A multifunctional nanocomposite coated with a BSA membrane for cascaded nitric oxide therapy.

Gas therapy based on nitric oxide (NO) has emerged as a potential therapeutic approach for cancer, and in conjunction with multi-mode combination therapy, offers new possibilities for achieving significant hyperadditive effects. In this study, an integrated AI-MPDA@BSA nanocomposite for diagnosis and treatment was constructed for PDA based photoacoustic imaging (PAI) and cascade NO release. Natural NO donor L-arginine (L-Arg) and photosensitizer (PS) IR780 were loaded into mesoporous polydopamine (MPDA).

Functionalized layered double hydroxide nanoparticles as an intelligent nanoplatform for synergistic photothermal therapy and chemotherapy of tumors.

In this work, a novel layered double hydroxide (LDH)-based multifunctional nanoplatform was built for synergistic photothermal therapy (PTT)/chemotherapy. The platform was modified using the peptide B3int to target cancer cells with overexpression of integrin αvβ3. Indocyanine green (ICG) and doxorubicin (DOX) were loaded into the nanocarrier (LDH-PEG-B3int NPs) to form a system having a high drug loading (18.

Co-delivery of doxorubicin and oleanolic acid by triple-sensitive nanocomposite based on chitosan for effective promoting tumor apoptosis.

Nanocomposites as "stevedores" for co-delivery of multidrugs hold great promise in addressing the drawbacks of traditional cancer chemotherapy. In this work, our strategy presents a new avenue for the stepwise release of two co-delivered agents into the tumor cells. The hybrid nanocomposite consists of a pH-responsive chitosan (CS), a thermosensitive poly(N-vinylcaprolactam) (PNVCL) and a functionalized cell-penetrating peptide (H6R6).

A Tumor Microenvironment-Responsive Biodegradable Mesoporous Nanosystem for Anti-Inflammation and Cancer Theranostics.

A nanoplatform that integrates diagnostic and therapeutic functions with intrinsic tumor microenvironment-responsive biodegradability is highly desired. Herein, a biodegradable nanotheranostic agent based on hollow mesoporous organosilica nanoparticles (HMONs), followed by encapsulating of heat shock protein 90 (Hsp 90) inhibitor is described. Then, the pore-engineering including gating with bovine serum albumin-iridium oxide nanoparticles (BSA-IrO ) and conjugation of polyethylene glycol (PEG) is conducted to yield 17AAG@HMONs-BSA-IrO -PEG (AHBIP) nanotheranostics for multimode computed tomography (CT)/photoacoustic (PA) imaging-guided photodynamic therapy (PDT) and low-temperature photothermal therapy (PTT).

A multifunctional nanoplatform based on MoS-nanosheets for targeted drug delivery and chemo-photothermal therapy.

Synergistic tumor treatment has recently attracted more and more attention due to its remarkable therapeutic effect. Herein, a multifunctional drug delivery system based on hyaluronic acid (HA) targeted dual stimulation responsive MoS nanosheets (HA-PEI-LA-MoS-PEG, HPMP) for active interaction with CD44 receptor positive MCF-7 cells is reported. Melanin (Mel), a new type of photothermal agent and doxorubicin (DOX) are both loaded onto the HPMP nanocomposite and can be released by mild acid or hyperthermia.

Multifunctional A7R Peptide-Modified Hollow Mesoporous Silica@Ag₂S Nanotheranostics for Photoacoustic/Near-Infrared Fluorescence Imaging-Guided Tumor-Targeted Chemo-Photothermal Therapy.

The fabrication of theranostic nanoplatforms which combine diagnostic and therapeutic functions have become an emerging approach for personal nanomedicine. Herein, a multifunctional nanoplatform consisting of A7R peptide (ATWLPPR) conjugated hollow mesoporous silica nanoparticles decorated with Ag₂S nanodots (Ag₂S@HMSs-A7R) has been developed as an efficient theranostic agent for simultaneous photoacoustic (PA) imaging and near-infrared fluorescence imaging (NIRF)-guided targeted chemotherapy and photothermal therapy against human breast cancer MDA-MB-231 cells. The design of Ag₂S doped HMSs by controlled growth of ultrasmall Ag₂S nanodots in the mesopores of HMSs.

Chemodrug-Gated Biodegradable Hollow Mesoporous Organosilica Nanotheranostics for Multimodal Imaging-Guided Low-Temperature Photothermal Therapy/Chemotherapy of Cancer.

Noninvasive physical treatment with relatively low intensity stimulation and the development of highly efficient anticancer medical strategy are still desirable for cancer therapy. Herein a versatile, biodegradable, hollow mesoporous organosilica nanocapsule (HMONs) nanoplatform that is capped by the gemcitabine (Gem) molecule through a pH-sensitive acetal covalent bond is designed. The fabricated nanocapsule exhibits desirable small molecule release at the tumor tissues/cell sites and shows a reduced risk for drug accumulation.

l-Peptide functionalized dual-responsive nanoparticles for controlled paclitaxel release and enhanced apoptosis in breast cancer cells.

Nanoparticles and macromolecular carriers have been widely used to increase the efficacy of chemotherapeutics, largely through passive accumulation provided by their enhanced permeability and retention effect. However, the therapeutic efficacy of nanoscale anticancer drug delivery systems is severely truncated by their low tumor-targetability and inefficient drug release at the target site. Here, the design and development of novel l-peptide functionalized dual-responsive nanoparticles (l-CS-g-PNIPAM-PTX) for active targeting and effective treatment of GRP78-overexpressing human breast cancer in vitro and in vivo are reported.

Fabrication and investigation of a biocompatible microfilament with high mechanical performance based on regenerated bacterial cellulose and bacterial cellulose.

A high-strength regenerated bacterial cellulose (RBC)/bacterial cellulose (BC) microfilament of potential use as a biomaterial was successfully prepared via a wet spinning process. The BC not only consists of a 3-D network composed of nanofibers with a diameter of several hundred nanometers but also has a secondary structure consisting of highly oriented nanofibrils with a diameter ranging from a few nanometers to tens of nanometers which explains the reason for the high mechanical strength of BC. Furthermore, a strategy of partially dissolving BC was used and this greatly enhanced the mechanical performance of spun filament and a method called post-treatment was utilized to remove residual solvents from the RBC/BC filaments.

Phenylboronic acid-diol crosslinked 6-O-vinylazeloyl-d-galactose nanocarriers for insulin delivery.

A new block polymer named poly 3-acrylamidophenylboronic acid-b-6-O-vinylazeloyl-d-galactose (p(AAPBA-b-OVZG)) was prepared using 3-acrylamidophenylboronic acid (AAPBA) and 6-O-vinylazeloyl-d-galactose (OVZG) via a two-step procedure involving S-1-dodecyl-S-(α', α'-dimethyl-α″-acetic acid) trithiocarbonate (DDATC) as chain transfer agent, 2,2-azobisisobutyronitrile (AIBN) as initiator and dimethyl formamide (DMF) as solvent. The structures of the polymer were examined by Fourier transform infrared spectroscopy (FT-IR) and H NMR and the thermal stability was determined by thermal gravimetric analysis (TG/DTG). Transmission electron microscopy (TEM) and dynamic light scattering (DLS) were utilized to evaluate the morphology and properties of the p(AAPBA-b-OVZG) nanoparticles.

Time-resolved fluorescence observation of di-tyrosine formation in horseradish peroxidase upon ultrasound treatment leading to enzyme inactivation.

The application of ultrasound to a solution can induce cavitional phenomena and generate high localised temperatures and pressures. These are dependent of the frequency used and have enabled ultrasound application in areas such as synthetic, green and food chemistry. High frequency (100kHz to 1MHz) in particular is promising in food chemistry as a means to inactivate enzymes, replacing the need to use periods of high temperature.

Synthesis and evaluation of temperature- and glucose-sensitive nanoparticles based on phenylboronic acid and N-vinylcaprolactam for insulin delivery.

Poly N-vinylcaprolactam-co-acrylamidophenylboronic acid p(NVCL-co-AAPBA) was prepared from N-vinylcaprolactam (NVCL) and 3-acrylamidophenylboronic acid (AAPBA), using 2,2-azobisisobutyronitrile (AIBN) as initiator. The synthesis and structure of the polymer were examined by Fourier Transform infrared spectroscopy (FT-IR) and (1)H-NMR. Dynamic light scattering (DLS), lower critical solution temperature (LCST) and transmission electron microscopy (TEM) were utilized to characterize the nanoparticles, CD spectroscopy was used to determine if there were any changes to the conformation of the insulin, and cell and animal toxicity were also investigated.

A novel multifunctional biomedical material based on polyacrylonitrile: Preparation and characterization.

Wet spun microfibers have great potential in the design of multifunctional controlled release materials. Curcumin (Cur) and vitamin E acetate (Vit. E Ac) were used as a model drug system to evaluate the potential application of the drug-loaded microfiber system for enhanced delivery.

Carboxymethyl chitosan-mediated synthesis of hyaluronic acid-targeted graphene oxide for cancer drug delivery.

In order to enhance the efficiency and specificity of anticancer drug delivery and realize intelligently controlled release, a new drug carrier was developed. Graphene oxide (GO) was first modified with carboxymethyl chitosan (CMC), followed by conjugation of hyaluronic acid (HA) and fluorescein isothiocyanate (FI). The resulting GO-CMC-FI-HA conjugate was characterized and used as a carrier to encapsulate the anticancer drug doxorubicin (DOX) to study in vitro release behavior.

Facile fabrication of P(OVNG-co-NVCL) thermoresponsive double-hydrophilic glycopolymer nanofibers for sustained drug release.

The thermoresponsive double-hydrophilic glycopolymer (DHG), Poly (6-O-vinyl-nonanedioyl-D-galactose-co-N-vinylcaprolactam) (P(OVNG-co-NVCL)) was synthesized via a chemo-enzymatic process and a free radical copolymerization and the resulting nanofibers were fabricated using an electrospinning process. The desired lower critical solution temperature (LCST) between 32 and 40 °C of the DHG polymers was achieved by adjusting the molar fraction of galactose monomer in the copolymers during the synthesis. The thermoresponsive DHG polymers were found to have good cytocompatibility with Hela cells as determined by the MTT assay, and special recognition of the protein peanut agglutinin (PNA).

Effect of ultrasound on the extraction of total anthocyanins from Purple Majesty potato.

This study examined anthocyanin extraction using the application of ultrasound to raw freeze dried, microwaved and raw sliced Purple Majesty potato, a new pigmented potato variety rich in anthocyanins. A 20 kHz probe was used for the sonication at 3 different amplitudes (30%, 50% and 70%) and ethanol in water at different ratios (50:50 and 70:30 v/v) was used for the extraction. Anthocyanin extraction from raw freeze dried purple potato was optimal at an ethanol:water ratio (70:30; v/v) after 5 min of ultrasonication, while the least amount of anthocyanins was extracted from raw sliced potatoes.

Electrospun polyvinyl alcohol/carbon dioxide modified polyethyleneimine composite nanofiber scaffolds.

A novel biocompatible polyvinyl alcohol/carbon dioxide modified polyethyleneimine (PVA/PEI-CO2) composite nanofiber was fabricated by a green and facile protocol, which reduces the cytotoxicity of PEI through the surface modification of the PEI with CO2. The (13)C NMR spectrum, elemental analysis, and TGA show that CO2 has been incorporated in the PEI surface resulting in a relatively stable structure. The resulting PVA/PEI-CO2 composite nanofibers have been characterized by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), contact angle, and scanning electron microscopy (SEM).

A comparison of the use of vacuum metal deposition versus cyanoacrylate fuming for visualisation of fingermarks and grab impressions on fabrics.

Both vacuum metal deposition (VMD) and cyanoacrylate fuming (CAF) are techniques used to visualise latent fingermarks on smooth non-porous surfaces such as plastic and glass. VMD was initially investigated in the 1970s as to its effectiveness for visualising prints on fabrics, but was abandoned when radioactive sulphur dioxide was found to be more effective. However, interest in VMD was resurrected in the 1990s when CAF was also used routinely.

Visualisation of fingermarks and grab impressions on dark fabrics using silver vacuum metal deposition.

Vacuum metal deposition (VMD) involves the thermal evaporation of metal (silver) in a vacuum, resulting in a uniform layer being deposited on the specimen being treated. This paper examines the use of silver on dark fabrics, thus offering a simpler operation and more obvious colouration to that of the traditional use of gold and zinc metals which must be evaporated separately. The aim of this study was to investigate the effect of fabric type, donor, mark age and method of fingermark deposition on the quality of marks visualised using silver VMD.

Comparison of hydroxyl radical formation in aqueous solutions at different ultrasound frequencies and powers using the salicylic acid dosimeter.

Ultrasonic frequencies of 20kHz, 382kHz, 584kHz, 862kHz (and 998kHz) have been compared with regard to energy output and hydroxyl radical formation utilising the salicylic acid dosimeter. The 862kHz frequency inputs 6 times the number of Watts into water, as measured by calorimetry, with the other frequencies having roughly the same value under very similar conditions. A plausible explanation involving acoustic fountain formation is proposed although enhanced coupling between this frequency and water cannot be discounted.

Removal of blue-green algae using the hybrid method of hydrodynamic cavitation and ozonation.

A suspension of Microcystis aeruginosa (30 μg L(-1)chlorophyll a) was circulated in a hydrodynamic cavitation device and ozone was introduced at the suction side of the pump. The removal of algae over 10 min using hydrodynamic cavitation alone and ozone alone is less than 15% and 35%, respectively. The destruction of algae rises significantly from 24% in the absence of the orifice to 91% with the optimized orifice on 5 min of processing using hydrodynamic cavitation along with ozone (HC/O(3)) and the utilization of ozone increases from 32% to 61%.

Stimulation of bioprocesses by ultrasound.

Ultrasound (US) has become a ubiquitous technological process in a large variety of scientific disciplines. However, little information exists on the use of ultrasound to enhance biological processes and/or processing and consequently this paper provides an overview of work reported to date on this topic. This review provides a brief introduction to ultrasound and the history of ultrasound as applied to bioprocesses.

Visualisation of fingermarks and grab impressions on fabrics. Part 1: gold/zinc vacuum metal deposition.

Vacuum metal deposition (VMD) is a highly sensitive technique originally introduced for detecting latent fingermarks on smooth non-porous surfaces such as carrier bags, plastics and glass. The current study explores whether VMD can be used in the examination of clothing from physical and sexual assault cases in order to visualise identifiable fingermark ridge detail and/or palmar flexion crease detail, thus allowing potential areas to be indicated for DNA swabbing and/or to determine the sequence of events. Four different fabrics were utilised during this study - nylon, polyester, polycotton and cotton, along with 15 donors who ranged in their age and propensity to leave fingermarks, from good to medium to poor as determined by results obtained from test runs using paper and plastic carrier bags processed with VMD.

Activated carbon cloth: a potential adsorbing/oxidizing catalyst for phenolic wastewater.

An investigation into the use of activated carbon cloth (ACC) as a potential adsorbent and/or catalyst for oxidation processes is reported. The extent of increase/decrease of oxidation/adsorption of phenol, as measured by total organic carbon content (%), is explained by considering the effects of the oxidants such as ozone and hydrogen peroxide on the activated carbon cloth. Results also show that acid pH enhances the catalytic decomposition of H(2)O(2) to hydroxyl radicals, increasing TOC removal from 16 to 55% as a result of oxidation of phenol in addition to adsorption on the ACC surface.

Mineralisation of 2,4-dichlorophenoxyacetic acid by acoustic or hydrodynamic cavitation in conjunction with the advanced Fenton process.

The mineralisation of 2,4-dichlorophenoxyacetic acid (2,4-D) in the presence of zero-valent iron and hydrogen peroxide (the advanced Fenton process--AFP) whilst being subjected to acoustic or hydrodynamic cavitation is reported. If the reaction is merely stirred then there is 57% removal of TOC whilst on irradiation the figure is 64% although the latter reaction is more rapid. Use of ultrasound alone results in only 11% TOC removal in 60 min of treatment time.