Correction: SARS-CoV-2 and approaches for a testing and diagnostic strategy.

Correction for 'SARS-CoV-2 and approaches for a testing and diagnostic strategy' by Delyan R. Hristov , , 2021, , 8157-8173, DOI: https://doi.org/10.

Mucoadhesion and In Vitro Intestinal Permeability of Mannosylated Chitosan Nanocarriers.

Crosslinked chitosan nanocarriers (140-160 nm) entrapping coumarin-6 ( = 455/508 nm) with or without surface mannosylation were synthesized and assessed for cytotoxicity, adherence and cellular uptake in Caco-2 cells, flux across Caco-2 monolayers, and mucoadhesion to porcine mucin. Mannosylated and non-mannosylated nanocarriers demonstrated biocompatibility with slow release of coumarin-6 at pH 6.8 and 7.

SARS-CoV-2 and approaches for a testing and diagnostic strategy.

The COVID-19 pandemic has led to an unprecedented global health challenge, creating sudden, massive demands for diagnostic testing, treatment, therapies, and vaccines. In particular, the development of diagnostic assays for SARS-CoV-2 has been pursued as they are needed for quarantine, disease surveillance, and patient treatment. One of the major lessons the pandemic highlighted was the need for fast, cheap, scalable and reliable diagnostic methods, such as paper-based assays.

Developing a Paper-Based Antigen Assay to Differentiate between Coronaviruses and SARS-CoV-2 Spike Variants.

COVID-19 first appeared in December of 2019 in Wuhan, China. Since then, it has become a global pandemic. A robust and scalable diagnostics strategy is crucial for containing and monitoring the pandemic.

Impact of dynamic sub-populations within grafted chains on the protein binding and colloidal stability of PEGylated nanoparticles.

Polyethylene glycol grafting has played a central role in preparing the surfaces of nano-probes for biological interaction, to extend blood circulation times and to modulate protein recognition and cellular uptake. However, the role of PEG graft dynamics and conformation in determining surface recognition processes is poorly understood primarily due to the absence of a microscopic picture of the surface presentation of the polymer. Here a detailed NMR analysis reveals three types of dynamic ethylene glycol units on PEG-grafted SiO2 nanoparticles (NPs) of the type commonly evaluated as long-circulating theranostic nano-probes; a narrow fraction with fast dynamics associated with the chain ends; a broadened fraction spectrally overlapped with the former arising from those parts of the chain experiencing some dynamic restriction; and a fraction too broad to be observed in the spectrum arising from units closer to the surface/graft which undergo slow motion on the NMR timescale.

The Immunoprobe Aggregation State is Central to Dipstick Immunoassay Performance.

As new infectious disease outbreaks become more likely, it is important to be able to develop and deploy appropriate testing in time. Paper-based immunoassays are rapid, cheap, and easy to produce at scale and relatively user friendly but often suffer from low selectivity and sensitivity. Understanding the molecular mechanisms of paper immunoassays may help improve and hasten development and therefore production and market availability.

Silica-Coated Nanoparticles with a Core of Zinc, l-Arginine, and a Peptide Designed for Oral Delivery.

Nanoparticle constructs for oral peptide delivery at a minimum must protect and present the peptide at the small intestinal epithelium in order to achieve oral bioavailability. In a reproducible, scalable, surfactant-free process, a core was formed with insulin in ratios with two established excipients and stabilizers, zinc chloride and l-arginine. Cross-linking was achieved with silica, which formed an outer shell.

Labrasol® is an efficacious intestinal permeation enhancer across rat intestine: Ex vivo and in vivo rat studies.

Labrasol® ALF (Labrasol®), is a non-ionic surfactant excipient primarily used as a solubilising agent. It was investigated here as an intestinal permeation enhancer in isolated rat colonic mucosae in Ussing chamber and in rat in situ intestinal instillations. Labrasol® comprises mono-, di- and triglycerides and mono- and di- fatty acid esters of polyethylene glycol (PEG)-8 and free PEG-8, with caprylic (C)- and capric acid (C) as the main fatty acids.

Designing Paper-Based Immunoassays for Biomedical Applications.

Paper-based sensors and assays have been highly attractive for numerous biological applications, including rapid diagnostics and assays for disease detection, food safety, and clinical care. In particular, the paper immunoassay has helped drive many applications in global health due to its low cost and simplicity of operation. This review is aimed at examining the fundamentals of the technology, as well as different implementations of paper-based assays and discuss novel strategies for improving their sensitivity, performance, or enabling new capabilities.

Low uptake of silica nanoparticles in Caco-2 intestinal epithelial barriers.

Cellular barriers, such as the skin, the lung epithelium or the intestinal epithelium, constitute one of the first obstacles facing nanomedicines or other nanoparticles entering organisms. It is thus important to assess the capacity of nanoparticles to enter and transport across such barriers. In this work, Caco-2 intestinal epithelial cells were used as a well-established model for the intestinal barrier, and the uptake, trafficking and translocation of model silica nanoparticles of different sizes were investigated using a combination of imaging, flow cytometry and transport studies.

Efficacy assessment of self-assembled PLGA-PEG-PLGA nanoparticles: Correlation of nano-bio interface interactions, biodistribution, internalization and gene expression studies.

The aim of our study was to develop and compare the biological performance of two types of biodegradable SN-38 loaded nanoparticles (NPs) with various surface properties, composed of low and high Mw triblock PLGA-PEG-PLGA copolymers, applying rational quality and safety by design approach. Therefore, along with the optimization of crucial physico-chemical properties and in order to evaluate the therapeutical potential and biocompatibility of prepared polymeric nanoparticles, analysis of nano-bio interactions, cell internalization, gene expression and biodistribution studies were performed. The optimized formulations, one of low Mw and one composed of high Mw PLGA-PEG-PLGA copolymer, exhibited different characteristics in terms of surface properties, particle size, zeta potential, drug loading, protein adsorption and biodistribution, which may be attributed to the variations in nano-bio interface interactions due to different NP building blocks length and Mw.

Using single nanoparticle tracking obtained by nanophotonic force microscopy to simultaneously characterize nanoparticle size distribution and nanoparticle-surface interactions.

Comprehensive characterization of nanomaterials for medical applications is a challenging and complex task due to the multitude of parameters which need to be taken into consideration in a broad range of conditions. Routine methods such as dynamic light scattering or nanoparticle tracking analysis provide some insight into the physicochemical properties of particle dispersions. For nanomedicine applications the information they supply can be of limited use.

Identification of Receptor Binding to the Biomolecular Corona of Nanoparticles.

Biomolecules adsorbed on nanoparticles are known to confer a biological identity to nanoparticles, mediating the interactions with cells and biological barriers. However, how these molecules are presented on the particle surface in biological milieu remains unclear. The central aim of this study is to identify key protein recognition motifs and link them to specific cell-receptor interactions.

Mapping of Molecular Structure of the Nanoscale Surface in Bionanoparticles.

Characterizing the orientation of covalently conjugated proteins on nanoparticles, produced for in vitro and in vivo targeting, though an important feature of such a system, has proved challenging. Although extensive physicochemical characterization of targeting nanoparticles can be addressed in detail, relevant biological characterization of the nanointerface is crucial in order to select suitable nanomaterials for further in vitro or in vivo experiments. In this work, we adopt a methodology using antibody fragments (Fab) conjugated to gold nanoparticles (immunogold) to map the available epitopes on a transferrin grafted silica particle (SiO-PEG-Tf) as a proxy methodology to predict nanoparticle biological function, and therefore cellular receptor engagement.

PEO-PPO-PEO/Poly(DL-lactide-co-caprolactone) Nanoparticles as Carriers for SN-38: Design, Optimization and Nano-Bio Interface Interactions.

Encapsulation of extremely hydrophobic substances such as SN-38 into nanoparticles, is a promising approach to solve the solubility issue and enable drug administration. Moreover, nanocarriers' tumor homing behavior, targeted and controlled release at the site of action will optimize therapeutic potency and decrease toxicity of the incorporated drug substance. However, the enormous drug hydrophobicity might limit the capacity for encapsulation as the premature drug precipitation will contribute to fast free drug crystal growth, low drug incorporation and huge waste of the active material.

Tuning of nanoparticle biological functionality through controlled surface chemistry and characterisation at the bioconjugated nanoparticle surface.

We have used a silica - PEG based bionanoconjugate synthetic scheme to study the subtle connection between cell receptor specific recognition and architecture of surface functionalization chemistry. Extensive physicochemical characterization of the grafted architecture is capable of capturing significant levels of detail of both the linker and grafted organization, allowing for improved reproducibility and ultimately insight into biological functionality. Our data suggest that scaffold details, propagating PEG layer architecture effects, determine not only the rate of uptake of conjugated nanoparticles into cells but also, more significantly, the specificity of pathways via which uptake occurs.

Controlling aqueous silica nanoparticle synthesis in the 10-100 nm range.

We describe the control of size and homogeneity in silica nanoparticle dispersions, prepared by a two-phase arginine catalysed aqueous method, through varying the upper organic solvent phase. The final particle dispersion characteristics can be controlled by varying features including solvent type and interfacial area, related to the rate of monomer transfer at the TEOS/water interface.

Transferrin-functionalized nanoparticles lose their targeting capabilities when a biomolecule corona adsorbs on the surface.

Nanoparticles have been proposed as carriers for drugs, genes and therapies to treat various diseases. Many strategies have been developed to target nanomaterials to specific or over-expressed receptors in diseased cells, and these typically involve functionalizing the surface of nanoparticles with proteins, antibodies or other biomolecules. Here, we show that the targeting ability of such functionalized nanoparticles may disappear when they are placed in a biological environment.

Stabilising fluorescent silica nanoparticles against dissolution effects for biological studies.

Here we show that commonly employed Stöber type fluorescently labelled silica nanoprobes degrade by hydrolytic dissolution, accelerated under biological media conditions as compared to water alone. We have thus developed a method to greatly improve their stability under such conditions.