Workplace Productivity, Health and Wellbeing: Findings From a Cluster Randomised Controlled Trial of a Workplace Intervention to Reduce Sitting in Office Workers.

Objective: The aim of the study was to evaluate the feasibility and potential effects of a workplace intervention to reduce and break up sitting.

Methods: Office workers were randomized in clusters to intervention ( n = 22) or control ( n = 22). The intervention included a height-adjustable workstation, education, computer prompt software, and line manager support.

The Frail-LESS (LEss Sitting and Sarcopenia in Frail older adults) intervention to improve sarcopenia and maintain independent living via reductions in prolonged sitting: a randomised controlled feasibility trial protocol.

Background: Sarcopenia is a progressive and generalised loss of muscle mass and function with advancing age and is a major contributor to frailty. These conditions lead to functional disability, loss of independence, and lower quality of life. Sedentary behaviour is adversely associated with sarcopenia and frailty.

Workplace Intervention for Reducing Sitting Time in Sedentary Workers: Protocol for a Pilot Study Using the Behavior Change Wheel.

The workplace is a major contributor to excessive sitting in office workers. There are a wide array of adverse effects of high volumes of sitting time, including an increased risk of type 2 diabetes and depression. Active workstations can be used in effective interventions to decrease workplace sitting.

Evaluating a multi-component intervention to reduce and break up office workers' sitting with sit-stand desks using the APEASE criteria.

Objective: Sedentary workplace interventions have had success in reducing excessive sitting time in office workers, but barriers to implementation and uptake remain. This study formally assessed a theory-derived, sit-stand desk intervention using the APEASE (Acceptability, Practicability, Effectiveness, Affordability, Side-effects, Equity) criteria.

Methods: Thirteen adults (eight female, mean age 38 ± 10 years) from the treatment arm of a sedentary behaviour intervention participated in semi-structured interviews.

A randomised-controlled feasibility study of the REgulate your SItting Time (RESIT) intervention for reducing sitting time in individuals with type 2 diabetes: study protocol.

Background: People with type 2 diabetes mellitus (T2DM) generally spend a large amount of time sitting. This increases their risk of cardiovascular disease, premature mortality, diabetes-related complications and mental health problems. There is a paucity of research that has evaluated interventions aimed at reducing and breaking up sitting in people with T2DM.

A Comparison of Four Approaches to Evaluate the Sit-to-Stand Movement.

The sit-to-stand test (STS) is a simple test of function in older people that can identify people at risk of falls. The aim of this study was to develop two novel methods of evaluating performance in the STS using a low-cost RGB camera and another an instrumented chair containing load cells in the seat of the chair to detect center of pressure movements and ground reaction forces. The two systems were compared to a Kinect and a force plate.

A Pilot Study to Detect Balance Impairment in Older Adults Using an Instrumented One-Leg Stance Test.

The aim of this study was to investigate whether parameters from an instrumented one-leg stance (OLS) on a force plate could provide relevant information related to fall risk in older people. Forty-two community dwelling older people including 17 fallers and 25 nonfallers, and 25 young subjects performed a OLS while standing on a force plate, with parameters related to transferring weight onto one leg and postural sway in singe-leg stance evaluated. No differences were observed between older fallers and nonfallers and the younger participants for any of the weight transfer parameters.

Breaking barriers: using the behavior change wheel to develop a tailored intervention to overcome workplace inhibitors to breaking up sitting time.

Background: The workplace is a prominent domain for excessive sitting. The consequences of increased sitting time include adverse health outcomes such as cardiovascular disease and poor mental wellbeing. There is evidence that breaking up sitting could improve health, however, any such intervention in the workplace would need to be informed by a theoretical evidence-based framework.

Perceived Barriers and Facilitators to Breaking Up Sitting Time among Desk-Based Office Workers: A Qualitative Investigation Using the TDF and COM-B.

High amounts of sedentary behaviour, such as sitting, can lead to adverse health consequences. Interventions to break up prolonged sitting in the workplace have used active workstations, although few studies have used behaviour change theory. This study aimed to combine the Theoretical Domains Framework (TDF) and the Capability, Opportunity, and Motivation to Behaviour system (COM-B) to investigate perceived barriers and facilitators to breaking up sitting in desk-based office workers.

Sitting Time and Risk of Cardiovascular Disease and Diabetes: A Systematic Review and Meta-Analysis.

Context: Whether physical activity attenuates the association of total daily sitting time with cardiovascular disease and diabetes incidence is unclear. This systematic review and meta-analysis examined the association of total daily sitting time with cardiovascular disease and diabetes with and without adjustment for physical activity.

Evidence Acquisition: PubMed, Web of Science, BASE, MEDLINE, Academic Search Elite, and ScienceDirect were searched for prospective studies, published between January 1, 1989, and February 15, 2019, examining the association of total daily sitting time with cardiovascular disease or diabetes outcomes.

The Impact of Active Workstations on Workplace Productivity and Performance: A Systematic Review.

Active workstations have been recommended for reducing sedentary behavior in the workplace. It is important to understand if the use of these workstations has an impact on worker productivity. The aim of this systematic review was to examine the effect of active workstations on workplace productivity and performance.

Identification of the period of stability in a balance test after stepping up using a simplified cumulative sum.

Falls are a major cause of death in older people. One method used to predict falls is analysis of Centre of Pressure (CoP) displacement, which provides a measure of balance quality. The Balance Quality Tester (BQT) is a device based on a commercial bathroom scale that calculates instantaneous values of vertical ground reaction force (Fz) as well as the CoP in both anteroposterior (AP) and mediolateral (ML) directions.

Balance quality assessment as an early indicator of physical frailty in older people.

Frailty is an increasingly common geriatric condition that results in an increased risk of adverse health outcomes such as falls. The most widely-used means of detecting frailty is the Fried phenotype, which includes several objective measures such as grip strength and gait velocity. One method of screening for falls is to measure balance, which can be done by a range of techniques including the assessment of the Centre of Pressure (CoP) during a balance assessment.

Measuring grip strength in older adults: comparing the grip-ball with the Jamar dynamometer.

Background And Purpose: Decreased grip strength is a predictor of adverse outcomes in older adults. A Grip-ball was developed that can be used for home-based self-monitoring of grip strength to detect decline at an early stage. The purpose of this study was to evaluate the reliability and validity of measurements obtained with the Grip-ball in older adults.

Development of a monitoring system for physical frailty in independent elderly.

Frailty is of increasing concern due to the associated decrease in independence of elderly who suffer from the condition. An innovative system was designed in order to objectively quantify the level of frailty based on a series of remote tests, each of which used objects similar to those found in peoples' homes. A modified ball, known as the Grip-ball was used to evaluate maximal grip force and exhaustion during an entirely remote assessment.

User-centered development and testing of a monitoring system that provides feedback regarding physical functioning to elderly people.

Purpose: To involve elderly people during the development of a mobile interface of a monitoring system that provides feedback to them regarding changes in physical functioning and to test the system in a pilot study.

Methods And Participants: The iterative user-centered development process consisted of the following phases: (1) selection of user representatives; (2) analysis of users and their context; (3) identification of user requirements; (4) development of the interface; and (5) evaluation of the interface in the lab. Subsequently, the monitoring and feedback system was tested in a pilot study by five patients who were recruited via a geriatric outpatient clinic.

Estimation of grip force using the Grip-ball dynamometer.

The Grip-ball is an innovative device that has been designed to measure grip strength. The Grip-ball consists of an airtight ball that contains a pressure sensor and Bluetooth communication system. The Grip-ball can be inflated to different initial pressures, with data available continuously in real time.

Reliability and validity of the Grip-Ball dynamometer for grip-strength measurement.

Grip-strength measurement is a key element in the evaluation of numerous conditions including frailty. An innovative grip-strength evaluation tool, the Grip-Ball has been developed for remote assessment of grip-strength. The Grip-Ball is an airtight ball that can be inflated to different pressures, thus varying the stiffness of the ball and the grip-strength dynamics.

Design and validation of the Grip-ball for measurement of hand grip strength.

The Grip-ball is a new dynamometer used to evaluate grip strength, as well as for use in home-based rehabilitation of the hand and forearm. The Grip-ball consists of pressure and temperature sensors and an electronic wireless communication system contained in an airtight ball. That can be inflated to different pressures.

Construct validity of a modified bathroom scale that can measure balance in elderly people.

Objectives: To investigate the construct validity of a bathroom scale measuring balance in elderly people.

Design: Cross-sectional study.

Setting: Participants were recruited via nursing homes and an organization that provides exercise classes for community-dwelling elderly people.

Analysis of fatigue and tremor during sustained maximal grip contractions using Hilbert-Huang Transformation.

The objective of this study was to evaluate muscle fatigue and tremor during a Sustained Maximal Grip Contraction (SMGC) using the Hilbert-Huang Transformation (HHT). Thirty-nine healthy subjects volunteered for the study and performed a 25-s SMGC. Fatigue parameters such as the relative force output (RFO) were calculated from the residual of SMGC after applying Empirical Mode Decomposition (EMD).

Longitudinal evaluation of balance quality using a modified bathroom scale: usability and acceptability.

We adapted a commercial bathroom scale in order to acquire the raw data from the weight sensors and then to send them to a server via a mobile phone. We investigated the usability and acceptability of the device in a long-term experiment with 22 elderly users that produced more than 5000 weight recordings. Four basic variables were extracted from the vertical force measurements and the stabilogram.

Classification of elderly as fallers and non-fallers using Centre of Pressure velocity.

Falls are a leading cause of death in the elderly. One of the most common methods of predicting falls is to evaluate balance using force plate measurement of the Centre of Pressure (COP) displacement. This signal, known as a stabilogram, can be decomposed into movement in anteroposterior (AP) and mediolateral (ML) directions.

Domo-Grip: functional evaluation and rehabilitation using grip force.

Grip force measurement is routinely used to identify pathologies, evaluate muscular function, and as part of rehabilitation. Grip force has also been shown to be a good indicator of the capacity of elderly to live independently owing to its strong relationship with clinical tests such as the Index of Activities of Daily Living. An autonomous, communicant grip-force measurement device is presented in this paper in order to perform grip-force evaluation at home.

Predicting maximal grip strength using hand circumference.

The objective of this study was to analyze the correlations between anthropometric data and maximal grip strength (MGS) in order to establish a simple model to predict "normal" MGS. Randomized bilateral measurement of MGS was performed on a homogeneous population of 100 subjects. MGS was measured according to a standardized protocol with three dynamometers (Jamar, Myogrip and Martin Vigorimeter) for both dominant and non-dominant sides.