The Oriental hornet, Linnaeus, 1771 (Hymenoptera, Vespidae): diagnosis, potential distribution, and geometric morphometrics across its natural distribution range.

We present a short review of the biology, diagnostic characteristics, and invasiveness of the Oriental hornet, . We also performed an analysis of the shape of the forewings (geometric morphometrics) of different geographic groups along their native distribution and their potential geographical distribution using the MaxEnt entropy modeling. Our results show a wide potential expansion range of the species, including an increase in environmentally suitable areas in Europe, Asia, and Africa but more especially the Western Hemisphere, where the species was recently introduced.

Temporal lobe evolution in Hominidae and the origin of human lobe proportions.

Objectives Evolutionary changes in hominin social complexity have been associated with increases in absolute brain size. The temporal lobes are nestled in the middle cranial fossae (MCF) of the skull, the dimensions of which allow estimation of temporal lobe volume (TLV) in extant and fossil taxa. Materials and Methods The main aim of this study is to determine where along the hominid phylogeny, major temporal lobe size transitions occurred.

A retrospective cohort review of BMI on SI joint fusion outcomes: examining the evidence to improve insurance guidelines.

Purpose: The demand for SIJ fusion among obese patients has grown substantially. However, the clinical relevance of obesity in the context of SI joint fusion has not been well investigated specifically, whether there is a BMI cutoff above which the benefit-risk ratio is low.

Methods: Adult patients ≥ 21 years of age who underwent minimally invasive SIJ fusion between 2020 and 2023.

Removal of infected bone in-growth pelvic fixation implants and microcomputed tomography analysis of osseous integration: illustrative case.

Background: A novel pelvic fixation screw fusion device (iFuse Bedrock Granite implant) was designed to promote bony fusion through self-harvesting fenestrations throughout the outer screw shank. Bone on-growth and in-growth using this design have been demonstrated in a sheep model, but data from human subjects have not been reported. A 66-year-old medically complex female with 2 prior spine fusions developed spondylodiscitis cephalad to a prior fusion, requiring the removal of instrumentation, which included screw fusion devices.

Standing versus supine pelvic incidence in adult spinal deformity patients.

Purpose: Pelvic incidence (PI) is commonly used to determine sagittal alignment. Historically, PI was believed to be a fixed anatomic parameter. However, recent studies have suggested that there is positionally-dependent motion that occurs through the sacroiliac joint (SIJ) resulting in changes in PI.

Sacropelvic Fixation with Porous Fusion/Fixation Screws: A Technical Note and Retrospective Review.

Objective: The goal of this study was to analyze our initial experience using a novel porous fusion/fixation screw (PFFS) for pelvic fixation and determine our rate of screw malposition requiring intraoperative repositioning.

Methods: We reviewed 83 consecutive patients who underwent sacropelvic fixation with PFFS at our institution from June 1, 2022 to June 30, 2023 using intraoperative computed tomography-based computer-assisted navigation via an open posterior approach. Following PFFS insertion, intraoperative computed tomography scans were obtained to assess screw positioning.

Development of Consensus-Based Best Practice Guidelines for the Perioperative and Postoperative Care of Pediatric Patients With Spinal Deformity and Programmable Implanted Devices.

Study Design: Modified Delphi consensus study.

Objective: To develop consensus-based best practices for the care of pediatric patients who have implanted programmable devices (IPDs) and require spinal deformity surgery.

Summary Of Background Data: Implanted programmable devices (IPDs) are often present in patients with neuromuscular or syndromic scoliosis who require spine surgery.

Opioid Use Prior to Adult Spine Deformity Correction Surgery is Associated With Worse Pre- and Postoperative Back Pain and Prolonged Opioid Demands.

Study Design: Prospective multicenter database post-hoc analysis.

Objectives: Opioids are frequently prescribed for painful spinal conditions to provide pain relief and to allow for functional improvement, both before and after spine surgery. Amidst a current opioid epidemic, it is important for providers to understand the impact of opioid use and its relationship with patient-reported outcomes.

Challenges and advances in measuring phenotypic convergence.

Tests of phenotypic convergence can provide evidence of adaptive evolution, and the popularity of such studies has grown in recent years due to the development of novel, quantitative methods for identifying and measuring convergence. These methods include the commonly applied C1-C4 measures of Stayton (2015a), which measure morphological distances between lineages, and Ornstein-Uhlenbeck (OU) model-fitting analyses, which test whether lineages converged on shared adaptive peaks. We test the performance of C-measures and other convergence measures under various evolutionary scenarios and reveal a critical issue with C-measures: they often misidentify divergent lineages as convergent.

The Sacroiliac Joint Fusion Patient Population and Its Prevalence of Total Hip Arthroplasty.

Introduction: The prevalence of sacroiliac joint (SIJ) pathology generating lower back pain is increasing, often requiring SI joint fusion in refractory cases. Similarly, total hip arthroplasty (THA) is an increasing procedure in the older growing population. Prior SIJ fusion in patients undergoing THA has increased hip dislocation.

Spinopelvic fixation failure in the adult spinal deformity population: systematic review and meta-analysis.

Introduction: Despite modern fixation techniques, spinopelvic fixation failure (SPFF) after adult spinal deformity (ASD) surgery ranges from 4.5 to 38.0%, with approximately 50% requiring reoperation.

Prevalence of total joint arthroplasty in the adult spine deformity population.

Purpose: The spine, hip, and knee are anatomically and biomechanically connected. Total hip arthroplasty (THA) and total knee arthroplasty (TKA) are commonly employed to treat degenerative changes in the hip and knee, while fusion is used for spine degeneration. Spine deformity correction results in changes in sagittal alignment and pelvic parameters, and patients with stiff spines have higher rates of THA dislocation and revision due to instability.

Pelvic Fixation Construct Trends in Spinal Deformity Surgery.

Purpose: Although many techniques exist, spinopelvic fixation continues to present challenges in the management of adult spinal deformity. Shear forces, complex anatomy, and bone quality are common reasons why spine surgeons continue to explore options for fixation.

Methods: A retrospective chart reviewed of patients receiving pelvic fixation for adult spinal deformity over a 12-year period was conducted.

Measuring mantled howler monkey (Alouatta palliata) testes via parallel laser photogrammetry: Expanding the use of noninvasive methods.

Parallel laser photogrammetry (PLP), which consists of attaching two or three parallel laser beams at a known inter-beam distance to a camera, can be used to collect morphological measurements of organisms noninvasively. The lasers project onto the photo being taken, and because the inter-beam distance is known, they act as a scale for image analysis programs like ImageJ. Traditionally, this method has been used to measure larger morphological traits (e.

Spine surgeon versus AI algorithm full-length radiographic measurements: a validation study of complex adult spinal deformity patients.

Introduction: Spinal measurements play an integral role in surgical planning for a variety of spine procedures. Full-length imaging eliminates distortions that can occur with stitched images. However, these images take radiologists significantly longer to read than conventional radiographs.

The Sacroiliac Joint: A Current State-of-the-Art Review.

» The sacroiliac joint (SIJ) is a common cause of low back pain and should be included in the differential diagnosis.» Nonoperative treatment of sacroiliac pain is always the first line of therapy; however, when it is unsuccessful and becomes chronic, then recurrent nonoperative treatment becomes expensive.» Surgical treatment is cost-effective in appropriately selected patients.

Randomized Trial of Augmented Pelvic Fixation in Patients Undergoing Thoracolumbar Fusion for Adult Spine Deformity: Initial Results from a Multicenter Randomized Trial.

Background: The optimal configuration for spinopelvic fixation during multilevel spine fusion surgery for adult spine deformity remains unclear. Postoperative sacroiliac (SI) joint pain, S2AI screw loosening and implant breakage could be related to continued motion of the SI joint with use of only a single point of fixation across the SI joint.

Methods: Prospective, international, multicenter randomized controlled trial of 222 patients with adult spine deformity scheduled for multilevel (4 or more levels) spine fusion surgery with pelvic fixation.

Treatment of an Impending Pathologic Sacral Fracture with a Novel Iliosacral Fusion Construct: A Case Report.

Case: A 49-year-old woman presented with left leg radiculopathy and posterior pelvic pain. Subsequent evaluation demonstrated metastatic multiple myeloma with an impending left S1 sacral fracture. Immediate posterior pelvic ring stabilization was recommended to prevent fracture and disruption of her oncologic recovery.

Effect of revision sacroiliac joint fusion on unresolved pain and disability: a retrospective cohort study.

Purpose: The sacroiliac (SI) joint is recognized as a source of low back pain in 15-30% of patients. Though randomized controlled trials have shown clinical improvement following SI joint fusion in 83.1% of patients, revision rates of 2.

Tension Parameters of Junctional Tethers in Proximal Junction Kyphosis: A Cadaveric Biomechanical Study.

Objective: Proximal junctional failure following surgical correction for adult spinal deformity significantly impacts quality of life and increases the economic burden of treating underlying spinal deformity. The objective of this cadaver study was to determine optimal tension parameters in junctional tethers for proximal junctional kyphosis prevention.

Methods: Cadaveric specimens were used to establish the optimal tension range in polyethylene tethering devices, such as the VersaTie (NuVasive) used in this study.

Effects of BMI on SI joint fusion outcomes: examining the evidence to improve insurance guidelines.

Background Context: Obesity is increasing. Previous studies have demonstrated an association between obesity and adverse events after lumbar fusion. There is limited evidence on the effect of obesity on minimally invasive SI joint fusion (SIJF) outcomes.

Lumbar degenerative spondylolisthesis: role of sagittal alignment.

Purpose: To evaluate the sagittal alignment of the lumbar spine in patients with degenerative spondylolisthesis at the L4-5 level.

Methods: Patients with untreated degenerative spondylolisthesis at L4-5 were retrospectively identified from the clinical practice of spine surgeons at an academic medical center. All patients had standing X-rays that were reviewed by the senior surgeon to confirm the presence of degenerative spondylolisthesis at L4-5.

Does A Hinged Operating Table Facilitate Sagittal Correction in Transforaminal Lumbar Interbody Fusion With Smith-Peterson Osteotomy? A Radiographic Analysis.

Background: Osteotomies allow the restoration of appropriate sagittal alignment; however, closure of osteotomies can be challenging. Typical closure involves compressing pedicle screw heads across the rods, potentially causing screw loosening and failure. Motorized hinged operating tables are often used to assist with controlled closure of osteotomies without manual compression, but there is no published research quantifying the amount of correction provided solely by changes in the table angle.