Bending properties of human cartilaginous ribs and costal cartilage material vary with age, sex, and calcification.

Costal cartilage plays an important functional role in the rib cage, but its mechanical properties have not been well characterized. The objective of this study is to characterize the properties of human costal cartilage and examine the effects of age, sex, rib level, and degree of calcification. We obtained cadaveric costal cartilage samples of ribs 3-6 with intact perichondrium from 24 donors (12 females and 12 males) evenly distributed by age (range 47-94 yr).

Musculoskeletal models determine the effect of a soft active exosuit on muscle activations and forces during lifting and lowering tasks.

Exosuits have the potential to mitigate musculoskeletal stress and prevent back injuries during industrial tasks. This study aimed to 1) validate the implementation of a soft active exosuit into a musculoskeletal model of the spine by comparing model predicted muscle activations versus corresponding surface EMG measurements, and 2) evaluate the effect of the exosuit on peak back and hip muscle forces. Fourteen healthy participants performed squat and stoop lift and lower tasks with boxes of 6 and 10 kg, with and without wearing a 2.

An OpenSim thoracolumbar spine model applying a bottom-up modelling approach is similar to a top-down approach.

The kinetic demands of the spine can be assessed using a top-down (TD) or bottom-up (BU) approach, which start calculations from the either the hands or from the feet, respectively. Biomechanists have traditionally favored a BU approach, though existing modeling approaches encourage a TD approach. Regardless of the approach the demands should be similar, provided the external forces and linked segment parameters are equivalently measured and modeled.

Biomechanical analysis of complications following T10-Pelvis spinal fusion: A population based computational study.

Proximal junctional kyphosis (PJK) and proximal junctional failure (PJF) are challenging complications of long fusion constructs for the treatment of adult spinal deformity. The objective of this study is to understand the biomechanical stresses proximal to the upper instrumentation of a T10-pelvis fusion in a large patient cohort. The pre-fusion models were subject-specific thoracolumbar spine models that incorporate the height, weight, spine curvature, and muscle morphology of 250 individuals from the Framingham Heart Study Multidetector CT Study.

The effect of a soft active back support exosuit on trunk motion and thoracolumbar spine loading during squat and stoop lifts.

Back support exosuits aim to reduce tissue demands and thereby risk of injury and pain. However, biomechanical analyses of soft active exosuit designs have been limited. The objective of this study was to evaluate the effect of a soft active back support exosuit on trunk motion and thoracolumbar spine loading in participants performing stoop and squat lifts of 6 and 10 kg crates, using participant-specific musculoskeletal models.

Using inertial measurement units to estimate spine joint kinematics and kinetics during walking and running.

Optical motion capture (OMC) is considered the best available method for measuring spine kinematics, yet inertial measurement units (IMU) have the potential to collect data outside the laboratory. When combined with musculoskeletal modeling, IMU technology may be used to estimate spinal loads in real-world settings. To date, IMUs have not been validated for estimates of spinal movement and loading during both walking and running.

Validity of evaluating spinal kinetics without participant-specific kinematics.

Musculoskeletal models are commonly used to estimate in vivo spinal loads under various loading conditions. Typically, participant-specific measured kinematics (PSMK) are coupled with participant-specific models, but obtaining PSMK data can be costly and infeasible in large studies or clinical practice. Thus, we evaluated two alternative methods to estimate spinal loads without PSMK: 1) ensemble average kinematics (EAK) based on kinematics from all participants; and 2) using separately measured individual kinematics (SMIK) from multiple other participants as inputs, then averaging the resulting loads.

Dependence of trunk muscle size and position on age, height, and weight in a multi-ethnic cohort of middle-aged and older men and women.

Trunk muscle size and location relative to the spine are key factors affecting their capacity to assist in trunk movement, strength, and function. There remains limited information on how age, weight and height affect these measurements across multiple spinal levels, and prior studies had limited samples in terms of size and ethnicity. In this study, we measured trunk muscles in coronal plane slices at T4 - L4 of CT scans acquired in 507 participants, aged 40-90 years, from the community-based Framingham Heart Study.

EMG Validation of a Subject-Specific Thoracolumbar Spine Musculoskeletal Model During Dynamic Activities in Older Adults.

Musculoskeletal models can uniquely estimate in vivo demands and injury risk. In this study, we aimed to compare muscle activations from subject-specific thoracolumbar spine OpenSim models with recorded muscle activity from electromyography (EMG) during five dynamic tasks. Specifically, 11 older adults (mean = 65 years, SD = 9) lifted a crate weighted to 10% of their body mass in axial rotation, 2-handed sagittal lift, 1-handed sagittal lift, and lateral bending, and simulated a window opening task.

Simple magnesium alkoxides: synthesis, molecular structure, and catalytic behaviour in the ring-opening polymerization of lactide and macrolactones and in the copolymerization of maleic anhydride and propylene oxide.

The synthesis of two chiral bulky alkoxide pro-ligands, 1-adamantyl--butylphenylmethanol HOCAdBuPh and 1-adamantylmethylphenylmethanol HOCAdMePh, is reported and their coordination chemistry with magnesium(II) is described and compared with the coordination chemistry of the previously reported achiral bulky alkoxide pro-ligand HOCBuPh. Treatment of -butyl--butylmagnesium with two equivalents of the racemic mixture of HOCAdBuPh led selectively to the formation of the mononuclear bis(alkoxide) complex Mg(OCAdBuPh)(THF). H NMR spectroscopy and X-ray crystallography suggested the selective formation of the -symmetric homochiral diastereomer Mg(OCAdBuPh)(THF)/Mg(OCAdBuPh)(THF).

Biomechanical Phenotyping of Chronic Low Back Pain: Protocol for BACPAC.

Objective: Biomechanics represents the common final output through which all biopsychosocial constructs of back pain must pass, making it a rich target for phenotyping. To exploit this feature, several sites within the NIH Back Pain Consortium (BACPAC) have developed biomechanics measurement and phenotyping tools. The overall aims of this article were to: 1) provide a narrative review of biomechanics as a phenotyping tool; 2) describe the diverse array of tools and outcome measures that exist within BACPAC; and 3) highlight how leveraging these technologies with the other data collected within BACPAC could elucidate the relationship between biomechanics and other metrics used to characterize low back pain (LBP).

Deep Learning for Multi-Tissue Segmentation and Fully Automatic Personalized Biomechanical Models from BACPAC Clinical Lumbar Spine MRI.

Study Design: In vivo retrospective study of fully automatic quantitative imaging feature extraction from clinically acquired lumbar spine magnetic resonance imaging (MRI).

Objective: To demonstrate the feasibility of substituting automatic for human-demarcated segmentation of major anatomic structures in clinical lumbar spine MRI to generate quantitative image-based features and biomechanical models.

Setting: Previous studies have demonstrated the viability of automatic segmentation applied to medical images; however, the feasibility of these networks to segment clinically acquired images has not yet been demonstrated, as they largely rely on specialized sequences or strict quality of imaging data to achieve good performance.

Using static postures to estimate spinal loading during dynamic lifts with participant-specific thoracolumbar musculoskeletal models.

Static biomechanical simulations are sometimes used to estimate in vivo kinetic demands because they can be solved efficiently, but this ignores any potential inertial effects. To date, comparisons between static and dynamic analyses of spinal demands have been limited to lumbar joint differences in young males performing sagittal lifts. Here we compare static and dynamic vertebral compressive and shear force estimates during axial, lateral, and sagittal lifting tasks across all thoracic and lumbar vertebrae in older men and women.

Evaluation of Load-To-Strength Ratios in Metastatic Vertebrae and Comparison With Age- and Sex-Matched Healthy Individuals.

Vertebrae containing osteolytic and osteosclerotic bone metastases undergo pathologic vertebral fracture (PVF) when the lesioned vertebrae fail to carry daily loads. We hypothesize that task-specific spinal loading patterns amplify the risk of PVF, with a higher degree of risk in osteolytic than in osteosclerotic vertebrae. To test this hypothesis, we obtained clinical CT images of 11 cadaveric spines with bone metastases, estimated the individual vertebral strength from the CT data, and created spine-specific musculoskeletal models from the CT data.

Distinct Bimetallic Cooperativity Among Water Reduction Catalysts Containing [Co Co ], [Ni Ni ], and [Zn Zn ] Cores.

Three binuclear species [LCo (μ-Pz) ](ClO ) (1), [LNi (CH OH) Cl ]ClO (2), and [LZn Cl ]PF (3) supported by the deprotonated form of the ligand 2,6-bis[bis(2-pyridylmethyl) amino-methyl]-4-methylphenol were synthesized, structurally characterized as solids and in solution, and had their electrochemical and spectroscopic behavior established. Species 1-3 had their water reduction ability studied aiming to interrogate the possible cooperative catalytic activity between two neighboring metal centers. Species 1 and 2 reduced H O to H effectively at an applied potential of -1.

Walking Biomechanics and Spine Loading in Patients With Symptomatic Lumbar Spinal Stenosis.

Symptomatic lumbar spinal stenosis is a leading cause of pain and mobility limitation in older adults. It is clinically believed that patients with lumbar spinal stenosis adopt a flexed trunk posture or bend forward and alter their gait pattern to improve tolerance for walking. However, a biomechanical assessment of spine posture and motion during walking is broadly lacking in these patients.

The Influence of Kinematic Constraints on Model Performance During Inverse Kinematics Analysis of the Thoracolumbar Spine.

Motion analysis is increasingly applied to spine musculoskeletal models using kinematic constraints to estimate individual intervertebral joint movements, which cannot be directly measured from the skin surface markers. Traditionally, kinematic constraints have allowed a single spinal degree of freedom (DOF) in each direction, and there has been little examination of how different kinematic constraints affect evaluations of spine motion. Thus, the objective of this study was to evaluate the performance of different kinematic constraints for inverse kinematics analysis.

Patterns of Load-to-Strength Ratios Along the Spine in a Population-Based Cohort to Evaluate the Contribution of Spinal Loading to Vertebral Fractures.

Vertebral fractures (VFx) are common among older adults. Epidemiological studies report high occurrence of VFx at mid-thoracic and thoracolumbar regions of the spine; however, reasons for this observation remain poorly understood. Prior reports of high ratios of spinal loading to vertebral strength in the thoracolumbar region suggest a possible biomechanical explanation.

Validity of flexicurve and motion capture for measurements of thoracic kyphosis vs standing radiographic measurements.

Thoracic kyphosis varies among healthy adults and typically increases with age. Excessive kyphosis (hyperkyphosis) is associated with negative health. Spinal alignment also affects spine loading, with implications for conditions such as vertebral fractures and back pain.

Between-session reliability of subject-specific musculoskeletal models of the spine derived from optoelectronic motion capture data.

This study evaluated the between-session reliability of creating subject-specific musculoskeletal models with optoelectronic motion capture data, and using them to estimate spine loading. Nineteen healthy participants aged 24-74 years underwent the same set of measurements on two separate occasions. Retroreflective markers were placed on anatomical regions, including C7, T1, T4, T5, T8, T9, T12 and L1 spinous processes, pelvis, upper and lower limbs, and head.

Spinal Compressive Forces in Adolescent Idiopathic Scoliosis With and Without Carrying Loads: A Musculoskeletal Modeling Study.

The pathomechanisms of curve progression in adolescent idiopathic scoliosis (AIS) remain poorly understood and biomechanical data are limited. A deeper insight into spinal loading could provide valuable information toward the improvement of current treatment strategies. This work therefore aimed at using subject-specific musculoskeletal full-body models of patients with AIS to predict segmental compressive forces around the curve apex and to investigate how these forces are affected by simulated load carrying.

Slow your role: How slowing clozapine titration can prevent recurrent NMS.

Ms. D. was a 57-year-old Caucasian female with a past psychiatric history of schizoaffective disorder bipolar type and unspecified anxiety disorder.

Moment-rotation behavior of intervertebral joints in flexion-extension, lateral bending, and axial rotation at all levels of the human spine: A structured review and meta-regression analysis.

Spinal intervertebral joints are complex structures allowing motion in multiple directions, and many experimental studies have reported moment-rotation response. However, experimental methods, reporting of results, and levels of the spine tested vary widely, and a comprehensive assessment of moment-rotation response across all levels of the spine is lacking. This review aims to characterize moment-rotation response in a consistent manner for all levels of the human spine.