Publications by authors named "David Hintenlang"

Purpose: To determine the magnitude of MRI image distortion based on 6 consecutive years of annual quality assurances/measurements on 14 MRI scanners used for radiation therapy and to provide evidence for the inclusion of additional margin for treatment planning.

Methods And Materials: We used commercial MRI image phantoms to quantitatively study the MRI image distortion over period of 6 years for up to 14 1.5 and 3 T MRI scanners that could potentially be used to provide MRI images for treatment planning.

View Article and Find Full Text PDF

There is no current authoritative accounting of the number of clinical imaging physicists practicing in the United States. Information about the workforce is needed to inform future efforts to secure training pathways and opportunities. In this study, the AAPM Diagnostic Demand and Supply Projection Working Group collected lists of medical physicists from several state registration and licensure programs and the Conference of Radiation Control Program Directors (CRCPD) registry.

View Article and Find Full Text PDF

Purpose: Dual-energy computed tomography (DECT) has been proposed for quantification of hepatic iron concentration (IC). However, the lower limit of quantification (LLOQ) has not been established, limiting the clinical adoption of this technology. In this study, we aim to (a) establish the LLOQ using phantoms and (b) investigate the effects of patient size, dose level, energy combination, and reconstruction method.

View Article and Find Full Text PDF

Purpose: To describe a custom-built, web-based MR Quality Control (QC) database, and to assess its impact on the QC workflow and outcomes in a large U.S. academic medical center.

View Article and Find Full Text PDF

Rationale And Objectives: The purpose of this study was to investigate the potential effects of patient size and radiation dose on the accuracy of iodine quantification using dual-source dual-energy computed tomography (CT).

Materials And Methods: Three phantoms representing different patient sizes were constructed, containing iodine inserts with concentrations from 0 to 20 mg/ml. Dual-energy CT scans were performed at six dose levels from 2 to 30 mGy.

View Article and Find Full Text PDF

Objective: The purpose of this study was to develop a road map for rapid construction of anthropomorphic phantoms from computational human phantoms for use in diagnostic imaging dosimetry studies. These phantoms are ideal for performing pregnant-patient dosimetry because the phantoms imitate the size and attenuation properties of an average-sized pregnant woman for multiple gestational periods.

Materials And Methods: The method was derived from methods and materials previously described but adapted for 3D printing technology.

View Article and Find Full Text PDF

Purpose: To document a study in shielding a high-sensitivity digital mammography system detector from AC magnetic fields of magnitudes great enough to induce imaging artifacts.

Methods/materials: Preliminary evaluation of AC magnetic fields at a site designated for a digital breast tomosynthesis (DBT) system raised concerns that the magnetic component of electromagnetic interference (EMI) may be great enough to induce imaging artifacts. Subsequent measurements using digital detector arrays from two separate manufacturers verified this concern, and AC magnetic fields were mapped, spatially and temporally, throughout the area of concern.

View Article and Find Full Text PDF

Purpose: To physically validate the accuracy of a Monte Carlo-based, phantom-derived methodology for computed tomography (CT) dosimetry that utilizes organ doses from precomputed axial scans and that accounts for tube current modulation (TCM).

Methods: The output of a Toshiba Aquilion ONE CT scanner was modeled, based on physical measurement, in the Monte Carlo radiation transport code MCNPX (v2.70).

View Article and Find Full Text PDF

Advanced imaging technologies (AIT) are being developed for passenger airline transportation. They are designed to provide enhanced security benefits by identifying objects on passengers that would not be detected by methodologies now used for routine surveillance. X-ray backscatter imaging is one AIT system being considered.

View Article and Find Full Text PDF

Purpose: Kilovoltage (kV) x-rays pose a significant challenge for radiation dosimetry. In the kV energy range, even small differences in material composition can result in significant variations in the absorbed energy between soft tissue and the detector. In addition, the use of electronic systems in light detection has demonstrated measurement losses at high photon fluence rates incident to the detector.

View Article and Find Full Text PDF

Physical anthropomorphic phantoms have been utilized for a variety of dosimet- ric studies across a range of procedures utilizing diagnostic imaging equipment. Unfortunately, these phantoms are often limited to a single reference size, which often may not be representative of the patient population at large. This work set out to develop an adipose tissue-equivalent substitute material that could be used to create low cost physical additions for existing anthropomorphic phantoms.

View Article and Find Full Text PDF

Purpose: To validate the accuracy of a Monte Carlo source model of the Siemens SOMATOM Sensation 16 CT scanner using organ doses measured in physical anthropomorphic phantoms.

Methods: The x-ray output of the Siemens SOMATOM Sensation 16 multidetector CT scanner was simulated within the Monte Carlo radiation transport code, MCNPX version 2.6.

View Article and Find Full Text PDF

In helical computed tomography (CT), reconstruction information from volumes adjacent to the clinical volume of interest (VOI) is required for proper reconstruction. Previous studies have relied upon either operator console readings or indirect extrapolation of measurements in order to determine the over-ranging length of a scan. This paper presents a methodology for the direct quantification of over-ranging dose contributions using real-time dosimetry.

View Article and Find Full Text PDF

Purpose: The purpose of this study was to develop a practical method for estimating organ doses from kilovoltage cone-beam CT (CBCT) that can be performed with readily available phantoms and dosimeters. The accuracy of organ dose estimates made using the ImPACT patient dose calculator was also evaluated.

Methods: A 100 mm pencil chamber and standard CT dose index (CTDI) phantoms were used to measure the cone-beam dose index (CBDI).

View Article and Find Full Text PDF

The main purpose of this work was to quantify patient organ doses from the two kilovoltage cone beam computed tomography (CBCT) systems currently available on medical linear accelerators, namely the X-ray Volumetric Imager (XVI, Elekta Oncology Systems) and the On-Board Imager (OBI, Varian Medical Systems). Organ dose measurements were performed using a fiber-optic coupled (FOC) dosimetry system along with an adult male anthropomorphic phantom for three different clinically relevant scan sites: head, chest, and pelvis. The FOC dosimeter was previously characterized at diagnostic energies by Hyer et al.

View Article and Find Full Text PDF

This paper reports on the methodology and materials used to construct anthropomorphic phantoms for use in dosimetry studies, improving on methods and materials previously described by Jones et al. [Med Phys. 2006;33(9):3274-82].

View Article and Find Full Text PDF

This work reports on the characterization of a new fiber-optic coupled (FOC) dosimeter for use in the diagnostic radiology energy range. The FOC dosimeter was constructed by coupling a small cylindrical plastic scintillator, 500 microm in diameter and 2 mm in length, to a 2 m long optical fiber, which acts as a light guide to transmit scintillation photons from the sensitive element to a photo-multiplier tube (PMT). A serial port interface on the PMT permits real-time monitoring of light output from the dosimeter via a custom computer program.

View Article and Find Full Text PDF

Many types of dosemeters have been investigated for absorbed dose measurements in diagnostic radiology, including ionisation chambers, metal-oxide semiconductor field-effect transistor dosemeters, thermoluminescent dosemeters, optically stimulated luminescence detectors, film and diodes. Each of the aforementioned dosemeters suffers from a critical limitation, either the need to interrogate, or read, the dosemeter to retrieve dose information or large size to achieve adequate sensitivity. This work presents an evaluation of a fibre optic-coupled dosemeter (FOCD) for use in diagnostic radiology dose measurement.

View Article and Find Full Text PDF

Fiber-optic-coupled radioluminescent (FOC) dosimeters are members of a new family of dosimeters that are finding increased clinical applications. This study provides the first characterization of a Cu doped quartz FOC dosimeter at diagnostic energies, specifically across the range of x-ray energies and intensities used in mammographies. We characterize the calibration factors, linearity, angular dependence, and reproducibility of the FOC dosimeters.

View Article and Find Full Text PDF

As multidetector computed tomography (CT) serves as an increasingly frequent diagnostic modality, radiation risks to patients became a greater concern, especially for children due to their inherently higher radiosensitivity to stochastic radiation damage. Current dose evaluation protocols include the computed tomography dose index (CTDI) or point detector measurements using anthropomorphic phantoms that do not sufficiently provide accurate information of the organ-averaged absorbed dose and corresponding effective dose to pediatric patients. In this study, organ and effective doses to pediatric patients under helical multislice computed tomography (MSCT) examinations were evaluated using an extensive series of anthropomorphic computational phantoms and Monte Carlo radiation transport simulations.

View Article and Find Full Text PDF

To provide more detailed data on organ and effective doses in digital upper gastrointestinal (UGI) fluoroscopy studies of newborns and infants, the present study was conducted employing the time-sequence videotape-analysis technique used in a companion study of newborn and infant voiding cystourethrograms (VCUG). This technique was originally pioneered [O. H.

View Article and Find Full Text PDF

The time-sequence videotape-analysis methodology, developed [Sulieman et al., Radiology 178, 653-658 (1991)] for use in tissue dose estimations in adult fluoroscopy examinations and utilized [Bolch et al., Med.

View Article and Find Full Text PDF

Following the recent completion of a tomographic physical newborn dosimetry phantom with incorporated metal-oxide-semiconductor field effect transistor (MOSFET) dosimetry system, it was necessary to derive scaling factors in order to calculate organ doses in the physical phantom given point dose measurements via the MOSFET dosimeters (preceding article in this issue). In this study, we present the initial development of scaling factors using projection radiograph data. These point-to-organ dose scaling factors (SF(POD)) were calculated using a computational phantom created from the same data set as the physical phantom, but which also includes numerous segmented internal organs and tissues.

View Article and Find Full Text PDF

In this study, two computational phantoms of the newborn patient were used to assess individual organ doses and effective doses delivered during head, chest, abdomen, pelvis, and torso examinations using the Siemens SOMATOM Sensation 16 helical multi-slice computed tomography (MSCT) scanner. The stylized phantom used to model the patient anatomy was the revised ORNL newborn phantom by Han et al (2006 Health Phys.90 337).

View Article and Find Full Text PDF

Five high-sensitivity metal oxide semiconductor field effect transistor dosimeters in the TN-502 and 1002 series (Thomson Nielsen Electronics Ltd., 25B, Northside Road, Ottawa, ON K2H8S1, Canada) were evaluated for use in the mammography x-ray energy range (22-50 kVp) as a tool to assist in the documentation of patient specific average glandular dose. The dosimeters were interfaced with the Patient Dose Verification System, model No.

View Article and Find Full Text PDF