Two-photon fluorescence lifetime for label-free microfluidic droplet sorting.

Microfluidic droplet sorting systems facilitate automated selective micromanipulation of compartmentalized micro- and nano-entities in a fluidic stream. Current state-of-the-art droplet sorting systems mainly rely on fluorescence detection in the visible range with the drawback that pre-labeling steps are required. This limits the application range significantly, and there is a high demand for alternative, label-free methods.

Multiple Heart-Cutting Two-Dimensional Chip-HPLC Combined with Deep-UV Fluorescence and Mass Spectrometric Detection.

In this work, we introduce a new two-dimensional chip-based high-performance liquid chromatography (2D chip-HPLC) approach, which enables multiple transfers from the first dimension effluent onto the column head of the second separation dimension. By merging injection, separation, and detection features on a fused silica chip in a dead volume-free manner, all extra-column peak dispersion effects can be reduced to an absolute minimum. The application of intrinsic fluorescence detection with excitation in the deep-UV spectral region and electrospray ionization mass spectrometry after the first and second separation dimension, respectively, enables the label-free analysis of complex samples, as exemplarily shown for a pesticide mixture and a tryptic digest.

A microfluidic device enabling surface-enhanced Raman spectroscopy at chip-integrated multifunctional nanoporous membranes.

A three-dimensional microfluidic chip that combines sample manipulation and SERS detection on-chip was developed. This was successfully achieved by chip integration of a nanoporous polycarbonate track-etched (PCTE) membrane which connects microfluidic channels on two different levels with each other. The membrane fulfills two functions at the same time.

Nonaqueous Micro Free-Flow Electrophoresis for Continuous Separation of Reaction Mixtures in Organic Media.

The continuous separation mechanism of micro free-flow electrophoresis (μFFE) is a straightforward, suitable tool for microscale purification of reaction mixtures. However, aqueous separation buffers and organic reaction solvents limit the applicability of this promising combination. Herein, we have explored nonaqueous micro free-flow electrophoresis for this purpose and present its suitability for a continuous workup of organic reactions performed in acetonitrile.

Supercritical-Fluid Chromatography On-Chip with Two-Photon-Excited-Fluorescence Detection for High-Speed Chiral Separations.

Herein, we present the first example of microchip-based supercritical-fluid chromatography (SFC). A microfluidic-glass-chip platform with pressure and temperature control for fast and efficient on-column injection is described. This enabled fast and efficient separation of chiral and achiral compounds within seconds and also employed two-photon-excitated-fluorescence detection.

Fluorescence lifetime-activated droplet sorting in microfluidic chip systems.

We present a highly efficient microfluidic fluorescence lifetime-activated droplet sorting (FLADS) approach as a novel technology for droplet manipulation in lab-on-a-chip devices. In a proof-of-concept study, we successfully applied the approach to sort droplets containing two different fluorescent compounds on the basis of their corresponding fluorescence lifetime. Towards this end, a technical set-up was developed enabling on-the-fly fluorescence lifetime determination of passing droplets.

Thermomechanical processing of In-containing β-type Ti-Nb alloys.

In this study, the effect of thermomechanical processing on microstructure evolution of the indium-containing β-type Ti alloys (Ti-40Nb)-3.5In and (Ti-36Nb)-3.5In was examined.

Two-photon excitation in chip electrophoresis enabling label-free fluorescence detection in non-UV transparent full-body polymer chips.

One of the most commonly employed detection methods in microfluidic research is fluorescence detection, due to its ease of integration and excellent sensitivity. Many analytes though do not show luminescence when excited in the visible light spectrum, require suitable dyes. Deep-ultraviolet (UV) excitation (<300 nm) allows label-free detection of a broader range of analytes but also mandates the use of expensive fused silica glass, which is transparent to UV light.

Rapid prototyping of electrochromatography chips for improved two-photon excited fluorescence detection.

In the present study, we introduce two-photon excitation at 532 nm for label-free fluorescence detection in chip electrochromatography. Two-photon excitation at 532 nm offers a promising alternative to one-photon excitation at 266 nm, as it enables the use of economic chip materials instead of fused silica. In order to demonstrate these benefits, one-photon and two-photon induced fluorescence detection are compared in different chip layouts and materials with respect to the achievable sensitivity in the detection of polycyclic aromatic hydrocarbons (PAHs).

Label-free fluorescence detection of aromatic compounds in chip electrophoresis applying two-photon excitation and time-correlated single-photon counting.

In this study, we introduce time-resolved fluorescence detection with two-photon excitation at 532 nm for label-free analyte determination in microchip electrophoresis. In the developed method, information about analyte fluorescence lifetimes is collected by time-correlated single-photon counting, improving reliable peak assignment in electrophoretic separations. The determined limits of detection for serotonin, propranolol, and tryptophan were 51, 37, and 280 nM, respectively, using microfluidic chips made of fused silica.

State variables monitoring by in situ multi-wavelength fluorescence spectroscopy in heterologous protein production by Pichia pastoris.

State variables throughout non-induced and induced cultivations of Pichia pastoris for the heterologous Rhizopus oryzae lipase (ROL) production were monitored with a multi-wavelength on-line fluorescence sensor. Based on this work, the use of in situ multi-wavelength fluorometry combined with chemometrics models (PLS-1 models) provided a quantitative prediction of biomass and substrates (glycerol and methanol) during non-induced and induced ROL production. The mean prediction errors for both variables were about 7% and 10%, respectively.