Olfactory neurogenesis plays different parts at successive stages of life, implications for mental health.

The olfactory bulb is a unique site of continuous neurogenesis, primarily generating inhibitory interneurons, a process that begins at birth and extends through infancy and adulthood. This review examines the characteristics of olfactory bulb neurogenesis, focusing on granule cells, the most numerous interneurons, and how their age and maturation affect their function. Adult-born granule cells, while immature, contribute to the experience-dependent plasticity of the olfactory circuit by enabling structural and functional synaptic changes.

Complement Activation by Pulp Capping Materials Plays a Significant Role in Both Inflammatory and Pulp Stem Cells' Recruitment.

Introduction: The role of complement, especially through the C5a fragment, is well-known for the initiation of inflammation. Its involvement in regeneration has been shown more recently by the recruitment of mesenchymal stem cells. C5a can be produced locally by the pulp fibroblasts in response to injury or infection.

In vitro microleakage of Biodentine as a dentin substitute compared to Fuji II LC in cervical lining restorations.

Purpose: 1) To evaluate the marginal sealing efficacy of Biodentine at the cervical margins of approximal cavities placed in molars; 2) to evaluate and compare the use of Biodentine in combination with resin-based adhesives and a resin composite, compared with a resin-modified glass-ionomer cement (Fuji II LC).

Materials And Methods: Sixty approximal cavities were prepared on mesial and distal surfaces of 30 extracted human third molars. The teeth were randomly assigned into 6 groups of 10 cavities each: (G1) Biodentine, (G2) Fuji II LC as a filling material, (G3) Biodentine as a base + Optibond Solo Plus + silane + Filtek Z250, (G4) as in G3 without silane, (G5) Biodentine as a base + Septobond SE + Filtek Z250, (G6) Fuji II LC as a base + Optibond Solo Plus + Filtek Z250.

Effect of dual cure composite as dentin substitute on the marginal integrity of Class II open-sandwich restorations.

This study compared the marginal adaptation of Class II open-sandwich restorations with an RMGIC versus a dual-cure composite as dentin substitute. Class II cavities were prepared on 50 extracted human third molars. The teeth were randomly assigned to two groups of 25 teeth to compare one dual cure composite (Multicore Flow) with one resin-modified glass-ionomer cement (Fuji II LC) in open-sandwich restorations covered with a light cure composite.

Effect of dual cure composite as dentin substitute on marginal integrity of class II open-sandwich restorations.

The current study compared the marginal adaptation of Class II open-sandwich restorations with a RMGIC versus a dual-cure composite as dentin substitute. Class II cavities were prepared on 50 extracted human third molars. The teeth were randomly assigned to two groups of 25 teeth to compare one dual cure composite (MultiCore Flow) with one resin-modified glass-ionomer cement (Fuji II LC) in open-sandwich restorations recovered with a light cure composite.

Induction of specific cell responses to a Ca(3)SiO(5)-based posterior restorative material.

Objectives: A Ca(3)SiO(5)-based cement has been developed to circumvent the shortcomings of traditional filling materials. The purpose of this work was to evaluate its genotoxicity, cytotoxicity and effects on the target cells' specific functions.

Methods: Ames' test was applied on four Salmonella typhimurium strains.

Clinical evaluation of the marginal fit of cast crowns--validation of the silicone replica method.

Replication of the space between a tooth and its cast crown, using a light-body silicone supported by a heavy-body silicone, is a recognized technique to evaluate the quality of a restoration. This study validates a similar method that is of great clinical and experimental interest. Whatever the type of silicone used, comparison is possible between different technical procedures of crown elaboration (type of impression, type of material, method of spacing, etc.

Use of two surface analyzers to evaluate the surface roughness of four esthetic restorative materials after polishing.

This study had two aims: determine how well four esthetic restorative materials lent themselves to polishing and compare the results obtained using two different techniques for evaluating surface roughness. The four materials used were two composites modified by the addition of resin, Dyract AP (Dentsply) and Dyract Flow (Dentsply); one composite designed for posterior restorations, SureFil (Dentsply) and one universal micromatrix composite, Esthet-X (Dentsply). Five test pieces were made with each product by inserting the material into cylindrical molds and polymerizing it layer by layer.

Role of injured endothelial cells in the recruitment of human pulp cells.

In restorative dentistry, deep cavity preparation may lead to partial destruction of the odontoblastic layer. However, newly formed odontoblast-like cells can replace the necrotic odontoblasts and secrete a reparative dentine matrix. While growth factors such as transforming growth factor beta1 (TGFbeta1) and bone morphogenetic proteins (BMP-2 and BMP-4) seem to be involved in the proliferation and differentiation of pulp cells, little is known about the migration of the newly proliferating stem cells to the injury site.

Activation of human dental pulp progenitor/stem cells in response to odontoblast injury.

In restorative dentistry, whilst moderate carious lesion treatment does not significantly compromise odontoblast cell survival, deep cavity preparation may lead to a partial death of these cells. However, newly formed odontoblast-like cells can replace the necrotic odontoblasts and secrete a reparative dentine matrix. Although several lines of evidence strongly suggest the presence of resting progenitor or stem cells in the dental pulp, little is known about the activation and migration of these cells in response to injury.

Human biological reactions at the interface between bone tissue and polymethylmethacrylate cement.

This study investigated cytotoxicity of cement fragments harvested from two prosthesis revisions by the MTT test using L929 fibroblasts and human osteoblasts. The results did not show any toxicity of the extracts prepared after 48 and 78 months implantation. We consider that no MMA monomer has been released from the cement fragments.

Influence of the number of sections on reliability of in vitro microleakage evaluations.

Purpose: To test how the number of sections affects the maximum depth of tracer penetration.

Materials And Methods: This study was simultaneously performed in three different centers. C-shaped Class V cavities were made on 60 human third molars.

The biodegradation mechanism of calcium phosphate biomaterials in bone.

This study was undertaken to understand the biodegradation mechanisms of calcium phosphate (Ca-P) biomaterials with different crystallization. Two types of sintered Ca-P porous ceramic (HA and beta-TCP) and a Ca-P bone cement (CPC) were implanted into cavities drilled in rabbit femoral and tibiae condyles. The results have shown that a material biodegradation was rapid in the beta-TCP and the CPC, but very weak in the HA.

Reliability of in vitro microleakage tests: a literature review.

Purpose: The literature contains conflicting data about in vitro microleakage evaluations and their usefulness and reliability. No standardization has yet been established. Here we consider features of published studies that might affect the results of the in vitro microleakage tests.

In vitro assessment of polymerization procedures in Class II restorations: sealing, FTIR, and microhardness evaluations.

Purpose: This study was undertaken to evaluate several polymerization and filling procedures (incremental, bulk, light-tip, soft-cured, plasma devices) in Class II restorations through (1) a sealing evaluation of restorations filled with Tetric Ceram (TC) and Bisfil 2B (B2B, self-cured composite used as a control), (2) a FTIR analysis measuring the variations of the degree of conversion in terms of area unit ratio of the relevant resin composites and (3) a microhardness test to corroborate the FTIR analysis.

Materials And Methods: The length of the tracer penetration was measured from the gingival margin up to the cavity wall with an episcope on sectioned teeth. A ceramic mould, simulating a Class II, was filled according to the different groups and the samples were analyzed with a Bruker IFS 55 spectrometer on ultrathin sections (3 mu).

In vivo diagnostic assessment of dentinal caries by junior and senior students using red acid dye.

The aim of this study was firstly to determine and compare the ability of inexperienced junior dental students (Fourth-year) and senior students (Fifth-year) versus a dental school instructor to identify demineralized dentine with the aid of a caries-disclosing solution and secondly to evaluate an eventual improvement of the caries diagnosis accuracy of junior (Fourth-year) and senior (Fifth-year) dental students. Three successive stages were used to check the ability of the dental students to diagnose and excavate the de-mineralized dentine. This study pointed out that 96% of junior dental students versus a teacher failed to remove all of the demineralized dentine without the use of a caries detector at the first stage and 79% at the second stage in the same condition.

Factors influencing pulpal response to cavity restorations.

Objectives: The purposes of this retrospective work were: (1) to determine the relative importance of bacteria on cavity walls, remaining dentin thickness and post-operative time on pulpal inflammation after cavity restoration; (2) to compare the respective influences of bacterial microleakage and the restorative material itself on pulp reaction severity.

Methods: 317 class V cavities, in human bicuspids scheduled for extraction for orthodontic reasons were used for this study. Nine different materials were included.

Comparison of two implantation sites for testing intraosseous biocompatibility.

The purpose of this study was to compare two implantation sites--the mandible and the femur of the rabbit--for testing in vivo intraosseous biocompatility. Twenty-two new Zealand rabbits were anesthetized, and the mandibular and femur bones were exposed. A hybrid glass ionomer cement or zinc oxide eugenol cement was loaded into silicone carriers and inserted into the two bones after drilling the two cortical plates.

Effects of desensitizing agents on human dentin permeability.

Purpose: To compare the in vitro effects of three desensitizing agents on hydraulic conductance of human dentin: Protect (n = 10), Gluma Desensitizer (n = 10), MS Coat (n = 10) (Pain-Free in the USA).

Materials And Methods: Dentin discs were prepared from 40 freshly extracted normal human third molars. The pulpal side of the dentin discs was etched with 37% phosphoric acid for 15 s and then rinsed under tap water.

Histological and biomechanical studies of two bone colonizable cements in rabbits.

We have developed two colonizable bone cements: the first is a partially resorbable bisphenol-alpha-glycidyl methacrylate (Bis-GMA)-based cement (PRC) and the second is a calcium phosphate cement (CPC). PRC is composed of aluminous silanized ceramic and particles of a bioresorbable polymer embedded in a matrix of Bis-GMA. CPC consisted of tricalcium phosphate, monocalcium phosphate monohydrate, dicalcium phosphate dihydrate, and xanthane.

Low-energy He/Ne laser in the prevention of radiation-induced mucositis. A multicenter phase III randomized study in patients with head and neck cancer.

Use of the low-energy helium-neon laser (LEL) appears to be a simple atraumatic technique for the prevention and treatment of mucositis of various origins. Preliminary findings, and significant results obtained for chemotherapy-induced mucositis in a previous phase III study, prompted a randomized multicenter double-blind trial to evaluate LEL in the prevention of acute radiation-induced stomatitis. Irradiation by LEL corresponds to local application of a high-photon-density monochromatic light source.

Eugenol diffusion through dentin related to dentin hydraulic conductance.

Objectives: The purpose of this study was (1) to find an easy way of evaluating the concentration of eugenol in cell culture fluids; (2) to confirm the relationship between the concentration and the cytotoxicity of eugenol in vitro; (3) to evaluate the cytotoxicity of four temporary eugenol-based filling materials: IRM, super EBA, Kalsogen and zinc oxide-eugenol cement; and (4) to establish a relationship between dentin permeability, eugenol diffusion and cytotoxicity.

Methods: (1) The concentration of eugenol was measured with a spectrofluorimeter; (2) the cell viability of L 929 cells cultivated for 24 h with eugenol-containing medium was evaluated by the MTT assay; (3) after measurement of hydraulic conductance, occlusal cavities in human teeth in vitro were filled with the restorative materials. The cytotoxicity was measured with undiluted test medium and with various dilutions in culture medium; (4) after Lp measurement, the eugenol concentration in the media in the pulp chamber that diffused from IRM and 10(3) mol/l eugenol solution was measured.