Unilateral cleft lip and palate patients present cranial base modifications: a cross-sectional study.

The aim of this cross-sectional study was to perform a three-dimensional (3D) assessment of the cranial base of patients with unilateral cleft lip and palate (UCLP). Cone-beam computed tomography (CBCT) scans of 52 UCLP patients (21 females and 31 males; mean age, 10.0 ± 2.

Three-dimensional assessment of mandibular asymmetry in patients with unilateral cleft lip and palate at different growth stages: a cross-sectional study.

Introduction: The early diagnosis of mandibular asymmetry (MA) in patients with unilateral cleft lip and palate (UCLP) can contribute to its treatment.

Objective: The aim of this study was to evaluate the occurrence and the extent of MA in UCLP patients at different growth stages.

Methods: Cone-beam computed tomography (CBCT) of 47 UCLP patients were included, and divided into two groups (prepubertal stage and pubertal stage).

Effect of treatment of transverse maxillary deficiency using rapid palatal expansion on oral health-related quality of life in children: complementary results for a controlled clinical trial.

Objective: To evaluate the effect of rapid palatal expansion (RPE) using Haas-type expanders on children's oral health-related quality of life (OHRQOL) and compare said effect with that previously reported for the use of Hyrax-type expanders.

Materials And Methods: Forty participants aged 8-10 years with transverse maxillary deficiency were treated using Haas appliances. OHRQOL was measured using the CPQ before RPE, during RPE (T), at the end of RPE (T), and 1 month after appliance removal (T).

The effect of micro-osteoperforations on the rate of maxillary incisors' retraction in orthodontic space closure: a randomized controlled clinical trial.

Background: This single-centered randomized controlled clinical trial aimed to evaluate the effectiveness of micro-osteoperforations (MOPs) in accelerating the orthodontic retraction of maxillary incisors.

Methods: Forty-two patients aged 16-40 were recruited and randomly assigned into two groups, one which underwent MOPs (MOPG) in the buccal and palatal region of all maxillary incisors immediately before the start of retraction and one which did not (CG). Eligibility criteria included the orthodontic need for maxillary first premolars extraction and space closure in two phases.

Craniofacial morphology of patients with unilateral cleft lip and palate at two stages of skeletal maturation.

The aim of this retrospective cross-sectional investigation was to perform a 3D analysis of craniofacial morphology of patients with unilateral cleft lip and palate (UCLP) at two stages of skeletal maturation. Cone-beam computed tomography (CBCT) scans of 52 UCLP patients (34 prepubertal; 18 pubertal) were collected from an outpatient referral center for the treatment of craniofacial deformities. In total 15 multiplanar craniofacial landmarks were identified, 3D virtual surface models were created, and 13 variables were measured to assess the 3D Euclidean distances between landmarks and spatial position of the landmarks in the projected X, Y and Z components.

Does surgically assisted maxillary expansion improve obstructive sleep apnoea in adults? A systematic review and meta-analysis.

Introduction The aim of this systematic review and meta-analysis was to evaluate the effects of maxillary expansion on adults with obstructive sleep apnoea (OSA).Methods Electronic searches up to July 2021 in eight electronic databases were conducted. Study selection, data extraction, risk of bias evaluation using ROBINS-I, quality of evidence assessment using GRADE and meta-analyses were performed.

Information and Communications Technology in Dentistry: an informative and educational approach for patients with fixed orthodontic appliances.

Objective: To develop and make available, at no cost to the user, Information and Communications Technology (ICT) tools for Dentistry, providing dental information and advice geared toward patients undergoing orthodontic treatment with fixed appliances.

Material And Methods: A Dentistry-based content that contemplated information and advice concerning orthodontic treatment with fixed appliances was elaborated. The materials, which included instructions on oral hygiene and treatment strategies when faced with possible complications, were evaluated and validated by specialists, whose assessments reached a 85% approval.

Orthodontic retreatment: positive effects on the patient's self-esteem and quality of life.

Introduction: An increasing percentage of the world's population has had access to orthodontic treatment within the last few decades. Consequently, a larger number of patients seeking for correction of their malocclusions, nowadays, present with a history of previous orthodontic therapy. Orthodontists performing retreatments in their practice may have to face additional difficulties, and one of them is treating individuals that may be even more demanding for excellent results and efficient treatments.

Dehiscence and buccal bone thickness after rapid maxillary expansion in young patients with unilateral cleft lip and palate.

Introduction: The present study aimed to evaluate the consequences of rapid maxillary expansion in the buccal bone thickness and dehiscence of subjects with unilateral cleft lip and palate.

Methods: This prospective cohort study consisted of 30 participants, 20 males and 10 females, between 8 and 15 years old. Participants were allocated into 3 groups, according to the type of maxillary constriction, and were treated with different types of expanders: G1, hyrax; G2, fan-type; G3, inverted mini-hyrax.

The effects of corticotomy and piezocision in orthodontic canine retraction: a randomized controlled clinical trial.

Background: The aims of this study were to evaluate the efficacy of alveolar corticotomy (AC) and piezocision (PZ) in accelerating maxillary canine retraction, and their effects on multiple bone remodeling expression in gingival crevicular fluid (GCF). A split-mouth, randomized controlled clinical trial was performed at the Department of Orthodontics of Pontifical Catholic University of Minas Gerais, Brazil. Eligibility criteria included orthodontic need for first maxillary premolars extractions, followed by canine retraction.

Mini Hyrax vs Hyrax expanders in the rapid palatal expansion in adolescents with posterior crossbite: a randomized controlled clinical trial.

Purpose: The aim of this study was to compare the dental effects, impact on quality of life, and pain perception of adolescents wearing Mini Hyrax and Hyrax expanders in rapid palatal expansion.

Methods: Thirty-four adolescents aged 11 to 16 years, with maxillary transverse deficiency (unilateral or bilateral posterior crossbite), were randomly allocated into two groups, Mini Hyrax group and Hyrax group (1:1 ratio). Dental effects were evaluated by digitally superimposed pretreatment and postretention three-dimensional intraoral scans on the palatal rugaes using the software 3DSlicer.

The effect of social media on patient acceptance of temporary anchorage devices.

Objectives: To investigate the relationship between the use of social networking sites (SNSs) on patient perceptions, acceptance, and expectations of treatment using temporary anchorage devices (TADs) and to compare differences between patients from the United Kingdom and Brazil.

Materials And Methods: Cross-sectional questionnaires were administered to 39 participants at orthodontic practices in the United Kingdom and Brazil about patients' use of SNSs, exposure to TADs on SNSs, and thoughts on extractions, jaw surgery, or TADs as treatment options.

Results: UK patients prefer for clinicians to have SNS profiles (P = .

Three-dimensional nasal septum and maxillary changes following rapid maxillary expansion in patients with cleft lip and palate.

Objectives: To determine the three-dimensional changes of the nasal septum (NS), alveolar width, alveolar cleft volume, and maxillary basal bone following rapid maxillary expansion (RME) in consecutive patients with unilateral cleft lip and palate (UCLP).

Materials And Methods: A retrospective investigation was conducted based on the analysis of cone-beam computed tomography (CBCT) data of 40 consecutive patients with UCLP (mean age 11.1 ± 2.

Does dental trauma and its consequences influence the professional hiring process? Development, validation and application of an assessment tool.

Objectives: To develop and validate a questionnaire concerning the aspects evaluated during the hiring process by human resources professionals (HRPs); to apply the validated questionnaire; and to evaluate the perceptions and judgment of HRPs regarding different traumatic dental injuries (TDIs) and their consequences (TDI-Cs).

Materials And Methods: The acceptability, discriminative properties, internal consistency and test-retest reliability of the developed questionnaire were evaluated, using the same methodology as the main study and adopting a pilot sample. For both the validation process and the application phase, images of one male and one female were manipulated, or not (control), to create different types of TDI (enamel fracture, enamel and dentin fracture, avulsion) and TDI-Cs (crown discoloration, tooth loss due to avulsion).

Viability of Maxillary Single Crowns Supported by 4-mm Short Implants: A Finite Element Study.

Purpose: Short implants are increasingly being used in posterior regions to avoid grafting procedures and their related risks, costs, and morbidity. However, studies focusing on implants measuring less than 6 mm long remain scarce, and the literature does not yet have a definition of the limits inherent with their use. This study attempts to investigate whether extra-short 4-mm implants are capable of receiving a maxillary single crown.

Long-term stability of a Class III malocclusion with severe anterior open bite and bilateral posterior crossbite in a hyperdivergent patient.

Anterior open bite malocclusion is generally associated with several causes. This case report describes the 2-phase treatment of a 13-year-old boy with a Class III malocclusion, severe anterior open bite, and bilateral posterior crossbite treated without surgical intervention. An orthopedic approach was performed in phase 1 with a hyrax-type palatal expander, followed by maxillary protraction with a facemask for a 10-month period to promote the correction of transverse and sagittal deviations.

Evaluation of Different Heights of Prosthetic Crowns Supported by an Ultra-Short Implant Using Three-Dimensional Finite Element Analysis.

Purpose: To apply finite element analysis (FEA) to investigate the stress distribution in a 4-mm-high ultrashort implant when supporting crowns of different heights in order to test the possibility of using this implant unitarily in the posterior edentulous mandible.

Materials And Methods: Three models of atrophic mandibles were created (M1, M2, and M3). Each model contained a 4-mm-length implant of a titanium-zirconium alloy, screw-type with internal connection, supporting nonsplinted screwed-in crowns of 10, 12.

Bond Strength and Failure Pattern of Orthodontic Tubes Adhered to a Zirconia Surface Submitted to Different Modes of Application of a Ceramic Primer.

The aim of this study was to evaluate the shear bond strength of orthodontic tubes adhered to ceramics with the Transbond™ XT bonding resin (3M, Maplewood, MN, USA) while varying the surface treatment. Then, the adhesive remaining index (ARI) was verified, and the representative fracture patterns were evaluated via scanning electron microscopy. Forty-eight zirconia blocks were divided into three groups, varying the number of layers of the 10-methacryloyloxy-decyl dihydrogen phosphate (MDP) primer: one, two, or three applications.

Pure Mandibular Incisor Intrusion: A Finite Element Study to Evaluate the Segmented Arch Technique.

Leveling the curve of Spee is a commonly-used strategy to correct deep bites. Although several techniques have been proposed to intrude mandibular incisors (MI), flaring of these teeth is often observed and in many instances undesired. A three-dimensional (3D) finite element model (FEM) was used to locate the ideal point of force application (PFA) to achieve pure MI intrusion with the three-piece arches' technique.

Successful and stable orthodontic camouflage of a mandibular asymmetry with sliding jigs.

The purpose of this paper is to present and discuss a simple and low-cost clinical approach to correct an asymmetric skeletal Class III combined to an extensive dental open bite that significantly compromised the occlusal function and smile aesthetics of an adult male patient. The patient did not accept the idealistic surgical-orthodontic treatment option, neither the use of temporary anchorage devices to facilitate the camouflage of the asymmetrical skeletal Class III/open bite. Therefore, a very simple and inexpensive biomechanical approach using sliding jigs in the mandibular arch was implemented as the compensatory treatment of the malocclusion.

Plaque index and gingival index during rapid maxillary expansion of patients with unilateral cleft lip and palate.

Objective: To assess, during rapid maxillary expansion, the plaque index (PI) and the gingival index (GI) of patients with unilateral cleft lip and palate(UCLP) using Hyrax (HX) or inverted mini-Hyrax (IMHX) rapid maxillary expanders (RME) considering patients' sex and age.

Methods: PI (Quigley Index modified by Turesky et al) and GI (Löe and Silness) of 28 UCLP (11 females; 17 males: aged 8 to 15 years) submitted to daily RME activation were assessed before (T0) and 7 (T1), 28 (T2) and 90 (T3) days after activation. Log-linear models and Bonferroni correction were performed to analyze possible differences in PI and GI between RME, sexes or age groups over time.

Long-term Stability of a Camouflage Retreatment of an Asymmetric Class III/Posterior Open Bite Using Sliding Jigs.

This article reports the camouflage retreatment of an adult patient presenting an asymmetric Class III malocclusion and posterior open bite. Sliding jigs (SJs) associated with intermaxillary elastics were used. The long-term stability of the excellent results suggests that the use of SJs to correct asymmetric posterior occlusions may be effective.

The impact of rapid maxillary expansion on maxillary first molar root morphology of cleft subjects.

Objectives: The aim of this prospective cohort study was to determine the effects of rapid maxillary expansion (RME) on the first molar roots of cleft lip and palate subjects along different root development stages.

Materials And Methods: Thirty participants with unilateral cleft lip and palate were divided into three groups (n = 10), according to the type of expander used: Hyrax, iMini and Fan-type. A cone beam CT scan was performed before (T1) and 3 months after stabilization of the appliance (T2).

Do you know this syndrome? Leopard syndrome.

Hypertrophic cardiomyopathy is known as Leopard syndrome, which is a mnemonic rule for multiple lentigines (L), electrocardiographic conduction abnormalities (E), ocular hypertelorism (O), pulmonary stenosis (P), abnormalities of genitalia (A), retardation of growth (R), and deafness (D). We report the case of a 12-year-old patient with some of the abovementioned characteristics: hypertelorism, macroglossia, lentigines, hypospadias, cryptorchidism, subaortic stenosis, growth retardation, and hearing impairment. Due to this set of symptoms, we diagnosed Leopard syndrome.