Osteoporosis treatment prevents hip fracture similarly in both sexes: the FOCUS observational study.

Randomized trials have not been performed, and may never be, to determine if osteoporosis treatment prevents hip fracture in men. Addressing that evidence gap, we analyzed data from an observational study of new hip fractures in a large integrated healthcare system to compare the reduction in hip fractures associated with standard-of-care osteoporosis treatment in men versus women. Sampling from 271,389 patients aged ≥ 65 who had a hip-containing CT scan during care between 2005 and 2018, we selected all who subsequently had a first hip fracture (cases) after the CT scan (start of observation) and a sex-matched equal number of randomly selected patients.

Increased risks of vertebral fracture and reoperation in primary spinal fusion patients who test positive for osteoporosis by Biomechanical Computed Tomography analysis.

Background Context: While osteoporosis is a risk factor for adverse outcomes in spinal fusion patients, diagnosing osteoporosis reliably in this population has been challenging due to degenerative changes and spinal deformities. Addressing that challenge, biomechanical computed tomography analysis (BCT) is a CT-based diagnostic test for osteoporosis that measures both bone mineral density and bone strength (using finite element analysis) at the spine; CT scans taken for spinal evaluation or previous care can be repurposed for the analysis.

Purpose: Assess the effectiveness of BCT for preoperatively identifying spinal fusion patients with osteoporosis who are at high risk of reoperation or vertebral fracture.

Cost-Effectiveness of Osteoporosis Screening Using Biomechanical Computed Tomography for Patients With a Previous Abdominal CT.

Osteoporosis screening rates by DXA are low (9.5% women, 1.7% men) in the US Medicare population aged 65 years and older.

Osteoporosis and Hip Fracture Risk From Routine Computed Tomography Scans: The Fracture, Osteoporosis, and CT Utilization Study (FOCUS).

Methods now exist for analyzing previously taken clinical computed tomography (CT) scans to measure a dual-energy X-ray absorptiometry (DXA)-equivalent bone mineral density (BMD) at the hip and a finite element analysis-derived femoral strength. We assessed the efficacy of this "biomechanical CT" (BCT) approach for identifying patients at high risk of incident hip fracture in a large clinical setting. Using a case-cohort design sampled from 111,694 women and men aged 65 or older who had a prior hip CT scan, a DXA within 3 years of the CT, and no prior hip fracture, we compared those with subsequent hip fracture (n = 1959) with randomly selected sex-stratified controls (n = 1979) and analyzed their CT scans blinded to all other data.

Phantomless calibration of CT scans for measurement of BMD and bone strength-Inter-operator reanalysis precision.

Patient-specific phantomless calibration of computed tomography (CT) scans has the potential to simplify and expand the use of pre-existing clinical CT for quantitative bone densitometry and bone strength analysis for diagnostic and monitoring purposes. In this study, we quantified the inter-operator reanalysis precision errors for a novel implementation of patient-specific phantomless calibration, using air and either aortic blood or hip adipose tissue as internal calibrating reference materials, and sought to confirm the equivalence between phantomless and (traditional) phantom-based measurements. CT scans of the spine and hip for 25 women and 15 men (mean±SD age of 67±9years, range 41-86years), one scan per anatomic site per patient, were analyzed independently by two analysts using the VirtuOst software (O.

Comparison of non-invasive assessments of strength of the proximal femur.

It is not clear which non-invasive method is most effective for predicting strength of the proximal femur in those at highest risk of fracture. The primary aim of this study was to compare the abilities of dual energy X-ray absorptiometry (DXA)-derived aBMD, quantitative computed tomography (QCT)-derived density and volume measures, and finite element analysis (FEA)-estimated strength to predict femoral failure load. We also evaluated the contribution of cortical and trabecular bone measurements to proximal femur strength.

Vertebral and femoral bone mineral density and bone strength in prostate cancer patients assessed in phantomless PET/CT examinations.

Purpose: Bone fracture risk assessed ancillary to positron emission tomography with computed tomography co-registration (PET/CT) could provide substantial clinical value to oncology patients with elevated fracture risk without introducing additional radiation dose. The purpose of our study was to investigate the feasibility of obtaining valid measurements of bone mineral density (BMD) and finite element analysis-derived bone strength of the hip and spine using PET/CT examinations of prostate cancer patients by comparing against values obtained using routine multidetector-row computed tomography (MDCT) scans-as validated in previous studies-as a reference standard.

Materials And Methods: Men with prostate cancer (n=82, 71.

Effect of Testosterone Treatment on Volumetric Bone Density and Strength in Older Men With Low Testosterone: A Controlled Clinical Trial.

Importance: As men age, they experience decreased serum testosterone concentrations, decreased bone mineral density (BMD), and increased risk of fracture.

Objective: To determine whether testosterone treatment of older men with low testosterone increases volumetric BMD (vBMD) and estimated bone strength.

Design, Setting, And Participants: Placebo-controlled, double-blind trial with treatment allocation by minimization at 9 US academic medical centers of men 65 years or older with 2 testosterone concentrations averaging less than 275 ng/L participating in the Testosterone Trials from December 2011 to June 2014.

Virtual stress testing of fracture stability in soldiers with severely comminuted tibial fractures.

Virtual stress testing (VST) provides a non-invasive estimate of the strength of a healing bone through a biomechanical analysis of a patient's computed tomography (CT) scan. We asked whether VST could improve management of patients who had a tibia fracture treated with external fixation. In a retrospective case-control study of 65 soldier-patients who had tibia fractures treated with an external fixator, we performed VST utilizing CT scans acquired prior to fixator removal.

Comprehensive Assessment of Osteoporosis and Bone Fragility with CT Colonography.

Purpose: To evaluate the ability of additional analysis of computed tomographic (CT) colonography images to provide a comprehensive osteoporosis assessment.

Materials And Methods: This Health Insurance Portability and Accountability Act-compliant study was approved by our institutional review board with a waiver of informed consent. Diagnosis of osteoporosis and assessment of fracture risk were compared between biomechanical CT analysis and dual-energy x-ray absorptiometry (DXA) in 136 women (age range, 43-92 years), each of whom underwent CT colonography and DXA within a 6-month period (between January 2008 and April 2010).

Assessing the Effects of Teriparatide Treatment on Bone Mineral Density, Bone Microarchitecture, and Bone Strength.

Background: To gain insight into how teriparatide affects various bone health parameters, we assessed the effects of teriparatide treatment with use of standard DXA (dual x-ray absorptiometry) technology and two newer technologies, high-resolution MRI (magnetic resonance imaging) and finite element analysis of quantitative CT (computed tomography) scans.

Methods: In this phase-4, open-label study, postmenopausal women with severe osteoporosis received 20 μg/day of teriparatide. Assessments included (1) changes in areal BMD (bone mineral density) (in g/cm) at the radius, spine, and hip on DXA, (2) changes in volumetric BMD (in mg/cm) at the spine and hip on quantitative CT scans, (3) changes in bone microarchitecture at the radius on high-resolution MRI, (4) estimated changes in spine and hip strength according to finite element analysis of quantitative CT scans, (5) changes in bone turnover markers in serum, and (6) safety.

The Testosterone Trials: Seven coordinated trials of testosterone treatment in elderly men.

Background The prevalence of low testosterone levels in men increases with age, as does the prevalence of decreased mobility, sexual function, self-perceived vitality, cognitive abilities, bone mineral density, and glucose tolerance, and of increased anemia and coronary artery disease. Similar changes occur in men who have low serum testosterone concentrations due to known pituitary or testicular disease, and testosterone treatment improves the abnormalities. Prior studies of the effect of testosterone treatment in elderly men, however, have produced equivocal results.

Assessment of incident spine and hip fractures in women and men using finite element analysis of CT scans.

Finite element analysis of computed tomography (CT) scans provides noninvasive estimates of bone strength at the spine and hip. To further validate such estimates clinically, we performed a 5-year case-control study of 1110 women and men over age 65 years from the AGES-Reykjavik cohort (case = incident spine or hip fracture; control = no incident spine or hip fracture). From the baseline CT scans, we measured femoral and vertebral strength, as well as bone mineral density (BMD) at the hip (areal BMD only) and lumbar spine (trabecular volumetric BMD only).

Femoral and vertebral strength improvements in postmenopausal women with osteoporosis treated with denosumab.

In the randomized, placebo-controlled FREEDOM study of women aged 60 to 90 years with postmenopausal osteoporosis, treatment with denosumab once every 6 months for 36 months significantly reduced hip and new vertebral fracture risk by 40% and 68%, respectively. To gain further insight into this efficacy, we performed a nonlinear finite element analysis (FEA) of hip and spine quantitative computed tomography (QCT) scans to estimate hip and spine strength in a subset of FREEDOM subjects (n = 48 placebo; n = 51 denosumab) at baseline, 12, 24, and 36 months. We found that, compared with baseline, the finite element estimates of hip strength increased from 12 months (5.

Femoral strength in osteoporotic women treated with teriparatide or alendronate.

To gain insight into the clinical effect of teriparatide and alendronate on the hip, we performed non-linear finite element analysis of quantitative computed tomography (QCT) scans from 48 women who had participated in a randomized, double-blind clinical trial comparing the effects of 18-month treatment of teriparatide 20 μg/d or alendronate 10mg/d. The QCT scans, obtained at baseline, 6, and 18 months, were analyzed for volumetric bone mineral density (BMD) of trabecular bone, the peripheral bone (defined as all the cortical bone plus any endosteal trabecular bone within 3 mm of the periosteal surface), and the integral bone (both trabecular and peripheral), and for overall femoral strength in response to a simulated sideways fall. At 18 months, we found in the women treated with teriparatide that trabecular volumetric BMD increased versus baseline (+4.

Mechanical contributions of the cortical and trabecular compartments contribute to differences in age-related changes in vertebral body strength in men and women assessed by QCT-based finite element analysis.

The biomechanical mechanisms underlying sex-specific differences in age-related vertebral fracture rates are ill defined. To gain insight into this issue, we used finite element analysis of clinical computed tomography (CT) scans of the vertebral bodies of L3 and T10 of young and old men and women to assess age- and sex-related differences in the strength of the whole vertebra, the trabecular compartment, and the peripheral compartment (the outer 2 mm of vertebral bone, including the thin cortical shell). We sought to determine whether structural and geometric changes with age differ in men and women, making women more susceptible to vertebral fractures.

Age-dependence of femoral strength in white women and men.

Although age-related variations in areal bone mineral density (aBMD) and the prevalence of osteoporosis have been well characterized, there is a paucity of data on femoral strength in the population. Addressing this issue, we used finite-element analysis of quantitative computed tomographic scans to assess femoral strength in an age-stratified cohort of 362 women and 317 men, aged 21 to 89 years, randomly sampled from the population of Rochester, MN, and compared femoral strength with femoral neck aBMD. Percent reductions over adulthood were much greater for femoral strength (55% in women, 39% in men) than for femoral neck aBMD (26% in women, 21% in men), an effect that was accentuated in women.

Finite element analysis of the proximal femur and hip fracture risk in older men.

Low areal BMD (aBMD) is associated with increased risk of hip fracture, but many hip fractures occur in persons without low aBMD. Finite element (FE) analysis of QCT scans provides a measure of hip strength. We studied the association of FE measures with risk of hip fracture in older men.

Once-monthly oral ibandronate improves biomechanical determinants of bone strength in women with postmenopausal osteoporosis.

Context: Bone strength and fracture resistance are determined by bone mineral density (BMD) and structural, mechanical, and geometric properties of bone. DESIGN, SETTING, AND OBJECTIVES: This randomized, double-blind, placebo-controlled outpatient study evaluated effects of once-monthly oral ibandronate on hip and lumbar spine BMD and calculated strength using quantitative computed tomography (QCT) with finite element analysis (FEA) and dual-energy x-ray absorptiometry (DXA) with hip structural analysis (HSA).

Participants: Participants were women aged 55-80 yr with BMD T-scores -2.

Finite element modeling of the human thoracolumbar spine.

Study Design: Biomechanical properties within cadaveric vertebral bodies were parametrically studied using finite element analysis after calibration to experimental data.

Objectives: To develop and validate three-dimensional finite element models of the human thoracolumbar spine based on quantitative computed tomography scans. Specifically, combine finite element modeling together with biomechanical testing circumventing problems associated with direct measurements of shell properties.

Quantitative computed tomography estimates of the mechanical properties of human vertebral trabecular bone.

The objective of this study was to report our quantitative computed tomography (QCT) density-mechanical property regressions for trabecular bone for use in biomechanical modelling of the human spine. Cylindrical specimens of human vertebral trabecular bone (from T10 to L4) were cored from 32 cadavers (mean +/- SD age = 70.1 +/- 16.