Identifying the Molecular Fingerprint of Beta-Lactams via Raman/SERS Spectroscopy Using Unconventional Nanoparticles for Antimicrobial Stewardship.

Beta-lactam antibiotics, derived from penicillin, are the most used class of antimicrobials used for treating bacterial infections. Over the years, microorganisms have developed resistance mechanisms capable of preventing the effect of these drugs. This condition has been a significant public health concern for the 21st century, especially after predictions that antimicrobial resistance could lead to 10 million deaths annually by 2050.

External Root Temperature and Its Relationship With Dentin Thickness During Gutta-Percha Removal Procedures With Ultrasound. An Ex Vivo Study.

Introduction: This study aims to evaluate the temperature rise on the external root surface during gutta-percha removal with 2 types of ultrasonic tips, and its relationship with the root dentin thickness.

Methods: A total of 56 single-rooted teeth were prepared for gutta-percha removal procedures, conducted for 40 seconds using 2 types of ultrasonic tips at depths of 6 mm and 11 mm. The temperature generated was measured using a type K thermocouple at 3 measurement points.

ATR-FTIR spectroscopy imaging of bone repair in mandibular laser-osteotomy.

The aim of this study was to verify the effectiveness of attenuated total reflectance-fourier transform infrared (ATR-FTIR) spectroscopy in the characterization of bone repair in mandibular osteotomy using erbium, chromium-doped yttrium, scandium, gallium and garnet (Er,Cr:YSGG) laser and multilaminate drill on each side. Two mandible bone fragments were removed from 30 rabbits, and the process of bone repair was studied immediately, 3, 7, 15, 21, and 28 days after the surgery. The histological analysis allowed detecting differences in the early stages of tissue repair after bone cutting performed with the Er,Cr:YSGG laser or multilaminate drill.

Recognition of breast cancer subtypes using FTIR hyperspectral data.

Fourier-transform infrared spectroscopy (FTIR) is a powerful, non-destructive, highly sensitive and a promising analytical technique to provide spectrochemical signatures of biological samples, where markers like carbohydrates, proteins, and phosphate groups of DNA can be recognized in biological micro-environment. However, method of measurements of large cells need an excessive time to achieve high quality images, making its clinical use difficult due to speed of data-acquisition and lack of optimized computational procedures. To address such challenges, Machine Learning (ML) based technologies can assist to assess an accurate prognostication of breast cancer (BC) subtypes with high performance.

Latin America Optics and Photonics 2022: introduction to the feature issue.

The 2022 Latin America Optics and Photonics Conference (LAOP 2022), the major international conference sponsored by Optica in Latin America, returned to Recife, Pernambuco, Brazil, after its first edition in 2010. Held every two years since (except for 2020), LAOP has the explicit objective to promote Latin American excellence in optics and photonics research and support the regional community. In the 6th edition in 2022, it featured a comprehensive technical program with recognized experts in fields critical to Latin America, highly multidisciplinary, with themes from biophotonics to 2D materials.

Rapid identification of breast cancer subtypes using micro-FTIR and machine learning methods.

Breast cancer (BC) molecular subtypes diagnosis involves improving clinical uptake by Fourier transform infrared (FTIR) spectroscopic imaging, which is a non-destructive and powerful technique, enabling label free extraction of biochemical information towards prognostic stratification and evaluation of cell functionality. However, methods of measurements of samples demand a long time to achieve high quality images, making its clinical use impractical because of the data acquisition speed, poor signal to noise ratio, and deficiency of optimized computational framework procedures. To address those challenges, machine learning (ML) tools can facilitate obtaining an accurate classification of BC subtypes with high actionability and accuracy.

Monitoring glucose levels in urine using FTIR spectroscopy combined with univariate and multivariate statistical methods.

The development of novel platforms for non-invasive continuous glucose monitoring applied in the screening and monitoring of diabetes is crucial to improve diabetes surveillance systems. Attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy of urine can be an alternative as a sustainable, label-free, fast, non-invasive, and highly sensitive analysis to detect changes in urine promoted by diabetes and insulin treatment. In this study, we used ATR-FTIR to evaluate the urinary components of non-diabetic (ND), diabetic (D), and diabetic insulin-treated (D + I) rats.

Does Photobiomodulation Affects CK10 and CK14 in Oral Mucositis Radioinduced Repair?

The mechanisms of action of photobiomodulation (PBM) in oral mucositis (OM) are not completely elucidated. To enlighten the role of PBM in the evolution of epithelial maturity in OM ulcers, the present study evaluated the effect of PBM with red (λ) wavelength of 660 nanometers (nm) and infrared of 780 nm in radio-induced OM wounds on the tongue of rats, eight and twenty days after irradiation with single dose of 20 Gy. The percentage area corresponding to positive staining for cytokeratin 10 (CK10) and 14 (CK14) proteins was evaluated in the epithelial area of the lesions, using an immunohistochemical technique (IHC), 8 and 20 days after the induction of lesions, and compared with an untreated control group.

Thermal damage and excision time of micro and super pulsed diode lasers: A comparative ex vivo analysis.

Objectives: The primary aim of this ex vivo study was to evaluate thermal damage and cutting efficiency of micro and super pulsed diode lasers. The secondary aim was to suggest a guideline to perform simple surgical excisions adequate for histopathological evaluation.

Material And Methods: Ten groups of 10 specimens of pig tongues were excised using a blade (G1), a micro pulsed (G2-G9), and a super pulsed diode (G10) lasers.

Optimizing and Quantifying Gold Nanospheres Based on LSPR Label-Free Biosensor for Dengue Diagnosis.

The localized surface plasmon resonance (LSPR) due to light-particle interaction and its dependence on the surrounding medium have been widely manipulated for sensing applications. The sensing efficiency is governed by the refractive index-based sensitivity (ηRIS) and the full width half maximum (FWHM) of the LSPR spectra. Thereby, a sensor with high precision must possess both requisites: an effective ηRIS and a narrow FWHM of plasmon spectrum.

Triple-negative breast cancer treatment in xenograft models by bifunctional nanoprobes combined to photodynamic therapy.

Triple-negative breast cancer (TNBC) overexpresses the Epidermal Growth Factor Receptor (EGFR), a characteristic of different types of tumors, linked to worse disease prognosis and risk of recurrence. Conventional treatments are also aggressive and can be morbid..

Exploiting Nanomaterials for Optical Coherence Tomography and Photoacoustic Imaging in Nanodentistry.

There is already a societal awareness of the growing impact of nanoscience and nanotechnology, with nanomaterials (with at least one dimension less than 100 nm) now incorporated in items as diverse as mobile phones, clothes or dentifrices. In the healthcare area, nanoparticles of biocompatible materials have already been used for cancer treatment or bioimaging enhancement. Nanotechnology in dentistry, or nanodentistry, has already found some developments in dental nanomaterials for caries management, restorative dentistry and orthodontic adhesives.

Surface profile of different heat-treated nickel-titanium files before and after root canal preparation.

The aim of this study was to evaluate surface wear, presence of microcracks and surface irregularities of WaveOne (WO) and WaveOne Gold (WOG) instruments before and after multiple uses. Eight Primary instruments of the WO and WOG systems were evaluated, each one was used to prepare six mesial canals of extracted human mandibular molars. The surface of the instruments was evaluated before use (T0), after instrumentation of three (T1) and six (T2) root canals.

Assessment of the preventive effects of Nd:YAG laser associated with fluoride on enamel caries using optical coherence tomography and FTIR spectroscopy.

Objective: This in vitro study characterized and monitored, by Optical Coherence Tomography (OCT) and Fourier Transformed Infrared Spectroscopy (FTIR), the effects of the association of acidulated phosphate fluoride gel (APF-gel) and Nd:YAG (neodymiun:yttrium-aluminum-garnet) laser, as sequencial treatments, in the prevention of incipient enamel caries lesions.

Methods: 120 human enamel samples were randomized into 3 groups (n = 40): APF-gel (1.23% F-, 4 min.

Bioactive glass/poloxamer 407 hydrogel composite as a drug delivery system: The interplay between glass dissolution and drug release kinetics.

Since patients suffer pain in the post-surgery of bone repair interventions, bioactive glass/hydrogel drug delivery systems containing local anesthetics, such as ropivacaine, could improve patient life quality by combining bone regeneration with anesthetics. However, poloxamer-based hydrogel properties are sensitive to ions, temperature, and water contents and could be structurally influenced by the ionic dissolution products from bioactive glasses of different compositions. Therefore, this study evaluated the interplay between bioactive glass dissolution kinetics and poloxamer 407 properties, establishing a correlation between changes in the hydrogel and drug release kinetics.

Association of Nd:YAG laser and calcium-phosphate desensitizing pastes on dentin permeability and tubule occlusion.

Objective: To evaluate the efficacy of Nd:YAG laser associated with calcium-phosphate desensitizing pastes on dentin permeability and tubule occlusion after erosive/abrasive challenges.

Methodology: Dentin specimens were exposed to 17% ethylene diamine tetra-acetic acid (EDTA) solution for 5 min and randomly allocated into five groups: G1, control (no treatment); G2, Nd:YAG laser (1 W, 10 Hz, 100 mJ, 85 J/cm2); G3, Laser + TeethmateTM Desensitizer; G4, Laser + Desensibilize Nano P; and G5, Laser+Nupro®. Specimens underwent a 5-day erosion-abrasion cycling.

Evaluating biochemical differences in thyroglobulin from normal and goiter tissues by infrared spectral imaging.

Thyroglobulin is a glycoiodoprotein that is produced by thyroid follicular cells; it is stored in follicles in structures known as colloids. The main function of this protein is to stock the hormones triiodothyronine (T3) and thyroxine (T4) until the body requires them. This study aims to demonstrate that infrared spectral imaging with appropriate multivariate analysis can reveal biochemical changes in this glycoprotein.

Morphological, optical, and elemental analysis of dental enamel after debonding laminate veneer with Er,Cr:YSGG laser: A pilot study.

Laminate veneer removal is becoming a routine procedure at the dental clinic and the use of laser can facilitate its removal. This work aimed to evaluate the morphological, elemental, and optical changes in the remaining enamel after veneer removal using Er,Cr:YSGG laser. Forty-four enamel slabs were prepared and randomly distributed into nine experimental groups, for bonding using lithium disilicate laminates with three different luting agents (Variolink Veneer, RelyX U200, and RelyX Veneer).

The lingual enamel morphology and bracket shear bond strength influenced by Nd:YAG laser and aluminum oxide sandblasting preconditioning.

Objectives: This study aimed to investigate the influence of Nd:YAG laser and aluminum oxide sandblasting on the shear bond strength (SBS) of lingual brackets and to optically analyze the behavior of the enamel morphology.

Materials And Methods: Thirty-five bovines' incisors teeth were divided into 5 groups (n = 7), according to the surface preconditioning: G1, control group; G2, Nd:YAG laser; G3, laser + aluminum oxide sandblasting (AlO); G4, AlO; and G5, AlO + laser. All groups had lingual brackets bonded and shear debonded after 72 h.

Surface Evaluation of Enamel Etched by Er,Cr:YSGG Laser for Orthodontic Purpose.

Aim: To compare the effect of erbium, chromium:yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser at different irradiation parameters and acid etching on the shear bond strength (SBS) of orthodontic brackets to enamel.

Materials And Methods: Forty bovine incisors were randomly distributed into groups ( = 10): GI: 37% phosphoric acid etching; GII: Er,Cr:YSGG laser etching 19.1 J/cm; GIII: Er,Cr:YSGG, 29.

Monitoring the Progress and Healing Status of Burn Wounds Using Infrared Spectroscopy.

Burns are one of the leading causes of morbidity worldwide and the most costly traumatic injuries. A better understanding of the molecular mechanisms in wound healing is required to accelerate tissue recovery and reduce the health economic impact. However, the standard techniques used to evaluate the biological events associated to wound repair are laborious, time-consuming, and/or require multiple assays/staining.

General model for depth-resolved estimation of the optical attenuation coefficients in optical coherence tomography.

We present the proof of concept of a general model that uses the tissue sample transmittance as input to estimate the depth-resolved attenuation coefficient of tissue samples using optical coherence tomography (OCT). This method allows us to obtain an image of tissue optical properties instead of intensity contrast, guiding diagnosis and tissues differentiation, extending its application from thick to thin samples. The performance of our method was simulated and tested with the assistance of a home built single-layered and multilayered phantoms (~100 μm each layer) with known attenuation coefficient on the range of 0.

Effect of Er,Cr:YSGG laser associated with fluoride on the control of enamel erosion progression.

Objective: To evaluate the effect of Er,Cr:YSGG laser associated or not with acidulated phosphate fluoride (APF) on the control of enamel erosion progression.

Design: Enamel slabs (4 mm × 4 mm × 2 mm) from bovine incisors were flattened, polished, and received a tape on their test surfaces, leaving a 4 mm × 1 mm area exposed. Specimens were eroded (10 min in 1% citric acid solution) and randomly assigned into 8 experimental groups (n = 10): Control (no treatment); F (APF gel, 1.

Effectiveness and acid/tooth brushing resistance of in-office desensitizing treatments-A hydraulic conductance study.

Objective: To evaluate dentin permeability and tubule occlusion of in-office desensitizing treatments, and to analyze their resistance to erosive/abrasive challenges.

Design: Ninety-one 1mm-thick dentin discs were immersed in EDTA solution for 5 min. After analyzing the maximum dentin permeability, the specimens were randomly allocated into 7 experimental groups (n = 10): Control (no treatment); Er,Cr:YSGG laser; Nd:YAG laser; Gluma Desensitizer; Duraphat; Pro-Argin toothpaste; Calcium Sodium Phosphosilicate (CSP) paste.