Liquid Repellence of Phobic Fiber Networks.

The wetting behavior of fiber networks, which are central to many research and industrial applications, can be difficult to predict accurately owing to their complex, heterogeneous structure. The cylindrical pore model, widely used to interpret and predict the forced wetting of hydrophobic porous materials, often does not yield correct results when working with fibrous networks like paper substrates and non-woven fabrics. This is because these materials exhibit variation in pore size, fiber length, and fiber diameter, as well as a reentrant pore geometry.

Underwater Curvature-Driven Transport between Oil Droplets on Patterned Substrates.

Roughness contrast patterns were generated on copper surfaces by a simple one-step site-selective oxidation process using a felt-tipped ink pen masking method. The patterned surface exhibited strong underwater oil wettability contrast which allows oil droplet confinement. Oil droplets placed on two patterned smooth dots (reservoirs) connected by a patterned smooth channel will spontaneously exchange liquid as a result of Laplace pressure differences until their shapes have reached equilibrium.

Sustainable and long-time 'rejuvenation' of biomimetic water-repellent silica coating on polyester fabrics induced by rough mechanical abrasion.

The economical use of water-repellent coatings on polymeric materials in commercial and industrial applications is limited by their mechanical wear robustness and long-term durability. In this study, we demonstrate that polyethylene terephthalate (PET) fabric modified with inorganic, methyltrimethoxysilane (MTMS)-based coatings shows excellent resistance against various types of wear damage, thereby mimicking superhydrophobic biological materials. These features were facilitated by the rational design of coating processing that also enabled tunable hierarchical surface structure.

Inhibition of Bacterial Adhesion on Nanotextured Stainless Steel 316L by Electrochemical Etching.

Bacterial adhesion to stainless steel 316L (SS316L), which is an alloy typically used in many medical devices and food processing equipment, can cause serious infections along with substantial healthcare costs. This work demonstrates that nanotextured SS316L surfaces produced by electrochemical etching effectively inhibit bacterial adhesion of both Gram-negative and Gram-positive , but exhibit cytocompatibility and no toxicity toward mammalian cells in vitro. Additionally, the electrochemical surface modification on SS316L results in formation of superior passive layer at the surface, improving corrosion resistance.

Underwater Oil Droplet Splitting on a Patterned Template.

Underwater oil droplets stretched and pinned by dual-dot oleophilic patterns on a superoleophobic substrate have been split into two nearly equal-volume daughter droplets using an underwater superoleophobic blade at substantially lower cutting speeds than reported in previous studies. A "liquid exchange model" based on Laplace pressure-driven liquid transport has been proposed to explain the mechanism of the underwater droplet split process. The dependence of droplet geometrical shape (curvature) and liquid properties (surface tension, viscosity) on the critical cutting speed that allows equal-volume split was investigated.

Two-Step Process To Create "Roll-Off" Superamphiphobic Paper Surfaces.

Surface modification of cellulose-based paper, which displays roll-off properties for water and oils (surface tension ≥23.8 mN·m) and good repellency toward n-heptane (20.1 mN·m), is reported.

Design and fabrication of superamphiphobic paper surfaces.

Cellulose-based paper remains a vital component of modern day society; however, its use is severely limited in certain applications because of hydrophilic and oleophilic properties. In this manuscript we present a novel method to create superamphiphobic paper by combining the control of fiber size and structure with plasma etching and fluoropolymer deposition. The heterogeneous nature of the paper structure is drastically different from that of artificially created superamphiphobic surfaces.

Creation of superhydrophobic stainless steel surfaces by acid treatments and hydrophobic film deposition.

In this work, we present a method to render stainless steel surfaces superhydrophobic while maintaining their corrosion resistance. Creation of surface roughness on 304 and 316 grade stainless steels was performed using a hydrofluoric acid bath. New insight into the etch process is developed through a detailed analysis of the chemical and physical changes that occur on the stainless steel surfaces.

Synthesis of Cu(2)ZnSnS(4) micro- and nanoparticles via a continuous-flow supercritical carbon dioxide process.

CZTS: Atlanta. A supercritical CO(2) continuous-flow reactor is employed to deposit micro- and nanoparticles of copper zinc tin sulfide (CZTS), a promising material for thin-film solar cells, onto a silicon wafer. The image shows a chemical map of deposited CZTS particles (scale bar: 15 μm), and a Raman spectrum with a peak characteristic of CZTS.

Tunable bands in biased multilayer epitaxial graphene.

We have studied the electronic characteristics of multilayer epitaxial graphene under a perpendicularly applied electric bias. Ultraviolet photoemission spectroscopy measurements reveal that there is notable variation of the electronic density-of-states in valence bands near the Fermi level. Evolution of the electronic structure of graphite and rotational-stacked multilayer epitaxial graphene as a function of the applied electric bias is investigated using first-principles density-functional theory including interlayer van der Waals interactions.

Surface-modified ZnSe waveguides for label-free infrared attenuated total reflection detection of DNA hybridization.

This communication presents a novel label-free biosensing method to monitor DNA hybridization via infrared attenuated total reflection (IR-ATR) spectroscopy using surface-modified ZnSe waveguides. Well-defined carboxyl-terminated monolayers were formed at H-terminated ZnSe by direct photochemical activation. Chemical activation of the acidic function was obtained by using succinimide/carbodiimide linkers.

Surface reactions in microelectronics process technology.

Current integrated circuit (IC) manufacturing consists of more than 800 process steps, nearly all of which involve reactions at surfaces that significantly impact device yield and performance. From initial surface preparation through film deposition, patterning, etching, residue removal, and metallization, an understanding of surface reactions and interactions is critical to the successful continuous scaling, yield, and reliability of electronic devices. In this review, some of the most important surface reactions that drive the development of microelectronic device fabrication are described.

Mechanically robust superhydrophobicity on hierarchically structured Si surfaces.

Improvement of the robustness of superhydrophobic surfaces is critical in order to achieve commercial applications of these surfaces in such diverse areas as self-cleaning, water repellency and corrosion resistance. In this study, the mechanical robustness of superhydrophobic surfaces was evaluated on hierarchically structured silicon surfaces. The effect of two-scale hierarchical structures on robustness was investigated using an abrasion test and the results compared to those of superhydrophobic surfaces fabricated from polymeric materials and from silicon that contains only nanostructures.

Silicon surface structure-controlled oleophobicity.

Superoleophobic surfaces display contact angles >150 degrees with liquids that have lower surface energies than does water. The design of superoleophobic surfaces requires an understanding of the effect of the geometrical shape of etched silicon surfaces on the contact angle and hysteresis observed when different liquids are brought into contact with these surfaces. This study used liquid-based metal-assisted etching and various silane treatments to create superoleophobic surfaces on a Si(111) surface.

Patterning of superhydrophobic paper to control the mobility of micro-liter drops for two-dimensional lab-on-paper applications.

Superhydrophobic paper substrates were patterned with high surface energy black ink using commercially available desktop printing technology. The shape and size of the ink islands were designed to control the adhesion forces on water drops in two directions, parallel ('drag-adhesion') and perpendicular ('extensional-adhesion') to the substrate. Experimental data on the adhesion forces shows good agreement with classical models for 'drag' (Furmidge equation) and 'extensional' adhesion (modified Dupré equation).

Superhydrophobic and low light reflectivity silicon surfaces fabricated by hierarchical etching.

Silicon is employed in a variety of electronic and optical devices such as integrated circuits, photovoltaics, sensors, and detectors. In this paper, Au-assisted etching of silicon has been used to prepare superhydrophobic surfaces that may add unique properties to such devices. Surfaces were characterized by contact angle and contact angle hysteresis.

UV and thermally stable superhydrophobic coatings from sol-gel processing.

A method for the preparation of inorganic superhydrophobic silica coatings using sol-gel processing with tetramethoxysilane and isobutyltrimethoxysilane as precursors is described. Incorporation of isobutyltrimethoxysilane into silica layers resulted in the existence of hydrophobic isobutyl surface groups, thereby generating surface hydrophobicity. When combined with the surface roughness that resulted from sol-gel processing, a superhydrophobic surface was achieved.

Plasma-deposited fluorocarbon films: insulation material for microelectrodes and combined atomic force microscopy-scanning electrochemical microscopy probes.

Pinhole-free insulation of micro- and nanoelectrodes is the key to successful microelectrochemical experiments performed in vivo or in combination with scanning probe experiments. A novel insulation technique based on fluorocarbon insulation layers deposited from pentafluoroethane (PFE, CF3CHF2) plasmas is presented as a promising electrical insulation approach for microelectrodes and combined atomic force microscopy-scanning electrochemical microscopy (AFM-SECM) probes. The deposition allows reproducible and uniform coating, which is essential for many analytical applications of micro- and nanoelectrodes such as, e.

Fabrication of "roll-off" and "sticky" superhydrophobic cellulose surfaces via plasma processing.

Most of the artificial superhydrophobic surfaces that have been fabricated to date are not biodegradable, renewable, or mechanically flexible and are often expensive, which limits their potential applications. In contrast, cellulose, a biodegradable, renewable, flexible, inexpensive, biopolymer which is abundantly present in nature, satisfies all the above requirements, but it is not superhydrophobic. Superhydrophobicity on cellulose paper was obtained by domain-selective etching of amorphous portions of the cellulose in an oxygen plasma and subsequently coating the etched surface with a thin fluorocarbon film deposited via plasma-enhanced chemical vapor deposition using pentafluoroethane as a precursor.

Mid-infrared chemical sensors utilizing plasma-deposited fluorocarbon membranes.

In this study, plasma-polymerized films are evaluated as enrichment membranes deposited at the surface of mid-infrared transparent waveguides for liquid-phase chemical sensing utilizing evanescent field absorption spectroscopy. Fluorocarbon films were deposited onto zinc selenide (ZnSe) waveguides from plasma-polymerized pentafluoroethane (CF(3)CHF(2)) vapor. Excellent optical transmission of ZnSe waveguides after plasma deposition confirms compatibility of the infrared transparent substrate with this low-temperature, solvent-free film deposition process.

Hierarchical silicon etched structures for controlled hydrophobicity/superhydrophobicity.

Silicon surface hydrophobicity has been varied by using silane treatments on silicon pyramid surfaces generated by KOH anisotropic etching. Results demonstrated that by altering the surface hydrophobicity, the apparent contact angle changed in accord with the Wenzel equation for surface structures with inclined side walls. Hierarchical structures were also constructed from Si pyramids where nanostructures were added by Au-assisted electroless HF/H2O2 etching.

Biomimetic creation of hierarchical surface structures by combining colloidal self-assembly and Au sputter deposition.

Surfaces of hexagonally packed silica spheres have been functionalized with silanes containing different hydrocarbon or fluorocarbon chains. The resulting chemical and physical structures were studied to establish the effect of surface hydrophobicity on the measured contact angles on the rough surfaces. The results were used to assess the effects of surface modifications on the parameters in the Cassie equation.

Electrowetting of aligned carbon nanotube films.

Electrowetting is one approach to reducing the interfacial tension between a solid and a liquid. In this method, an electrical potential is applied across the solid/liquid interface which modifies the wetting properties of the liquid on the solid without changing the composition of the solid and liquid phases. Electrowetting of aligned carbon nanotube (CNT) films is investigated by the sessile drop method by dispensing deionized (DI) water or 0.