How an organogelator can gelate water: gelation transfer from oil to water induced by a nanoemulsion.

A hydrogel can be formed by an organogelator in the presence of a nanoemulsion. It is expected that this is due to a gelation transfer from oil to water. The system started with an oil-in-water nanoemulsion prepared according to a phase inversion temperature (PIT) process.

In vitro and in vivo cardioprotective and metabolic efficacy of vitamin E TPGS/Apelin.

Aims: Apelin and vitamin E have been proposed as signaling molecules, but their synergistic role is unknown. The aim of this work was to develop vitamin E TPGS/Apelin system to test their cardioprotective and metabolic efficacy in vitro and in vivo.

Methods: FDA-approved surfactant D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS-1000) and Apelin complex were characterized by physico-chemical methods (CMC determination, dynamic light scattering and circular dichroism).

Molten fatty acid based microemulsions.

We show that ternary mixtures of water (polar phase), myristic acid (MA, apolar phase) and cetyltrimethylammonium bromide (CTAB, cationic surfactant) studied above the melting point of myristic acid allow the preparation of microemulsions without adding a salt or a co-surfactant. The combination of SANS, SAXS/WAXS, DSC, and phase diagram determination allows a complete characterization of the structures and interactions between components in the molten fatty acid based microemulsions. For the different structures characterized (microemulsion, lamellar or hexagonal phases), a similar thermal behaviour is observed for all ternary MA/CTAB/water monophasic samples and for binary MA/CTAB mixtures without water: crystalline myristic acid melts at 52 °C, and a thermal transition at 70 °C is assigned to the breaking of hydrogen bounds inside the mixed myristic acid/CTAB complex (being the surfactant film in the ternary system).

Histidine-Based Lipopeptides Enhance Cleavage of Nucleic Acids: Interactions with DNA and Hydrolytic Properties.

Interaction studies and cleavage activity experiments were carried out between plasmid DNA and a series of histidine-based lipopeptides. Specific fluorescent probes (ethidium bromide, Hoechst 33342, and pyrene) were used to monitor intercalation, minor groove binding, and self-assembly of lipopeptides, respectively. Association between DNA and lipopeptides was thus evidenced, highlighting the importance of both histidine and hydrophobic tail in the interaction process.

Quenched microemulsions: a new route to proton conductors.

Solid-state proton conductors operating under mild temperature conditions (T < 150 °C) would promote the use of electrochemical devices as fuel cells. Alternatives to the water-sensitive membranes made of perfluorinated sulfonated polymers require the use of protogenic moieties bearing phosphates/phosphonates or imidazole groups. Here, we formulate microemulsions using water, a cationic surfactant (cetyltrimethyl ammonium bromide, CTAB) and a fatty acid (myristic acid, MA).

Reverse aggregate nucleation induced by acids in liquid-liquid extraction processes.

We show in the case of N,N'-dimethyl-N,N'-dioctyl-2-(2(hexyloxy)ethyl)-malonamide (DMDOHEMA) chosen as a typical oil-soluble extractant with surface activity that the free energy of formation of reverse micelles in the solvent phase strongly depends on the presence of polar solutes. Free energies per molecule vary typically from 0 to 2 kT per molecule (5 kJ mol(-1)), depending on the kosmotropic/chaotropic nature of the anion extracted. Variations of the reverse aggregation free energy introduced by acids and other co-extracted solutes as deduced from the critical aggregation concentrations cannot be neglected while modelling extraction.

How do anions affect self-assembly and solubility of cetylpyridinium surfactants in water.

We report the specific effects of a series of anions (chloride, nitrate, and oxalate) on the solubility and self-assembly of cationic cetylpyridinium surfactants in water. The anion influence on micellization was evidenced by tensiometry and determination of Krafft temperatures. Anions strongly affect these parameters, depending on their position in the lyotropic series as well as on their "bridging" character.

Surfactin self-assembles into direct and reverse aggregates in equilibrium and performs selective metal cation extraction.

On tie-lines between water-rich and alkane-rich solutions, it is shown via scattering experiments that natural lipopeptide surfactin self-assembles into direct and reverse micelles in equilibrium. Elongated direct micelles in the aqueous phase are present together with small reverse globular aggregates in the organic phase. These latter are made from hydrated surfactant without any "water pool" in the organic phase.

Ion-specific weak adsorption of salts and water/octanol transfer free energy of a model amphiphilic hexapeptide.

An amphiphilic hexapeptide has been used as a model to quantify how specific ion effects induced by addition of four salts tune the hydrophilic/hydrophobic balance and induce temperature-dependant coacervate formation from aqueous solution. The hexapeptide chosen is present as a dimer with low transfer energy from water to octanol. Taking sodium chloride as the reference state in the Hofmeister scale, we identify water activity effects and therefore measure the free energy of transfer from water to octanol and separately the free energy associated to the adsorption of chaotropic ions or the desorption of kosmotropic ions for the same amphiphilic peptide.

Design of double stimuli-responsive polyelectrolyte microcontainers for protein soft encapsulation.

We have designed new double stimuli-responsive polyelectrolyte microcapsules to be useable under physiological conditions to handle biomacromolecules while avoiding the risk of denaturation. They are made of poly(4-vinylpyridine hydrochloride) (PVP) and poly(sodium styrene sulfonate) (PSS). The microcontainers are sensitive to temperature variation, as they irreversibly shrink under heating.

Soft X-ray microscopy to characterize polyelectrolyte assemblies.

Transmission microscopy with soft X-rays (TXM) is applied to image in-situ polyelectrolyte assemblies in aqueous environment. The method is element specific and at this stage exhibits a lateral resolution of 20 nm. With the specific examples of hollow capsules and full spheres made of PAH/PSS polyelectrolyte multilayers, it is shown quantitatively that heat treatment irreversibly reduces the water content in the membrane.

Behavior of temperature-sensitive PNIPAM confined in polyelectrolyte capsules.

Layer-by-layer assembled polyelectrolyte microcapsules are of great interest because they can possibly be used as microcontainers and they show interesting stimuli-responsive properties, which have been recently investigated. Here, we exploit capsules which are made temperature-sensitive by encapsulating poly(N-isopropylacrylamide) (PNIPAM). PNIPAM has a cloud point in water at about 32 degrees C, above which it collapses and is insoluble in water.

Balance of hydrophobic and electrostatic forces in the pH response of weak polyelectrolyte capsules.

A detailed study of the role of solution pH and ionic strength on the swelling behavior of capsules composed of the weak polyelectrolytes poly(4-vinylpyridine) (P4VP) and poly(methacrylic acid) (PMA) with different numbers of layers was carried out. The polyelectrolyte layers were assembled onto silicon oxide particles and multilayer formation was followed by zeta-potential measurements. Hollow capsules were investigated by scanning electron microscopy and atomic force microscopy.

Layer-by-layer coating of degradable microgels for pulsed drug delivery.

Recently, we reported on "self-rupturing" microcapsules which consist of a biodegradable dextran-based microgel surrounded by a polyelectrolyte membrane. Degradation of the microgel increases the swelling pressure in the microcapsules which, when sufficiently high, ruptures the surrounding polyelectrolyte membrane. The membrane surrounding the microgels is deposited using the layer-by-layer (LbL) technique, which is based on the alternate adsorption of oppositely charged polyelectrolytes onto a charged substrate.

Microcapsules made of weak polyelectrolytes: templating and stimuli-responsive properties.

Hollow microcapsules composed of the weak polyelectrolytes poly(allylamine hydrochloride) (PAH) and poly(methacrylic acid) (PMA) are templated on silicon oxide particles using the layer-by-layer adsorption. The colloidal template is removed with a buffer system of hydrofluoric acid and ammonium fluoride. With this buffer system, the template can be dissolved in mild pH conditions, where the polymeric layers are still stable.

Control of drug accessibility on functional polyelectrolyte multilayer films.

A surface coating based on polylysine/hyaluronic acid multilayers was designed and acted as a reservoir for an antiproliferative agent, paclitaxel (Taxol). Absolutely no chemical modification of polyelectrolytes or of the drug was needed and the final architecture was obtained in an extremely simple way using the layer-by-layer method. The paclitaxel dose available for human colonic adenocarcinoma cells HT29 seeded on the films could be finely tuned.

Entrapment of a weak polyanion and H+/Na+ exchange in confined polyelectrolyte microcapsules.

An approach for the entrapment of a polyanion by polyelectrolyte microcapsules is reported. It is based on a reversal changing of microcapsule wall permeability from neutral to basic pH. Polyelectrolyte microcapsules were templated on latex (polystyrene) particles by the layer-by-layer adsorption of oppositely charged polymers of sodium poly(styrene sulfonate) and poly(allylamine hydrochloride), followed by core removal using tetrahydrofuran.

The role of metal nanoparticles in remote release of encapsulated materials.

Laser mediated remote release of encapsulated fluorescently labeled polymers from nanoengineered polyelectrolyte multilayer capsules containing gold sulfide core/gold shell nanoparticles in their walls is observed in real time on a single capsule level. We have developed a method for measuring the temperature increase and have quantitatively investigated the influence of absorption, size, and surface density of metal nanoparticles using an analytical model. Experimental measurements and numerical simulations agree with the model.

pH-responsive properties of hollow polyelectrolyte microcapsules templated on various cores.

Hollow polyelectrolyte microcapsules made of poly(allylamine hydrochloride) and sodium poly(styrene sulfonate), templated on various cores, manganese and calcium carbonate particles or polystyrene latexes, were investigated. The polyelectrolyte multilayers respond to a change of pH, leading to a swelling of the capsules in basic conditions and a further shrinking when the pH is reduced to acidic. The nature of the core and the subsequent dissolution process have an influence on this pH responsiveness, and the structuring effect of tetrahydrofuran on the multilayers has been demonstrated.

Langmuir films of (alpha-amino) phosphorus amphiphiles on various ion-containing subphases.

Monolayers of amphiphilic (alpha-amino)phosphonocarboxylic and (alpha-amino)phosphonic acids have been formed by adsorption at the air/water interface. The influence of both the ionic strength and the pH of the subphase on the stability and compactness of the monolayers have been studied. The stability and the compactness of the Langmuir films are enhanced by introduction of metallic ions such as Ca(2+) or Mg(2+) in the subphases.

Asymmetric synthesis of (alpha-amino)phosphonic acid amphiphiles using chiral P-H spirophosphoranes.

Chiral P-H spirophosphoranes reacted with long-chain prochiral aldimines and, after selective hydrolysis, afforded (alpha-amino)phosphonic acid amphiphiles in both enantiopure forms.