Successful removal of fluoride from aqueous environment using Al(OH)@AC: column studies and breakthrough curve modeling.

In this study, we discuss the removal of fluoride from water through column adsorption methods using Al(OH)@AC as a functional granular activated carbon. The height of the bed, fluoride concentration, and flow rate are the experimental factors used to obtain the breakthrough curves. As the flow rate increased, the breakthrough and saturation times decreased.

Herbs carbonization and activation for fast sorption of nitrate ions: a new challenge for a full treatment of groundwater pollution.

The evolution of low-cost ecotechnologies in water treatment and purification is highly increased. Face to the growing global demand for eco-friendly water treatment materials, the non-valorized herb-based biomass covering a large area could be a promising alternative. Herbs (HB) are currently one of the cheapest biomasses.

An Electrolyte-Gated Graphene Field-Effect Transistor for Detection of Gadolinium(III) in Aqueous Media.

In this work, an electrolyte-gated graphene field-effect transistor is developed for Gd ion detection in water. The source and drain electrodes of the transistor are fabricated by photolithography on polyimide, while the graphene channel is obtained by inkjet-printing a graphene oxide ink subsequently electro-reduced to give reduced graphene oxide. The Gd-selective ligand DOTA is functionalized by an alkyne linker to be grafted by click chemistry on a gold electrode without losing its affinity for Gd.

Advances in Amine-Surface Functionalization of Inorganic Adsorbents for Water Treatment and Antimicrobial Activities: A Review.

In the last decade, adsorption has exhibited promising and effective outcomes as a treatment technique for wastewater contaminated with many types of pollutants such as heavy metals, dyes, pharmaceuticals, and bacteria. To achieve such effectiveness, a number of potential adsorbents have been synthesized and applied for water remediation and antimicrobial activities. Among these inorganic adsorbents (INAD), activated carbon, silica, metal oxide, metal nanoparticles, metal-organic fibers, and graphene oxide have been evaluated.

Phytoremediation of PCB: contaminated Algerian soils using native agronomics plants.

Pot cultivation experiments were conducted to assess the phytoremediation potential of two local agronomic plants, namely Avena sativa and Vicia sativa. Several soils with long-standing contamination and different levels of Polychlorinated biphenyl (PCB) contamination were used for this study. The soil samples came from different regions of Algeria and had different physico-chemical parameters.

Surface modification of biomaterials based on cocoa shell with improved nitrate and Cr(vi) removal.

The present work addresses the development of simple, low-cost and eco-friendly cocoa-shell-based materials for efficient removal of heavy metal hexavalent chromium (Cr(vi)), and toxic nitrate (NO ) from aqueous solution. A conventional treatment process was used to purify cocoa shell (CS) into an adsorbent, followed by chemical grafting of dendrimers to promote its surface properties for nitrate and Cr(vi) removal. The morphology, surface charge, structure and stability of the new adsorbent were investigated by scanning electron microscopy, Fourier transform infrared and UV-visible spectroscopies, zeta potential, X-ray photoelectron spectrometry, and differential scanning calorimetry.

Modification of fibrous membrane for organic and pathogenic contaminants removal: from design to application.

In this study, a flexible multifunctional fibrous membrane for heterogeneous Fenton-like removal of organic and pathogenic contaminants from wastewater was developed by immobilizing zerovalent iron nanoparticles (Fe-NPs) on an amine/thiol grafted polyester membrane. Full characterization of the resulting polyester membranes allowed validation of successful grafting of amine/thiol (NH or SH) functional groups and immobilization of Fe-NPs (50-150 nm). The Fenton-like functionality of iron immobilized fibrous membranes (PET-Fe, PET-Si-NH-Fe, PET-NH-Fe, and PET-SH-Fe) in the presence of hydrogen peroxide (HO) was comparatively studied in the removal of crystal violet dye (50 mg L).

Heterogeneous-phase Sonogashira cross-coupling reaction on COC surface for the grafting of biomolecules - Application to isatin.

The grafting of 5-iodoisatin heterocycle on a cyclic olefin copolymer (COC) and a gold surface was performed using a heterogeneous phase Sonogashira reaction consisting of coupling 5-iodoisatin with an arylalkyne previously introduced onto the surfaces. This optimized strategy takes advantage of the well-established methodology to functionalize COC or gold surfaces using aryldiazonium surface chemistry. Herein, we reported the first example of an isatin decorated polymeric or metallic surface.

Silver nanoparticle embedded copper oxide as an efficient core-shell for the catalytic reduction of 4-nitrophenol and antibacterial activity improvement.

A facile and eco-friendly method was developed to prepare a microporous CuO@Ag0 core-shell with high catalytic and antibacterial activities. Scanning and transmission electron microscopy revealed a preponderance of nearly spherical 50 nm particles with slight structure compaction. Comparison of the hysteresis loops confirmed the structure compaction after AgNP incorporation, and a significant decrease of the specific surface area from 55.

Influence of a mixture of metals on PAHs biodegradation processes in soils.

In order to assess the effect of mixed pollutants, the influence of different concentration levels of a mixture of metals (Cr, Co, Pb, Mn, Ni, Cu, Zn) on the biodegradation of some PAHs (phenanthrene, fluoranthene, pyrene, benzo[b]fluoranthene and benzo[a]pyrene) in soil samples was evaluated. To do so, groups of microcosms of a natural soil from the region of Sabadell (Barcelona, Spain) were prepared as a reproduction of the native environment at laboratory scale, under controlled conditions. Mixtures of PAHs and metals were carefully selected, according to soil characterization and microbiological growth preliminary assays, and were added to microcosms.

Development of a novel functional core-shell-shell nanoparticles: From design to anti-bacterial applications.

This article reports the synthesis and functionalization of a novel CuO@SiO-APTES@Ag core-shell-shell material using a simple and low-cost process. The growth, design strategies and synthesis approach are the key factors for the development of CuO@SiO-APTES@Ag as efficient material with enhanced antibacterial activity. We investigated the morphology, surface charge, structure and stability of our new core-shell-shell by atomic force microscopy, scanning electron microscopy, energy dispersive X-ray, Fourier transform infrared and UV-visible spectroscopies, zeta potential measurements, and differential scanning calorimetry.

Low effect of phenanthrene bioaccessibility on its biodegradation in diffusely contaminated soil.

This study focused on the role of bioaccessibility in the phenanthrene (PHE) biodegradation in diffusely contaminated soil, by combining chemical and microbiological approaches. First, we determined PHE dissipation rates and PHE sorption/desorption isotherms for two soils (PPY and Pv) presenting similar chronic PAH contamination, but different physico-chemical properties. Our results revealed that the PHE dissipation rate was significantly higher in the Pv soil compared to the PPY soil, while PHE sorption/desorption isotherms were similar.

Chemical modification of the cocoa shell surface using diazonium salts.

The outer portion of the cocoa bean, also known as cocoa husk or cocoa shell (CS), is an agrowaste material from the cocoa industry. Even though raw CS is used as food additive, garden mulch, and soil conditioner or even burnt for fuel, this biomass material has hardly ever been investigated for further modification. This article proposes a strategy of chemical modification of cocoa shell to add value to this natural material.

Influence of the vegetative cover on the fate of trace metals in retention systems simulating roadside infiltration swales.

Large-scale outdoor mesocosms were designed and co-contaminated with metals (Cd, Pb, Zn) and organic compounds to better understand the complex functioning of urban roadside swale environments. Infiltration systems were planted with macrophytes (P. arundinaceae, J.

Synthesis and properties of ZnO-HMD@ZnO-Fe/Cu core-shell as advanced material for hydrogen storage.

In this paper, a new synthetic strategy towards functionalized ZnO-HMD@ZnO-Fe/Cu core-shell using sol-gel process modified by chemical grafting of hexamethylenediamine (HMD) on the core and in-situ dispersion of Cu/Fe as metallic nanoparticles (M-NPs) on the shell. The as-prepared core-shell materials were fully characterized by transmission electron microscopy, X-ray powder diffractometry, diffuse reflectance and FT-IR spectrophotometery, photoluminescence, and complexes impedance spectroscopy measurements. The XRD patterns agreed with that of the ZnO typical wurtzite structure, indicating good crystallinity of ZnO-HMD@ZnO-Fe/Cu, with the presence of Fe and Cu phases.

Alternative techniques to HPCD to evaluate the bioaccessible fraction of soil-associated PAHs and correlation to biodegradation efficiency.

The total amount of polycyclic aromatic hydrocarbons (PAHs) in soils, given by exhaustive chemical extractions, does not relate directly to environmental risk, since only a fraction may be accessible to soil organisms. The rapid PAH desorbing fraction (Frap), which is weakly and reversibly sorbed to soils, is called the bioaccessible fraction, and can be estimated by non-exhaustive aqueous extractions. In order to better estimate Frap, different mild-extractants were tested, such as various cyclodextrins, surfactants and butanol.

Atmospheric Solid Analysis Probe-Ion Mobility Mass Spectrometry: An Original Approach to Characterize Grafting on Cyclic Olefin Copolymer Surfaces.

A cyclic olefin copolymer (COC) was grafted with aryl layers from aryldiazonium salts, and then we combined infrared spectrometry, atomic force microscopy (AFM), and ion mobility mass spectrometry with atmospheric solid analysis probe ionization (ASAP-IM-MS) to characterize the aryl layers. ASAP is a recent atmospheric ionization method dedicated to the direct analysis of solid samples. We demonstrated that ASAP-IM-MS is complementary to other techniques for characterizing bromine and sulfur derivatives of COC on surfaces.

Assessment of PAH dissipation processes in large-scale outdoor mesocosms simulating vegetated road-side swales.

Biofilters have been implemented in urban areas due to their ability to improve road runoff quality. However, little is known about the role of soil microorganisms and plants on pollutant remediation in planted swales. Therefore, four large-scale outdoor mesocosms were built and co-contaminated with metals and model polycyclic aromatic hydrocarbons (PAHs) (phenanthrene (Phen), pyrene (Pyr) and benzo[a]pyrene (BaP)), to better understand the complex functioning of swale-like environments.

Application of biosurfactants and periodic voltage gradient for enhanced electrokinetic remediation of metals and PAHs in dredged marine sediments.

Dredged harbor sediment co-contaminated by heavy metals and polycyclic aromatic hydrocarbons (PAHs) was subjected to enhanced electrokinetic treatments, using a mixture of a chelating agent (citric acid CA) and a surfactant as additives in the processing fluids. We tested various operating conditions (at 1 V cm(-1)): different CA concentrations, applying a periodic voltage gradient, pre-conditioning the sediment with the additives, and replacing the synthetic surfactant Tween 20 (TW20) by biosurfactants. Increasing the CA concentration was favorable for both metal and PAH removal.

Correlations between PAH bioavailability, degrading bacteria, and soil characteristics during PAH biodegradation in five diffusely contaminated dissimilar soils.

The natural biodegradation of seven polycyclic aromatic hydrocarbons (PAHs) by native microorganisms was studied in five soils from Normandy (France) from diffusely polluted areas, which can also pose a problem in terms of surfaces and amounts of contaminated soils. Bioavailability tests using cyclodextrin-based extractions were performed. The natural degradation of low molecular weight (LMW) PAHs was not strongly correlated to their bioavailability due to their sorption to geosorbents.

Investigation of the release of PAHs from artificially contaminated sediments using cyclolipopeptidic biosurfactants.

Polycyclic aromatic hydrocarbons (PAHs) can be preponderant in contaminated sediments and understanding how they are sorbed in the different mineral and organic fractions of the sediment is critical for effective removal strategies. For this purpose, a mixture of seven PAHs was studied at the sediment/water interface and sorption isotherms were obtained. The influence of various factors on the sorption behavior of PAHs was evaluated, such as the nature of minerals, pH, ionic strength and amount of organic matter.

Gamma-aminobutyric acid acts as a specific virulence regulator in Pseudomonas aeruginosa.

Gamma-aminobutyric acid (GABA) is widespread in the environment and can be used by animal and plants as a communication molecule. Pseudomonas species, in particular fluorescent ones, synthesize GABA and express GABA-binding proteins. In this study, we investigated the effects of GABA on the virulence of Pseudomonas aeruginosa.

Quantification of Pseudomonas aeruginosa hydrogen cyanide production by a polarographic approach.

Pseudomonas aeruginosa is an opportunistic pathogen responsible for numerous infections acquired in hospital especially in persons whose immune systems are weakened, such as with patient suffering from AIDS or cystic fibrosis. This bacterium produces a great diversity of virulence factors among them hydrogen cyanide (HCN) which is one of the most potent and toxic. A precise quantification of HCN or CN(-) ion is essential to understand the involvement of this toxin in the pathogenesis of P.

Novel application of cyclolipopeptide amphisin: feasibility study as additive to remediate polycyclic aromatic hydrocarbon (PAH) contaminated sediments.

To decontaminate dredged harbor sediments by bioremediation or electromigration processes, adding biosurfactants could enhance the bioavailability or mobility of contaminants in an aqueous phase. Pure amphisin from Pseudomonas fluorescens DSS73 displays increased effectiveness in releasing polycyclic aromatic hydrocarbons (PAHs) strongly adsorbed to sediments when compared to a synthetic anionic surfactant. Amphisin production by the bacteria in the natural environment was also considered.