Operando Investigation of WS Gas Sensors: Simultaneous Ambient Pressure X-ray Photoelectron Spectroscopy and Electrical Characterization in Unveiling Sensing Mechanisms during Toxic Gas Exposure.

Ambient pressure X-ray photoelectron spectroscopy (APXPS) is combined with simultaneous electrical measurements and supported by density functional theory calculations to investigate the sensing mechanism of tungsten disulfide (WS)-based gas sensors in an dynamic experiment. This approach allows for the direct correlation between changes in the surface potential and the resistivity of the WS sensing active layer under realistic operating conditions. Focusing on the toxic gases NO and NH, we concurrently demonstrate the distinct chemical interactions between oxidizing or reducing agents and the WS active layer and their effect on the sensor response.

One-step synthesis of photoluminescent nanofluids by direct loading of reactively sputtered cubic ZrN nanoparticles into organic liquids.

ZrN nanofluids may exhibit unique optoelectronic properties because of the matching of the solar spectrum with interband transitions and localized surface plasmon resonance (LSPR). Nevertheless, these nanofluids have scarcely been investigated, mainly because of the complexity of the current synthetic routes that involve aggressive chemicals and high temperatures. This work aims to validate reactive dc magnetron sputtering of zirconium in Ar/N as an environmentally benign, annealing-free method to produce 22 nm-sized, highly crystalline, stoichiometric, electrically conductive, and plasmonic ZrN nanoparticles (NPs) of cubic shape and to load them into vacuum-compatible liquids of different chemical compositions (polyethylene glycol (PEG), paraffin, and pentaphenyl trimethyl trisiloxane (PTT)) in one step.

Polar Polymorphism: A New Intermediate Structure toward the Thin-Film Phase in Asymmetric Benzothieno[3,2-][1]-benzothiophene Derivatives.

Understanding structure and polymorphism is relevant for any organic device optimization, and it is of particular relevance in 7-decyl-2-phenyl[1]benzothieno[3,2-][1]benzothiophene (Ph-BTBT-10) since high carrier mobility in Ph-BTBT-10 thin films has been linked to the structural transformation from the metastable thin-film phase to the thermodynamically stable bilayer structure via thermal annealing. We combine here a systematic nanoscale morphological analysis with local Kelvin probe force microcopy (KPFM) that demonstrates the formation of a polar polymorph in thin films as an intermediate structure for thicknesses lower than 20 nm. The polar structure develops with thickness a variable amount of structural defects in the form of individual flipped molecules (point defects) or sizable polar domains, and evolves toward the reported nonpolar thin-film phase.

Plasmonic Ag/Cu/PEG nanofluids prepared when solids meet liquids in the gas phase.

Since the time of Faraday's experiments, the optical response of plasmonic nanofluids has been tailored by the shape, size, concentration, and material of nanoparticles (NPs), or by mixing different types of NPs. To date, water-based liquids have been the most extensively investigated host media, while polymers, such as poly(ethylene glycol) (PEG), have frequently been added to introduce repulsive steric interactions and protect NPs from agglomeration. Here, we introduce an inverse system of non-aqueous nanofluids, in which Ag and Cu NPs are dispersed in PEG (400 g mol), with no solvents or chemicals involved.

Insights into the growth of nanoparticles in liquid polyol by thermal annealing.

We report on the growth of metal- and metal-oxide based nanoparticles (NPs) in heated polyol solutions. For this purpose, NPs are produced by the sputtering of a silver, gold, or a copper target to produce either silver, gold, or copper oxide NPs in pentaerythritol ethoxylate (PEEL) which has been annealed up to 200 °C. The objective of the annealing step is the fine modulation of their size.

Challenges for Incorporating Optical Switchability in Organic-Based Electronic Devices.

Transistors operate by controlling the current flowing from a source to a drain electrode via a third electrode (gate), thus giving access to a binary treatment (ON/OFF or 0/1) of the signal currently exploited in microelectronics. Introducing a second independent lever to modulate the current would allow for more complex logic functions amenable to a single electronic component and hence to new opportunities for advanced electrical signal processing. One avenue is to add this second dimension with light by incorporating photochromic molecules in current organic-based electronic devices.

Enhanced Adhesion Energy at Oxide/Ag Interfaces for Low-Emissivity Glasses: Theoretical Insight into Doping and Vacancy Effects.

Low-emissivity glasses rely on multistacked architectures with a thin silver layer sandwiched between oxide layers. The mechanical stability of the silver/oxide interfaces is a critical parameter that must be maximized. Here, we demonstrate by means of quantum-chemical calculations that a low work of adhesion at interfaces can be significantly increased doping and by introducing vacancies in the oxide layer.

Co-sputtering of gold and copper onto liquids: a route towards the production of porous gold nanoparticles.

Effective methods for the synthesis of high-purity nanoparticles (NPs) have been extensively studied for a few decades. Among others, cold plasma-based sputtering metals onto a liquid substrate appears to be a very promising technique for the synthesis of high-purity NPs. The process enables the production of very small NPs without using any toxic reagents and complex chemical synthesis routes, and enables the synthesis of alloy NPs which can be the first step towards the formation of porous NPs.

Theoretical characterization of the electronic properties of heterogeneous vertical stacks of 2D metal dichalcogenides containing one doped layer.

The rise of van der Waals hetero-structures based on transition metal dichalcogenides (TMDs) opens the door to a new generation of optoelectronic devices. A key factor controlling the operation and performance of such devices is the relative alignment of the band edges of the components. The electronic properties of the layers can be further modulated by chemical doping, typically leading to the introduction of gap states.

Tuning Spin Current Injection at Ferromagnet-Nonmagnet Interfaces by Molecular Design.

There is a growing interest in utilizing the distinctive material properties of organic semiconductors for spintronic applications. Here, we explore the injection of pure spin current from Permalloy into a small molecule system based on dinaphtho[2,3-b:2,3-f]thieno[3,2-b]thiophene (DNTT) at ferromagnetic resonance. The unique tunability of organic materials by molecular design allows us to study the impact of interfacial properties on the spin injection efficiency systematically.

Graphene Meets Ionic Liquids: Fermi Level Engineering via Electrostatic Forces.

Graphene-based two-dimensional (2D) materials are promising candidates for a number of different energy applications. A particularly interesting one is in next generation supercapacitors, where graphene is being explored as an electrode material in combination with room temperature ionic liquids (ILs) as electrolytes. Because the amount of energy that can be stored in such supercapacitors critically depends on the electrode-electrolyte interface, there is considerable interest in understanding the structure and properties of the graphene/IL interface.

Hierarchical self-assembly of enantiopure and racemic helicenes at the liquid/solid interface: from 2D to 3D.

The performance of organic nanostructures is closely related to the organization of the functional molecules. Frequently, molecular chirality plays a central role in the way molecules assemble at the supramolecular level. Herein we report the hierarchical self-assembly of benzo-fused tetrathia[7]helicenes on solid surfaces, from a single surface-bound molecule to well-defined microstructures, using a combination of various characterization techniques assisted by molecular modeling simulations.

Influence of the nature of the anchoring group on electron injection processes at dye-titania interfaces.

We report (time-dependent) density functional theory calculations characterizing the changes in the electronic and optical properties of oligothiophene dyes when grafted on a titania surface via a carboxylic acid or catechol moiety as anchoring group, in relation to their use in dye-sensitized solar cells. The broadening of the LUMO level of the compounds upon adsorption has been extracted from the computed electronic structures and used to estimate electron injection times into the conduction band of the oxide. The strongly coupled carboxylic-containing dyes lead to faster electron injection times compared to catechol-substituted dyes.

Which Oxide for Low-Emissivity Glasses? First-Principles Modeling of Silver Adhesion.

Density functional theory (DFT) calculations were performed to assess the work of adhesion of silver layers deposited on metal oxide surfaces differing by their chemical nature (ZnO, TiO, SnO, and ZrO) and their crystallographic face. The calculated work of adhesion values range from ∼0 to 3 J m and are shown to originate from the interplay between ionic (associated with charge transfer at the interface) and covalent (as probed by atomic bond orders between silver and the metal oxide atoms) interactions. The results are discussed in the context of the design of silver/metal oxide interfaces for low-emissivity glasses.

Defect-driven interfacial electronic structures at an organic/metal-oxide semiconductor heterojunction.

The electronic structure of the hybrid interface between ZnO and the prototypical organic semiconductor PTCDI is investigated via a combination of ultraviolet and X-ray photoelectron spectroscopy (UPS/XPS) and density functional theory (DFT) calculations. The interfacial electronic interactions lead to a large interface dipole due to substantial charge transfer from ZnO to 3,4,9,10-perylenetetracarboxylicdiimide (PTCDI), which can be properly described only when accounting for surface defects that confer ZnO its n-type properties.

Work function modification of the (111) gold surface covered by long alkanethiol-based self-assembled monolayers.

Many recent experimental studies have demonstrated that the deposition of self-assembled monolayers on a metal electrode can significantly modulate its work function and hence charge injection properties in organic-based devices. In this context, we model here by means of Density Functional Theory (DFT) calculations the deposition of long saturated and partially fluorinated alkanethiol chains on the gold (111) surface and explore the shift in the work function while changing the size and degree of fluorination of the molecular backbone in order to contribute to the definition of design rules. Among all the derivatization schemes, only the introduction of a terminal fluoromethyl unit leads to an appreciable change in the work function shift, further accompanied by a reversal of its sign.

Work-function modification of Au and Ag surfaces upon deposition of self-assembled monolayers: influence of the choice of the theoretical approach and the thiol decomposition scheme.

We have characterized theoretically the work-function modifications of the (111) surfaces of gold and silver upon deposition of self-assembled monolayers based on methanethiol and trifluoromethanethiol. A comparative analysis is made between the experimental results and those obtained from two widely used approaches based on density functional theory. The contributions to the total work-function modifications are estimated on the basis of two decomposition schemes of the thiol molecules that have been proposed in the literature.

Self-assembly of an asymmetrically functionalized [6]helicene at liquid/solid interfaces.

STM brings to light chirality aspects of the self-assembly of a functionalized helicene at the interface between a liquid and the solid substrates, gold and graphite. This reveals conditions for conglomerate formation.

Large work function shift of gold induced by a novel perfluorinated azobenzene-based self-assembled monolayer.

Tune it with light! Self-assembled monolayers on gold based on a chemisorbed novel azobenzene derivative with a perfluorinated terminal phenyl ring are prepared. The modified substrate shows a significant work function increase compared to the bare metal. The photo-conversion between trans and cis isomers chemisorbed on the surface shows great perspectives for being an accessible route to tune the gold properties by means of light.

Noncovalent interactions between ([18]crown-6)-tetracarboxylic acid and amino acids: electrospray-ionization mass spectrometry investigation of the chiral-recognition processes.

Chiral recognition of enantiomers by host compounds is one of the most challenging topics in modern host-guest chemistry. Amongst the well-established methods, mass spectrometry (MS) is increasingly used nowadays, due to its low detection limit, short analysis time, and suitability for analyzing mixtures and for studying chiral effects in the gas phase. The development of electrospray-ionization (ESI) techniques provides an invaluable tool to study, in the gas phase, diastereoisomeric complex ions prepared from enantiomer ions and a chiral selector.