The commercially available Scandinavian Total Ankle Replacement (STAR) Ankle design and several additional design features (including trabecular metal, side fin, double fin, and polka-dot designs) were studied using finite element analysis, and the bone-prosthesis interface relative micromotion (BPIRM) and talar bone minimum principal stresses were examined and analysed.

Effects on loads in temporomandibular joints for patients with mandibular asymmetry before and after orthognathic surgeries under the unilateral molar clenching.

Orthognathic surgery is a useful treatment for the correction of mandibular deformity. Different from other occlusions, unilateral occlusion is frequently used in mastication and influences functions of temporomandibular joints (TMJs). However, stress distributions in TMJ before and after orthognathic surgeries are not under consideration in treatments, crucial to pre- and postoperative temporomandibular disorders (TMDs).

Biomechanical analysis of proximal tibia bone grafting and the effect of the size of osteotomy using a validated finite element model.

Harvesting bone graft from the proximal tibia is gaining popularity, with lower complication rates and adequate quantity of cancellous bone. The amount of harvested bone is dependent on the size of the cortical window introduced via osteotomy onto the proximal tibia, and its mechanical strength after surgery could be compromised. The aim of the study was to investigate the proximal tibia's mechanical stability after bone harvesting and the effect of varying window sizes using a validated finite element model.

The influence of bilateral sagittal split ramus osteotomy on the stress distributions in the temporomandibular joints of the patients with facial asymmetry under symmetric occlusions.

The aim of this study is to compare the differences in the stress distributions in the temporomandibular joints (TMJs) of the patients with facial asymmetry before and after bilateral sagittal split ramus osteotomy (BSSRO) under the symmetric occlusions using the three-dimensional (3D) finite element method.Ten facial asymmetry patients (Preoperative group, age 24.6 ± 4.

A double button adjustable loop device is biomechanically equivalent to tension band wire in the fixation of transverse patellar fractures-A cadaveric study.

Introduction: Tension-band wire fixation of patellar fractures is associated with significant hardware-related complications and infection. Braided polyester suture fixation is an alternative option. However, these suture fixations have higher failure rates due to the difficulty in achieving rigid suture knot fixation.

A biomechanical study of proximal tibia bone grafting through the lateral approach.

Background: Autologous bone graft remains the gold standard source of bone graft. Iliac crest has traditionally been the most popular source for autologous bone graft. However, iliac crest bone graft harvesting is associated with high donor site morbidity.

Medial longitudinal arch biomechanics evaluation during gait in subjects with flexible flatfoot.

Purpose: Medial longitudinal arch (MLA) strengthening has been considered an important part of successful flatfoot treatment. But, to date, the biomechanical loading behavior of the medial arch in flatfoot has not been evaluated. This study aimed to evaluate the MLA moment, MLA deformation angle, foot kinematics and ground reaction forces (GRF) in both normal foot and flatfoot groups.