Gray values and noise behavior of cone-beam computed tomography machines-an in vitro study.

Objectives: To systematically evaluate the mean gray values (MGV) and noise provided by bone and soft tissue equivalent materials and air imaged with varied acquisition parameters in nine cone-beam computed tomography (CBCT) machines.

Methods: The DIN6868-161 phantom, composed of bone and soft tissue equivalent material and air gap, was scanned in nine CBCT machines. Tube current (mA) and tube voltage (kV), field of view (FOV) size, and rotation angle were varied over the possible range.

Combining different metal artifact reduction levels with sharpening filters and slice thickness for the visualization of mandibular canals perforated by implants.

Objectives: To investigate the influence of combining levels of metal artifact reduction (MAR) tool with different filters and slice-thickness in the detection of mandibular canals perforated by implants on CBCT scans and to objectively assess the impact of the aforementioned combinations.

Materials And Methods: Implants were placed above (8 implants) and inside (10 implants) mandibular canals of dried-mandibles. CBCT scans were obtained with the Eagle 3D unit (85 kVp, 8 mA, 5 × 5 cm FOV, 130 μm voxel size, and off/medium/high MAR levels).

Combination of metal artifact reduction and sharpening filter application for horizontal root fracture diagnosis in teeth adjacent to a zirconia implant.

Purpose: This study examined the influence of metal artifact reduction (MAR), the application of sharpening filters, and their combination on the diagnosis of horizontal root fracture (HRF) in teeth adjacent to a zirconia implant on cone-beam computed tomography (CBCT) examinations.

Materials And Methods: Nineteen single-rooted teeth (9 with HRF and 10 without) were individually positioned in the right central incisor socket of a dry human maxilla. A zirconia implant was placed adjacent to each tooth.

Evaluation of gingival thickness obtained from intraoral scanning registration with cone beam computed tomography at different acquisition modes.

Objectives: To investigate the reliability of gingival thickness measurements obtained from the registration of intraoral scans with cone beam computed tomography (CBCT) examinations at different acquisition modes.

Study Design: CBCT examinations of 9 porcine hemimandibles were acquired using the OP300 Maxio unit operating at the highest-dose protocol with the smallest voxel size as the reference standard for visualizing the gingival surface. Subsequently, the hemimandibles were surrounded by water to simulate soft tissue attenuation of radiation, and additional CBCT examinations were acquired in 4 modes: Endo, High-resolution, Standard-resolution, and Low-dose.

Influence of the digital file format on radiographic diagnostic in dentistry: a scoping review.

Given today's higher demand for online transmission of radiographic images, clinicians and regulatory agencies should be given the evidence they need to guide them in choosing the best image file format to be adopted. To this end, the present scoping review aims to explore, map, and evaluate the literature, with the object of reporting the influence of image file formats on dental diagnostic tasks by assessing intraoral radiographic images. This scoping review complies with PRISMA-ScR.

Peracetic acid efficacy on disinfection of photostimulable phosphor plates.

Objectives: To evaluate the antimicrobial efficacy of white vinegar, acetic acid, and peracetic acid on photostimulable phosphor (PSP) plates disinfection, and to assess the disinfectant influence on the radiographic quality.

Methods: Eight PSP plates (Express system) were contaminated with Streptococcus mutans and Candida albicans. These plates were wiped with tissues without any substance, with white vinegar, acetic acid, and peracetic acid, followed by an agar imprint.

Do the number of zirconia implants and the thickness of CBCT image reconstruction affect the detection of peri-implant bone defect? A diagnostic accuracy ex vivo study.

Objectives: To evaluate the influence of multiplanar reconstruction thickness on the detection of peri-implant bone defects with a standalone zirconia implant and compare it to when another implant is in the vicinity using cone-beam computed tomography (CBCT).

Materials And Methods: Five dry human mandibles were used to create twenty implant sites in the second premolar and first molar regions. The OP300 Maxio was used to acquire CBCT images (90 kVp, 6.

Impact of the spatial orientation of the patient's head, metal artifact reduction, and tube current on cone-beam computed tomography artifact expression adjacent to a dental implant: A laboratory study using a simulated surgical guide.

Purpose: The aim of this study was to evaluate image artifacts in the vicinity of dental implants in cone-beam computed tomography (CBCT) scans obtained with different spatial orientations, tube current levels, and metal artifact reduction algorithm (MAR) conditions.

Materials And Methods: One dental implant and 2 tubes filled with a radiopaque solution were placed in the posterior region of a mandible using a surgical guide to ensure parallel alignment. CBCT scans were acquired with the mandible in 2 spatial orientations in relation to the X-ray projection plane (standard and modified) at 3 tube current levels: 5, 8, and 11 mA.

Optimizing cone-beam computed tomography exposure for an effective radiation dose and image quality balance.

Purpose: The aim of this study was to evaluate the influence of different cone-beam computed tomography (CBCT) acquisition protocols on reducing the effective radiation dose while maintaining image quality.

Materials And Methods: The effective dose emitted by a CBCT device was calculated using thermoluminescent dosimeters placed in a Rando Alderson phantom. Image quality was assessed by 3 experienced evaluators.

Vertical root fracture diagnosis in teeth with metallic posts: Impact of metal artifact reduction and sharpening filters.

Purpose: This study examined the influence of a metal artifact reduction (MAR) tool, sharpening filters, and their combination on the diagnosis of vertical root fracture (VRF) in teeth with metallic posts using cone-beam computed tomography (CBCT).

Materials And Methods: Twenty single-rooted human premolars - 9 with VRF and 11 without - were individually placed in a human mandible. A metallic post composed of a cobalt-chromium alloy was inserted into the root canal of each tooth.

Is there a relationship between the presence of external root resorption in second molars adjacent to impacted mandibular third molars with awake bruxism and masticatory muscle activity?

Objectives: This study aimed to assess whether awake bruxism and masticatory muscle activity could be related to external root resorption (ERR) in second molars adjacent to impacted mandibular third molars.

Materials And Methods: Sixty patients, with requests for a cone-beam, computed tomography, were divided into two groups: ERR (patients with ERR in the second molar, n = 30), and control group (n = 30). Awake bruxism was assessed through the Oral Behaviors Checklist (OBC) and an ecological momentary assessment (EMA).

Influence of tube current and metal artifact reduction on the diagnosis of external cervical resorption in teeth adjacent to a dental implant in CBCT: an ex-vivo study.

Objectives: This ex-vivo study aimed to assess the influence of tube current (mA) and metal artifact reduction (MAR) on the diagnosis of early external cervical resorption (EECR) in cone-beam computed tomography (CBCT) in the presence of an adjacent dental implant.

Materials And Methods: Twenty-three single-rooted teeth were sectioned longitudinally and EECR was induced using a spherical drill and 5% nitric acid in 10 teeth. Each tooth was positioned in the socket of the lower right canine of a dry human mandible and CBCT scans were acquired using 90 kVp, voxel of 0.

Potential impact of metal crowns at varying distances from a carious lesion on its detection on cone-beam computed tomography scans with several protocols.

Purpose: This study evaluated the impact of artifacts generated by metal crowns on the detection of proximal caries lesions in teeth at various distances using cone-beam computed tomography (CBCT). Additionally, the diagnostic impacts of tube current and metal artifact reduction (MAR) were investigated.

Materials And Methods: Thirty teeth were arranged within 10 phantoms, each containing 1 first premolar, 1 second premolar, and 1 second molar.

Assessment of accuracy and reproducibility of cephalometric identification performed by 2 artificial intelligence-driven tracing applications and human examiners.

Objective: To assess the accuracy and reproducibility of cephalometric landmark identification performed by 2 artificial intelligence (AI)-driven applications (CefBot and WebCeph) and human examiners.

Study Design: Lateral cephalometric radiographs of 10 skulls containing 0.5 mm lead spheres directly placed at 10 cephalometric landmarks were obtained as the reference standard.

Metaverse and oral and maxillofacial radiology: Where do they meet?

Since previous literatureregarding the application of the metaverse in educationis scarce, the present letter aimed to highlight possible applications, as a complementary tool for the classroom, in the oral and maxillofacial radiology academic experience.Thepotential risksof the metaverse are also discussed. The metaverse and its possible applications, especially related to enhanced teaching and learning, will become a hot topic in the near future, and therefore, there will be a challenging learning curve before the educator makes the most of these innovative educational tools empowered by deeply interactive virtual reality technology.

The effect of voxel and field of view size on the volumetric alteration artifact of high-density materials with 2 cone beam computed tomography devices.

Objective: We investigated the influence of voxel and field of view (FOV) sizes on expression of the volumetric alteration artifact (VAA) of 5 high-density materials in 2 cone beam computed tomography (CBCT) devices.

Study Design: Cylinders of amalgam, cobalt-chromium, gutta-percha, titanium, and zirconium were individually positioned in a polymethyl methacrylate phantom. OP300 Maxio and ProMax 3D Classic CBCT devices were used to acquire images with varying voxel and FOV sizes, totaling 585 scans.

Do voxel size and filter application on CBCT images improve the diagnosis of condylar morphological alterations? An ex vivo study.

Background: There is no established protocol for the low doses of cone-beam computed tomography (CBCT) acquisition and filter application on the diagnosis of condylar morphological alterations.

Objectives: The objective of the study was to evaluate the influence of voxel size and filter application on the diagnosis of condylar morphological alterations in CBCT using an ex vivo model.

Methods: CBCT scans of 36 temporomandibular joints were acquired using OP300 Maxio with voxel sizes of 0.

Influence of an adjacent zirconium implant, tube current, and metal artifact reduction algorithm on horizontal root fracture diagnosis in cone beam computed tomography.

Objective: We evaluated the influence of an adjacent zirconium implant, tube current (mA), and a metal artifact reduction algorithm (MARA) on horizontal root fracture (HRF) diagnosis in cone beam computed tomography (CBCT).

Study Design: Nineteen teeth (9 with HRF, 10 without) were individually placed in a human maxilla. Scan volumes were acquired without and with a zirconium implant adjacent to the tooth at settings of 4, 8, and 10 mA, with MARA disabled and enabled, using a 5×5 cm field of view, 0.

DICOM file format has better radiographic image quality than other file formats: an objective study.

This study aimed to assess the influence of the file format on the image quality parameters (image noise, brightness, and uniformity) of periapical radiographs acquired with different digital systems. Radiographic images of an acrylic phantom were acquired with two digital systems - Digora Toto and Express, and exported into five different file formats - TIFF, BMP, DICOM, PNG, and JPEG. Image noise, image brightness (mean of gray values), and image uniformity (standard deviation of gray values) were evaluated in all images.

Mapping artifacts generated in a tooth adjacent to titanium and zirconia implants located in the endomass and exomass in cone beam computed tomography: an ex vivo study.

Objective: We evaluated artifact expression in a root adjacent to a dental implant located in the endomass or exomass in cone beam computed tomography (CBCT).

Study Design: We placed a single titanium or zirconia implant adjacent to a premolar root in a dried human mandible and acquired CBCT scans using an OP300 Maxio and a Picasso Trio 3D unit exposing a 5x5cm field of view with the implant in the endomass or exomass (implant groups) or without an implant (control group). We measured the mean gray values (MGVs) for 8 lines of interest (LOIs) around the root canal of the premolar and compared the MGVs by analysis of variance, with significance established at P < 0.

Radiographic evaluation of mandibular third molars: an ex vivo comparative study between multilayer and conventional panoramic radiography.

Objectives: To compare the multilayer panoramic radiography (MPAN) and conventional panoramic radiography (CPAN) in the evaluation of mandibular third molars using cone-beam computed tomography (CBCT) as a reference.

Methods: CPAN, MPAN, and CBCT scans from 33 dry human mandibles were acquired using the OP300 Maxio unit, totalizing 56 mandibular third molars to be evaluated. Three examiners evaluated each third molar according to their position, depth of impaction in the mandibular ramus, proximity between the dental root apexes and the mandibular canal, and the presence of radiographic signs of proximity to the mandibular canal.

Does the shape of the field-of-view influence the magnitude of artefacts from high-density materials in cone-beam computed tomography?

Objective: To compare cylindrical and convex triangular field-of-views (FOVs) concerning the magnitude of artefacts from high-density materials in cone-beam CT (CBCT).

Methods And Materials: Cylinders of amalgam, chromium-cobalt, titanium, and zirconia were individually placed in the anterior and posterior regions of a polymethylmethacrylate phantom and scanned using cylindrical and convex triangular FOVs of the Veraview X800 CBCT device. Using the Image J software, 15 square regions of interest (ROIs) were placed in the axial reconstruction around the middle level of the cylinder and at distances of 0.