344Laser bioprinting of human iPSC-derived neural stem cells and neurons: Effect on cell survival, multipotency, differentiation, and neuronal activity.

Generation of human neuronal networks by three-dimensional (3D) bioprinting is promising for drug testing and hopefully will allow for the understanding of cellular mechanisms in brain tissue. The application of neural cells derived from human induced-pluripotent stem cells (hiPSCs) is an obvious choice, since hiPSCs provide access to cells unlimited in number and cell types that could be generated by differentiation. The questions in this regard include which neuronal differentiation stage is optimal for printing of such networks, and to what extent the addition of other cell types, especially astrocytes, supports network formation.

Capillary-like Formations of Endothelial Cells in Defined Patterns Generated by Laser Bioprinting.

Bioprinting is seen as a promising technique for tissue engineering, with hopes of one day being able to produce whole organs. However, thick tissue requires a functional vascular network, which naturally contains vessels of various sizes, down to capillaries of ~10 µm in diameter, often spaced less than 200 µm apart. If such thick tissues are to be printed, the vasculature would likely need to be printed at the same time, including the capillaries.

Development of Human iPSC-Derived Functional Neuronal Networks on Laser-Fabricated 3D Scaffolds.

Neural progenitor cells generated from human induced pluripotent stem cells (hiPSCs) are the forefront of ″brain-on-chip″ investigations. Viable and functional hiPSC-derived neuronal networks are shaping powerful models for evaluating the normal and abnormal formation of cortical circuits, understanding the underlying disease mechanisms, and investigating the response to drugs. They therefore represent a desirable instrument for both the scientific community and the pharmacological industry.

Cell Type-Specific Adhesion and Migration on Laser-Structured Opaque Surfaces.

Cytocompatibility is essential for implant approval. However, initial in vitro screenings mainly include the quantity of adherent immortalized cells and cytotoxicity. Other vital parameters, such as cell migration and an in-depth understanding of the interaction between native tissue cells and implant surfaces, are rarely considered.

Human stem cell based corneal tissue mimicking structures using laser-assisted 3D bioprinting and functional bioinks.

There is a high demand for developing methods to produce more native-like 3D corneal structures. In the present study, we produced 3D cornea-mimicking tissues using human stem cells and laser-assisted bioprinting (LaBP). Human embryonic stem cell derived limbal epithelial stem cells (hESC-LESC) were used as a cell source for printing epithelium-mimicking structures, whereas human adipose tissue derived stem cells (hASCs) were used for constructing layered stroma-mimicking structures.

Laser bioprinting of human induced pluripotent stem cells-the effect of printing and biomaterials on cell survival, pluripotency, and differentiation.

Research on human induced pluripotent stem cells (hiPSCs) is one of the fastest growing fields in biomedicine. Generated from patient's own somatic cells, hiPSCs can be differentiated towards all functional cell types and returned to the patient without immunological concerns. 3D printing of hiPSCs could enable the generation of functional organs for replacement therapies or realization of organ-on-chip systems for individualized medicine.

Surface micromorphology of cross-linked tetrafunctional polylactide scaffolds inducing vessel growth and bone formation.

In the presented study, we have developed a synthetic strategy allowing a gradual variation of a polylactide arms' length, which later influences the micromorphology of the scaffold surface, formed by a two-photon polymerization technique. It has been demonstrated that the highest number of cells is present on the scaffolds with the roughest surface made of the polylactide with longer arms (PLA760), and osteogenic differentiation of mesenchymal stem cells is most pronounced on such scaffolds. According to the results of biological testing, the PLA760 scaffolds were implanted into a created cranial defect in a mouse for an in vivo assessment of the bone tissue formation.

Laser-assisted bioprinting at different wavelengths and pulse durations with a metal dynamic release layer: A parametric study.

For more than a decade, living cells and biomaterials (typically hydrogels) are printed via laser-assisted bioprinting. Often, a thin metal layer is applied as laser-absorbing material called dynamic release layer (DRL). This layer is vaporized by focused laser pulses generating vapor pressure that propels forward a coated biomaterial.

Correlation between ECM guidance and actin polymerization on osteogenic differentiation of human adipose-derived stem cells.

The correlation between extracellular matrix (ECM) components, cell shape, and stem cell guidance can shed light in understanding and mimicking the functionality of stem cell niches for various applications. This interplay on osteogenic guidance of human adipose-derived stem cells (hASCs) was focus of this study. Proliferation and osteogenic markers like alkaline phosphatase activity and calcium mineralization were slightly increased by the ECM components laminin (LA), collagen I (COL), and fibronectin (FIB); with control medium no differentiation occurred.

Novel biodegradable star-shaped polylactide scaffolds for bone regeneration fabricated by two-photon polymerization.

Aim: To assess the properties of 3D biodegradable scaffolds fabricated from novel star-shaped poly(D,L-lactide) (SSL) materials for bone tissue regeneration.

Materials & Methods: The SSL polymer was synthesized using an optimized synthetic procedure and applied for scaffold fabrication by the two-photon polymerization technique. The osteogenic differentiation was controlled using human adipose-derived stem cells cultured for 28 days.

EVALUATION OF VASCULOGENIC POTENTIAL OF MODIFIED FIBRIN HYDROGEL.

In recent years, engineering of blood vessels, which can provide the effective transport of nutrients and various metabolites, is one of the major challenges in tissue reconstruction. Many researches are carried out to develop cell-seeded bioconstructs based on natural polymers, particularly on PEGylated fibrin. Therefore, the aim of this study was to reveal the optimal component ratio for modified fibrin hydrogels in order to provide favorable conditions for vascular development of endothelial and mesenchymal stem cell co-culture.

Osteogenic differentiation of human mesenchymal stem cells in 3-D Zr-Si organic-inorganic scaffolds produced by two-photon polymerization technique.

Two-photon polymerization (2PP) is applied for the fabrication of 3-D Zr-Si scaffolds for bone tissue engineering. Zr-Si scaffolds with 150, 200, and 250 μm pore sizes are seeded with human bone marrow stem cells (hBMSCs) and human adipose tissue derived stem cells (hASCs) and cultured in osteoinductive and control media for three weeks. Osteogenic differentiation of hASCs and hBMSCs and formation of bone matrix is comparatively analyzed via alkaline phosphatase activity (ALP), calcium quantification, osteocalcin staining and scanning electron microscopy (SEM).

Impact of laser-structured biomaterial interfaces on guided cell responses.

To achieve a perfect integration of biomaterials into the body, tissue formation in contact with the interface has to be controlled. In this connection, a selective cell control is required: fibrotic encapsulation has to be inhibited, while tissue guidance has to be stimulated. As conventional biomaterials do not fulfil this specification, functionalization of the biointerface is under development to mimic the natural environment of the cells.

Tissue engineered skin substitutes created by laser-assisted bioprinting form skin-like structures in the dorsal skin fold chamber in mice.

Tissue engineering plays an important role in the production of skin equivalents for the therapy of chronic and especially burn wounds. Actually, there exists no (cellularized) skin equivalent which might be able to satisfactorily mimic native skin. Here, we utilized a laser-assisted bioprinting (LaBP) technique to create a fully cellularized skin substitute.

Topography and coating of platinum improve the electrochemical properties and neuronal guidance.

To improve neuronal-electrode interfaces, we analyzed the influence of surface topographies combined with coating on the electrochemistry of platinum and neuronal differentiation of PC-12 cells. Surface structuring on nanoscale was realized by femtosecond laser ablation. Additional coating with laminin (LA), collagen type I (COL) or poly-d-lysine (PDL) did not change the produced topography.

Skin tissue generation by laser cell printing.

For the aim of ex vivo engineering of functional tissue substitutes, Laser-assisted BioPrinting (LaBP) is under investigation for the arrangement of living cells in predefined patterns. So far three-dimensional (3D) arrangements of single or two-dimensional (2D) patterning of different cell types have been presented. It has been shown that cells are not harmed by the printing procedure.

Fabrication of fibrin scaffolds with controlled microscale architecture by a two-photon polymerization-micromolding technique.

Fabrication of three-dimensional (3D) fibrin scaffolds with tightly controllable pore sizes and interconnections has been investigated. The scaffolds were produced using a combination of two-photon polymerization (2PP) and micromolding techniques. Master structures were fabricated by 2PP and regenerated in fibrin by a two-step microreplication procedure.

Proteomic analysis to display the effect of low doses of erythropoietin on rat liver regeneration.

Aims: Several groups found different impact of erythropoietin (EPO) on liver regeneration. Both pro-proliferative as well as anti-proliferative and non-proliferative activities have been reported using high dosage of EPO. Systemic administration of high doses of this cytokine is a clinical concern due to risk of thrombosis.

Laser printing of three-dimensional multicellular arrays for studies of cell-cell and cell-environment interactions.

Utilization of living cells for therapies in regenerative medicine requires a fundamental understanding of the interactions between different cells and their environment. Moreover, common models based on adherent two-dimensional cultures are not appropriate to simulate the complex interactions that occur in a three-dimensional (3D) cell-microenvironment in vivo. In this study, we present a computer-aided method for the printing of multiple cell types in a 3D array using laser-assisted bioprinting.

Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting.

Background: Laser-assisted bioprinting of multi-cellular replicates in accordance with CAD blueprint may substantially improve our understandings of fundamental aspects of 3 D cell-cell and cell-matrix interactions in vitro. For predictable printing results, a profound knowledge about effects of different processing parameters is essential for realisation of 3 D cell models with well-defined cell densities.

Methods: Time-resolved imaging of the hydrogel jet dynamics and quantitative assessment of the dependence of printed droplet diameter on the process characteristics were conducted.

Laser fabrication of three-dimensional CAD scaffolds from photosensitive gelatin for applications in tissue engineering.

In the present work, 3D CAD scaffolds for tissue engineering applications were developed starting from methacrylamide-modified gelatin (GelMOD) using two-photon polymerization (2PP). The scaffolds were cross-linked employing the biocompatible photoinitiator Irgacure 2959. Because gelatin is derived from collagen (i.

Adipogenic differentiation of laser-printed 3D tissue grafts consisting of human adipose-derived stem cells.

Laser-assisted bioprinting (LaBP) allows the realization of computer-generated 3D tissue grafts consisting of cells embedded in a hydrogel environment. In this study, human adipose-derived stem cells (hASCs) were printed in a free-scalable 3D grid pattern by means of LaBP. We demonstrate that neither the proliferation ability nor the differentiation behaviour of the stem cells was affected by the LaBP procedure.

Laser Fabrication of 3D Gelatin Scaffolds for the Generation of Bioartificial Tissues.

In the present work, the two-photon polymerization (2PP) technique was applied to develop precisely defined biodegradable 3D tissue engineering scaffolds. The scaffolds were fabricated via photopolymerization of gelatin modified with methacrylamide moieties. The results indicate that the gelatin derivative (GelMod) preserves its enzymatic degradation capability after photopolymerization.

Laser printing of stem cells for biofabrication of scaffold-free autologous grafts.

Stem cells are of widespread interest in regenerative medicine due to their capability of self-renewal and differentiation, which is regulated by their three-dimensional microenvironment. In this study, a computer-aided biofabrication technique based on laser-induced forward transfer (LIFT) is used to generate grafts consisting of mesenchymal stem cells (MSCs). We demonstrate that (i) laser printing does not cause any cell damage; (ii) laser-printed MSC grafts can be differentiated toward bone and cartilage; (iii) LIFT allows printing of cell densities high enough for the promotion of chondrogenesis; (iv) with LIFT three-dimensional scaffold-free autologous tissue grafts can be fabricated keeping their predefined structure, and (v) predifferentiated MSCs survived the complete printing procedure and kept their functionality.

The influence of oxygen supply on metabolism of neural cells cultured on a gas-permeable PTFE foil.

The influence of oxygen on neural stem cell proliferation, differentiation, and apoptosis is of great interest for regenerative therapies in neurodegenerative disorders, such as Parkinson's disease. These oxygen depending mechanisms have to been considered for the optimization of neural cell culture conditions. In this study, we used a cell culture system with an oxygen-permeable polytetrafluorethylene (PTFE) foil to investigate the effect of oxygen on metabolism and survival of neural cell lines in vitro.