Deformability considerations in filtration of biological cells.

Biological cells are highly sensitive to variation in local pressure because cellular membranes are not rigid. Unlike microbeads, cells deform under pressure or even lyse. In isolating or enriching cells by mechanical filtration, pressure-induced lysis is exacerbated when high local fluidic velocity is present or when a filter reaches its intended capacity.

Microfabricating high-aspect-ratio structures in polyurethane-methacrylate (PUMA) disposable microfluidic devices.

We recently reported a new UV-curable polyurethane-methacrylate (PUMA) resin that has excellent qualities as a disposable microfluidic substrate for clinical diagnostic applications. This article discusses strategies to improve the production yield of PUMA chips that contain dense and high-aspect-ratio features, which presents unique challenges in demolding and bonding steps. These fabrication improvements were deployed to produce a microfiltration device that contained closely spaced and high-aspect-ratio columns, suitable for retaining and concentrating cells or beads from a highly diluted suspension.

A new USP Class VI-compliant substrate for manufacturing disposable microfluidic devices.

As microfluidic systems transition from research tools to disposable clinical-diagnostic devices, new substrate materials are needed to meet both the regulatory requirement as well as the economics of disposable devices. This paper introduces a UV-curable polyurethane-methacrylate (PUMA) substrate that has been qualified for medical use and meets all of the challenges of manufacturing microfluidic devices. PUMA is optically transparent, biocompatible, and exhibits high electroosmotic mobility without surface modification.

Compartmentalization of chemically separated components into droplets.

Not merely a drop in the ocean: The integration of capillary electrophoresis (CE) with droplet generation driven by electroosmotic flow enabled the compartimentalization of molecular components separated by CE in a series of droplets (see picture; the green bars represent the separated analytes). The droplet-confined bands can be docked and studied on a chip.

Simultaneous generation of multiple aqueous droplets in a microfluidic device.

This paper describes a microfluidic platform for the on-demand generation of multiple aqueous droplets, with varying chemical contents or chemical concentrations, for use in droplet based experiments. This generation technique was developed as a complement to existing techniques of continuous-flow (streaming) and discrete-droplet generation by enabling the formation of multiple discrete droplets simultaneously. Here sets of droplets with varying chemical contents can be generated without running the risk of cross-contamination due to the isolated nature of each supply inlet.

Fast initiation of chemical reactions with laser-induced breakdown of a nanoscale partition.

This letter describes a new strategy for initiating a chemical reaction that is based on the laser-induced breakdown of a nanoscopic barrier, which physically separates the reactants in space. Because the breakdown of the barrier is fast ( approximately 0.3 micros) and owing to the nanometer dimension of the barrier, the reactants can be brought together and the reaction can be initiated rapidly.

Fabrication of thermoset polyester microfluidic devices and embossing masters using rapid prototyped polydimethylsiloxane molds.

Plastics are increasingly being used for the fabrication of Lab-on-a-Chip devices due to the variety of beneficial material properties, affordable cost, and straightforward fabrication methods available from a range of different types of plastics. Rapid prototyping of polydimethylsiloxane (PDMS) devices has become a well-known process for the quick and easy fabrication of microfluidic devices in the research laboratory; however, PDMS is not always an appropriate material for every application. This paper describes the fabrication of thermoset polyester microfluidic devices and masters for hot embossing using replica molding techniques.

Parametric investigation on the effect of channel topologies on electrophoretic separations.

This paper presents a systematic study that illustrates the importance of the topologies of microchannels on electrokinetically based separation. Using theoretical and numerical analyses, we designed and showed that topologies that significantly increased the surface-to-volume ratio of the channel can provide dramatic improvement in the ability of the channel both to dissipate the heat generated by Joule heating and to reduce the axial dispersion associated with the siphoning effect. The incremental benefit and tradeoff of geometric complexity was also evaluated.

Microfluidic systems: high radial acceleration in microvortices.

Microfluidic systems can conveniently be used for rapid analysis of biological samples. Here we describe a single re-circulating flow, or microvortex, that can generate a maximum fluid rotational velocity of up to 12 m s(-1) and a corresponding radial acceleration in excess of 10(6)g. Such microvortices may be exploited in centrifugal microdevices to investigate the effects of high radial acceleration on biological and chemical processes.