Morphological characterization using scanning electron microscopy of fly artifacts deposited by Calliphora vomitoria (Diptera: Calliphoridae) on household materials.

Insects found at a crime scene can produce traces referred to as fly artifacts (FA) due to their movement over the corpse and the manner in which they feed upon it. These can be detrimental for carrying out criminal investigations. Confusing a FA with a genuine bloodspot can lead to misinterpretations, also taking into consideration that FA may contain a human DNA profile.

Scanning electron microscopy in the identification of fly artifacts.

Bloodstain pattern analysis has a key role in crime scene reconstruction; however, it can be hampered by diverse confounding factors, such as insect activity which may lead to the production of small artifactual bloodstains, commonly referred to as fly artifacts (FA). Although several techniques aimed at distinguishing human bloodstains and FA have been developed, actually, no standardized and reproducible methodology is available. The aim of our study was to test the use of scanning electron microscopy (SEM) to distinguish human bloodstains from FA produced by Sarcophaga carnaria.

Visualizing the Supramolecular Assembly of Collagen.

Among biological macromolecules, collagen enjoys quite a peculiar status. Making up as much as a third of the protein fraction of the body it is the main responsible for the functional properties of the extracellular matrix, which can be efficiently tuned and tailored by modifying the length, volume fraction, and spatial layout of its collagen content. The supramolecular aggregates of collagen are therefore subject to be investigation by several viewpoints and at different scales, from the finest interactions of individual collagen molecules to the spatial layout of fibril bundles.

Osteoclast differentiation from human blood precursors on biomimetic calcium-phosphate substrates.

Unlabelled: The design of synthetic bone grafts to foster bone formation is a challenge in regenerative medicine. Understanding the interaction of bone substitutes with osteoclasts is essential, since osteoclasts not only drive a timely resorption of the biomaterial, but also trigger osteoblast activity. In this study, the adhesion and differentiation of human blood-derived osteoclast precursors (OCP) on two different micro-nanostructured biomimetic hydroxyapatite materials consisting in coarse (HA-C) and fine HA (HA-F) crystals, in comparison with sintered stoichiometric HA (sin-HA, reference material), were investigated.

Differential proteomic and phenotypic behaviour of papillary and anaplastic thyroid cell lines.

Thyroid carcinomas account for a minority of all malignant tumours but, after those of the gonads, they represent the most common forms of endocrine cancers. They include several types, among which the papillary thyroid cancer (PTC) and the anaplastic thyroid cancer (ATC) are the best known. The two hystotypes display significant biological and clinical differences: PTC is a well differentiated form of tumour with a high incidence and a good prognosis, while the ATC is less frequent but represents one of the most aggressive endocrine tumours with morphological features of an undifferentiated type.

Early healing events around titanium implant devices with different surface microtopography: a pilot study in an in vivo rabbit model.

In the present pilot study, the authors morphologically investigated sandblasted, acid-etched surfaces (SLA) at very early experimental times. The tested devices were titanium plate-like implants with flattened wide lateral sides and jagged narrow sides. Because of these implant shape and placement site, the device gained a firm mechanical stability but the largest portion of the implant surface lacked direct contact with host bone and faced a wide peri-implant space rich in marrow tissue, intentionally created in order to study the interfacial interaction between metal surface and biological microenvironment.

Enhancing osteoconduction of PLLA-based nanocomposite scaffolds for bone regeneration using different biomimetic signals to MSCs.

In bone engineering, the adhesion, proliferation and differentiation of mesenchymal stromal cells rely on signaling from chemico-physical structure of the substrate, therefore prompting the design of mimetic "extracellular matrix"-like scaffolds. In this study, three-dimensional porous poly-L-lactic acid (PLLA)-based scaffolds have been mixed with different components, including single walled carbon nanotubes (CNT), micro-hydroxyapatite particles (HA), and BMP2, and treated with plasma (PT), to obtain four different nanocomposites: PLLA + CNT, PLLA + CNTHA, PLLA + CNT + HA + BMP2 and PLLA + CNT + HA + PT. Adult bone marrow mesenchymal stromal cells (MSCs) were derived from the femur of orthopaedic patients, seeded on the scaffolds and cultured under osteogenic induction up to differentiation and mineralization.

Evidence of a discrete axial structure in unimodal collagen fibrils.

The collagen fibrils of cornea, blood vessel walls, skin, gut, interstitial tissues, the sheath of tendons and nerves, and other connective tissues are known to be made of helically wound subfibrils winding at a constant angle to the fibril axis. A critical aspect of this model is that it requires the axial microfibrils to warp in an implausible way. This architecture lends itself quite naturally to an epitaxial layout where collagen microfibrils envelop a central core of a different nature.

Correlative microscopy of bone in implant osteointegration studies.

Routine morphological analyses usually include investigations by light microscopy (LM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Each of these techniques provides specific information on tissue morphology and all the obtained results are then combined to give an in-depth morphological overview of the examined sample. The limitations of this traditional comparative microscopy lie in the fact that each technique requires a different experimental sample, so that many specimens are necessary and the combined results come from different samples.

Contribution of glycosaminoglycans to the microstructural integrity of fibrillar and fiber crimps in tendons and ligaments.

The biomechanical roles of both tendons and ligaments are fulfilled by the extracellular matrix of these tissues. In particular, tension is mainly transmitted and resisted by protein (collagen, elastin) fibers, whereas compression is opposed by water-soluble glycosaminoglycans (GAGs). GAGs spanning the interfibrillar spaces and interacting with fibrils through the interfibrillar proteoglycans also seem to play a part in transmitting and resisting tensile stresses.

Influence of a zirconia sandblasting treated surface on peri-implant bone healing: An experimental study in sheep.

A sandblasting process with round zirconia (ZrO(2)) particles might be an alternative surface treatment to enhance the osseointegration of titanium dental implants. Our previous study on sheep compared smooth surface titanium implants (control) with implant surfaces sandblasted with two different granulations of ZrO(2). As the sandblasted surfaces proved superior, the present study further compared the ZrO(2) surface implant with other surface treatments currently employed: machined titanium (control), titanium oxide plasma sprayed (TPS) and alumina sandblasted (Al-SL) at different times after insertion (2, 4 and 12weeks).

Histological and ultrastructural evaluation of Leeds-Keio ligament 20 years after implant: a case report.

We were capable of undertaking a histological and ultrastructural evaluation of an intact Leeds-Keio ligament implanted 20 years ago to assess the neoligamentization process inside this artificial ligament. The histological evaluation disclosed a collagen fibrils orientation very close to the structure of a normal anterior cruciate ligament (ACL) where the collagen fibres are multidirectional [Strocchi et al. in J Anat 180(3):515-519, 1992].

Displayed correlation between gene expression profiles and submicroscopic alterations in response to cetuximab, gefitinib and EGF in human colon cancer cell lines.

Background: EGFR is frequently overexpressed in colon cancer. We characterized HT-29 and Caco-2, human colon cancer cell lines, untreated and treated with cetuximab or gefitinib alone and in combination with EGF.

Methods: Cell growth was determined using a variation on the MTT assay.

Polylactic acid fibre-reinforced polycaprolactone scaffolds for bone tissue engineering.

The employment of composite scaffolds with a well-organized architecture and multi-scale porosity certainly represents a valuable approach for achieving a tissue engineered construct to reproduce the middle and long-term behaviour of hierarchically complex tissues such as spongy bone. In this paper, fibre-reinforced composites scaffold for bone tissue engineering applications is described. These are composed of poly-L-lactide acid (PLLA) fibres embedded in a porous poly(epsilon-caprolactone) matrix, and were obtained by synergistic use of phase inversion/particulate leaching technique and filament winding technology.

The role of hydroxyapatite as solid signal on performance of PCL porous scaffolds for bone tissue regeneration.

Highly porous composites made up of biodegradable poly-epsilon-caprolactone (PCL) and stoichiometric hydroxyapatite (HA) particles have been developed as substrate for bone-tissue regeneration. The processing technique consists of phase inversion and particulate (salt crystals) leaching. Three different HA contents (13, 20 and 26 vol %) in PCL-based composite were considered in this study.

Decorin transfection induces proteomic and phenotypic modulation in breast cancer cells 8701-BC.

Decorin is a prototype member of the small leucine-rich proteoglycan family widely distributed in the extracellular matrices of many connective tissues, where it has been shown to play multiple important roles in the matrix assembly process, as well as in some cellular activities. A major interest for decorin function concerns its role in tumorigenesis, as growth-inhibitor of different neoplastic cells, and potential antimetastatic agent. The aim of our research was to investigate wide-ranged effects of transgenic decorin on breast cancer cells.

Influence of different implant surfaces on peri-implant osteogenesis: histomorphometric analysis in sheep.

Background: The present study investigated peri-implant osteogenesis and implant biologic fixation in different zirconia sandblasted endosseous titanium surfaces (SLA-60 and SLA-120) and a turned titanium surface (T) 2 and 4 weeks after surgery.

Methods: Seventy-two implant screws were implanted in tibia of six sheep. Histologic sections of implants (2 and 4 weeks after surgery) were analyzed with light microscopy for histomorphometric analysis of bone-to-implant contact (BIC), bone ingrowth (BI), and bone surface (BS/BV).

Comparison of human mandibular osteoblasts grown on two commercially available titanium implant surfaces.

Background: Surface characteristics play a major role in determining tissue response to implants and therefore their clinical outcome. The aim of the present study was to compare two commercially available titanium surfaces: plasma sprayed (TPS) and sand-blasted, acid-etched surface (SLA).

Methods: The surfaces were characterized by roughness testing, scanning electronic microscopy (SEM), Raman spectroscopy, and protein adsorption to determine their microtopographic and chemical properties.

Osteogenesis and morphology of the peri-implant bone facing dental implants.

This study investigated the influence of different implant surfaces on peri-implant osteogenesis and implant face morphology of peri-implant tissues during the early (2 weeks) and complete healing period (3 months). Thirty endosseous titanium implants (conic screws) with differently treated surfaces (smooth titanium = SS, titanium plasma sprayed = TPS, sand-blasted zirconium oxide = Zr-SLA) were implanted in femur and tibiae diaphyses of two mongrel sheep. Histological sections of the implants and surrounding tissues obtained by sawing and grinding techniques were observed under light microscopy (LM).

Different titanium surface treatment influences human mandibular osteoblast response.

Background: Six titanium disks with six different surface treatments were examined: SS: smooth (polished) surface; TPS: plasma spray; C100: sand blasting by aluminum oxide (Al2O3) diameter 100 microm and acid etching; C150: sand blasting by Al2O3 diameter 150 microm and acid etching; B60: sand blasting by zirconium oxide (ZrO2) diameter 60 microm and acid etching; and B120: sand blasting by ZrO2 diameter 120 microm and acid etching.

Methods: The surface characteristics were determined by scanning electron microscopy (SEM) observation and a roughness tester. Raman spectroscopy was used to determine the presence of residual substances on the samples.

Polydeoxyribonucleotide (PDRN) promotes human osteoblast proliferation: a new proposal for bone tissue repair.

Several researchers have recently shed new light upon the importance of extracellular nucleotides and nucleosides to stimulate cells growth. PDRN, a mixture of deoxyribonucleotides polymers of different lengths, has recently demonstrated to stimulate "in vitro" fibroblast proliferation and collagen production, probably stimulating the purinergic receptor system. In this work we evaluated the effects of PDRN on human cultured osteoblasts, focusing our attention on cell proliferation and alkaline phosphatase activity.