Tuning a bioengineered hydrogel for studying astrocyte reactivity in glioblastoma.

Astrocytes play many essential roles in the central nervous system (CNS) and are altered significantly in disease. These reactive astrocytes contribute to neuroinflammation and disease progression in many pathologies, including glioblastoma (GB), an aggressive form of brain cancer. Current in vitro platforms do not allow for accurate modeling of reactive astrocytes.

Lens epithelial cell response to polymer stiffness and polymer chemistry.

Posterior capsule opacification (PCO) is the most common complication of cataract surgery, and intraocular lens (IOL) implantation is the standard of care for cataract patients. Induction of post-operative epithelial-mesenchymal transition (EMT) in residual lens epithelial cells (LEC) is the main mechanism by which PCO forms. Previous studies have shown that IOLs made with different materials have varying incidence of PCO.

Light-induced Extracellular Vesicle Adsorption.

The role of extracellular vesicles (EVs) in human health and disease has garnered considerable attention over the past two decades. However, while several types of EVs are known to interact dynamically with the extracellular matrix and there is great potential value in producing high-fidelity EV micropatterns, there are currently no label-free, high-resolution, and tunable platform technologies with this capability. We introduce Light-induced Extracellular Vesicle Adsorption (LEVA) as a powerful solution to rapidly advance the study of matrix- and surface-bound EVs and other particles.

Up-regulation of the Cdc42 GTPase limits the replicative life span of budding yeast.

Cdc42, a conserved Rho GTPase, plays a central role in polarity establishment in yeast and animals. Cell polarity is critical for asymmetric cell division, and asymmetric cell division underlies replicative aging of budding yeast. Yet how Cdc42 and other polarity factors impact life span is largely unknown.

Micropatterned growth surface topography affects extracellular vesicle production.

Extracellular vesicles (EVs) are micro and nanoscale packages that circulate in all bodily fluids and play an important role in intercellular communication by shuttling biomolecules to nearby and distant cells. However, producing sufficient amounts of EVs for many types of in vitro studies using standard culture methods can be challenging, and despite the success of some bioreactors in increasing EV-production, it is still largely unknown how individual culture conditions can alter the production and content of EVs. In this study, we demonstrate a simple and inexpensive micropatterning technique that can be used to produce polystyrene microtracks over a 100 mm diameter growth surface area.

A Microfluidic Chip Enables Isolation of Exosomes and Establishment of Their Protein Profiles and Associated Signaling Pathways in Ovarian Cancer.

Because of limits on specificity and purity to allow for in-depth protein profiling, a standardized method for exosome isolation has yet to be established. In this study, we describe a novel, in-house microfluidic-based device to isolate exosomes from culture media and patient samples. This technology overcomes contamination issues because sample separation is based on the expression of highly specific surface markers CD63 and EpCAM.

Microfluidic affinity separation chip for selective capture and release of label-free ovarian cancer exosomes.

Exosomes are nanoscale vesicles found in many bodily fluids which play a significant role in cell-to-cell signaling and contain biomolecules indicative of their cells of origin. Recently, microfluidic devices have provided the ability to efficiently capture exosomes based on specific membrane biomarkers, but releasing the captured exosomes intact and label-free for downstream characterization and experimentation remains a challenge. We present a herringbone-grooved microfluidic device which is covalently functionalized with antibodies against general and cancer exosome membrane biomarkers (CD9 and EpCAM) to isolate exosomes from small volumes of high-grade serous ovarian cancer (HGSOC) serum.

Quantum confined peptide assemblies with tunable visible to near-infrared spectral range.

Quantum confined materials have been extensively studied for photoluminescent applications. Due to intrinsic limitations of low biocompatibility and challenging modulation, the utilization of conventional inorganic quantum confined photoluminescent materials in bio-imaging and bio-machine interface faces critical restrictions. Here, we present aromatic cyclo-dipeptides that dimerize into quantum dots, which serve as building blocks to further self-assemble into quantum confined supramolecular structures with diverse morphologies and photoluminescence properties.

Soft Lithography and Minimally Human Invasive Technique for Rapid Screening of Oral Biofilm Formation on New Microfabricated Dental Material Surfaces.

Introduction: Microfabrication offers opportunities to study surface concepts focused to reduce bacterial adhesion on implants using human minimally invasive rapid screening (hMIRS). Wide information is available about cell/biomaterial interactions using eukaryotic and prokaryotic cells on surfaces of dental materials with different topographies, but studies using human being are still limited.

Objective: To evaluate a synergy of microfabrication and hMIRS to study the bacterial adhesion on micropatterned surfaces for dental materials.

On-Chip Clonal Analysis of Glioma-Stem-Cell Motility and Therapy Resistance.

Enhanced glioma-stem-cell (GSC) motility and therapy resistance are considered to play key roles in tumor cell dissemination and recurrence. As such, a better understanding of the mechanisms by which these cells disseminate and withstand therapy could lead to more efficacious treatments. Here, we introduce a novel micro-/nanotechnology-enabled chip platform for performing live-cell interrogation of patient-derived GSCs with single-clone resolution.

Effects of Line and Pillar Array Microengineered SiO2 Thin Films on the Osteogenic Differentiation of Human Bone Marrow-Derived Mesenchymal Stem Cells.

A primary goal in bone tissue engineering is the design of implants that induce controlled, guided, and rapid healing. The events that normally lead to the integration of an implant into bone and determine the performance of the device occur mainly at the tissue-implant interface. Topographical surface modification of a biomaterial might be an efficient tool for inducing stem cell osteogenic differentiation and replace the use of biochemical stimuli.

Influence of airway wall compliance on epithelial cell injury and adhesion during interfacial flows.

Interfacial flows during cyclic airway reopening are an important source of ventilator-induced lung injury. However, it is not known how changes in airway wall compliance influence cell injury during airway reopening. We used an in vitro model of airway reopening in a compliant microchannel to investigate how airway wall stiffness influences epithelial cell injury.

Modulation of human dermal microvascular endothelial cell and human gingival fibroblast behavior by micropatterned silica coating surfaces for zirconia dental implant applications.

Dental ceramic implants have shown superior esthetic behavior and the absence of induced allergic disorders when compared to titanium implants. Zirconia may become a potential candidate to be used as an alternative to titanium dental implants if surface modifications are introduced. In this work, bioactive micropatterned silica coatings were produced on zirconia substrates, using a combined methodology of sol-gel processing and soft lithography.

Sulfonated polyaniline-based organic electrodes for controlled electrical stimulation of human osteosarcoma cells.

Electrically conducting polymers (CPs) were found to stimulate various cell types such as neurons, osteoblasts, and fibroblasts in both in vitro and in vivo studies. However, to our knowledge, no studies have been reported on the utility of CPs in stimulation of cancer or tumor cells in the literature. Here we report a facile fabrication method of self-doped sulfonated polyaniline (SPAN)-based interdigitated electrodes (IDEs) for controlled electrical stimulation of human osteosarcoma (HOS) cells.

Effects of density of anisotropic microstamped silica thin films on guided bone tissue regeneration--in vitro study.

The growing demand for better implant aesthetics has led to increased research on the development of all-ceramic dental implants. The use of microtextured coatings with enhanced properties has been presented as a viable way to improve tissue integrability of all-ceramic implants. The aim of this study was to evaluate the effects of different densities of anisotropic microtextured silica thin films, which served as a model coating, on the behavior of human osteoblast-like cells.

Gene delivery to cultured embryonic stem cells using nanofiber-based sandwich electroporation.

Multiple gene transfections are often required to control the differentiation of embryonic stem cells. This is typically done by removing the cells from the culture substrate and conducting gene transfection via bulk electroporation (in suspension), which is then followed by further culture. Such repetitive processes could affect the growth and behavior of delicate/scarce adherent cells.

Microfabricated mimics of in vivo structural cues for the study of guided tumor cell migration.

Guided cell migration plays a crucial role in tumor metastasis, which is considered to be the major cause of death in cancer patients. Such behavior is regulated in part by micro/nanoscale topographical cues present in the parenchyma or stroma in the form of fiber-like and/or conduit-like structures (e.g.

Micro/nanoscale technologies for the development of hormone-expressing islet-like cell clusters.

Insulin-expressing islet-like cell clusters derived from precursor cells have significant potential in the treatment of type-I diabetes. Given that cluster size and uniformity are known to influence islet cell behavior, the ability to effectively control these parameters could find applications in the development of anti-diabetic therapies. In this work, we combined micro and nanofabrication techniques to build a biodegradable platform capable of supporting the formation of islet-like structures from pancreatic precursors.

Reinforced Portland cement porous scaffolds for load-bearing bone tissue engineering applications.

Modified Portland cement porous scaffolds with suitable characteristics for load-bearing bone tissue engineering applications were manufactured by combining the particulate leaching and foaming methods. Non-crosslinked polydimethylsiloxane was evaluated as a potential reinforcing material. The scaffolds presented average porosities between 70 and 80% with mean pore sizes ranging from 300 μm up to 5.

Portland cement for bone tissue engineering: Effects of processing and metakaolin blends.

The need for a suitable scaffolding material for load bearing bone tissue engineering still has yet to be met satisfactorily. In this study, Portland cement and Portland cement/metakaolin (MK) blends were processed to render them biologically and mechanically suitable for such application. Portland cement was mixed with MK at different ratios.

Synthesis and characterization of cytocompatible sulfonated polyanilines.

We report here that by good design, polyaniline (PANI) can be cytocompatible and formed into usable scaffolds for bio-medical applications. By adjusting the ratio of two monomers, aniline (AN) and metanilic acid (MA), a series of copolymers with different sulfonation degrees have been synthesized. Four-probe conductivity measurements showed that as the sulfonation degree increased, the conductivity decreased.

Versatile methods for the fabrication of polyvinylidene fluoride microstructures.

Polyvinylidene fluoride (PVDF) microstructures are of interest for a number of BioMEMS applications both for their piezoelectric and biocompatible properties. In this work, simple soft lithography-based techniques were developed to fabricate PVDF microstructures with diverse geometries, including microarrays of pillars, lines, and wells. Four different microstructure configurations were created: freestanding, stamped discontinuous, stamped continuous and imprinted patterns.

Housekeeping gene stability influences the quantification of osteogenic markers during stem cell differentiation to the osteogenic lineage.

Real-time reverse transcription PCR (RT-qPCR) relies on a housekeeping or normalizer gene whose expression remains constant throughout the experiment. RT-qPCR is commonly used for characterization of human bone marrow mesenchymal stem cells (hBMSCs). However, to the best of our knowledge, there are no studies validating the expression stability of the genes used as normalizers during hBMSCs differentiation.