Synthesis, Characterization, and Evaluation of the Antimicrobial Effects and Cytotoxicity of a Novel Nanocomposite Based on Polyamide 6 and Trimetaphosphate Nanoparticles Decorated with Silver Nanoparticles.

This study aimed to develop a polymeric matrix of polyamide-6 (P6) impregnated with trimetaphosphate (TMP) nanoparticles and silver nanoparticles (AgNPs), and to evaluate its antimicrobial activity, surface free energy, TMP and Ag release, and cytotoxicity for use as a support in dental tissue. The data were subjected to statistical analysis ( < 0.05).

Side-stream lignins: Potential antioxidant and antimicrobial agents in milk.

In recent years, lignin has drawn increasing attention due to its intrinsic antibacterial and antioxidant activities, biodegradability, and biocompatibility. Yet, like several other biogenic structures, its compositional heterogeneity represents a challenge to overcome. In addition, there are few studies regarding food applications of lignin.

Multifunctional bilayer membranes composed of poly(lactic acid), beta-chitin whiskers and silver nanoparticles for wound dressing applications.

Nanomaterial-based wound dressings have been extensively studied for the treatment of both minor and life-threatening tissue injuries. These wound dressings must possess several crucial characteristics, such as tissue compatibility, non-toxicity, appropriate biodegradability to facilitate wound healing, effective antibacterial activity to prevent infection, and adequate physical and mechanical strength to withstand repetitive dynamic forces that could potentially disrupt the healing process. Nevertheless, the development of nanostructured wound dressings that incorporate various functional micro- and nanomaterials in distinct architectures, each serving specific purposes, presents significant challenges.

Nanoarchitectonic E-Tongue of Electrospun Zein/Curcumin Carbon Dots for Detecting in Milk.

We report a nanoarchitectonic electronic tongue made with flexible electrodes coated with curcumin carbon dots and zein electrospun nanofibers, which could detect () in milk using electrical impedance spectroscopy. Electronic tongues are based on the global selectivity concept in which the electrical responses of distinct sensing units are combined to provide a unique pattern, which in this case allowed the detection of through non-specific interactions. The electronic tongue used here comprised 3 sensors with electrodes coated with zein nanofibers, carbon dots, and carbon dots with zein nanofibers.

Antimicrobial and Photoantimicrobial Activities of Chitosan/CNPPV Nanocomposites.

Multidrug-resistant bacteria represent a global health and economic burden that urgently calls for new technologies to combat bacterial antimicrobial resistance. Here, we developed novel nanocomposites (NCPs) based on chitosan that display different degrees of acetylation (DAs), and conjugated polymer cyano-substituted poly(-phenylene vinylene) (CNPPV) as an alternative approach to inactivate Gram-negative () and Gram-positive () bacteria. Chitosan's structure was confirmed through FT-Raman spectroscopy.

Combining Coaxial Electrospinning and 3D Printing: Design of Biodegradable Bilayered Membranes with Dual Drug Delivery Capability for Periodontitis Treatment.

Periodontitis is a chronic inflammatory disease that can lead to significant destruction of tooth-supporting tissues, compromising dental function and patient's health. Although the currently employed treatment approaches can limit the advance of the disease, the development of multifunctional and hierarchically structured materials is still in demand for achieving successful tissue regeneration. Here, we combine coaxial electrospinning and 3D printing techniques to prepare bilayered zein-based membranes as a potential dual drug delivery platform for periodontal tissue regeneration.

Insight into morphological, physicochemical and spectroscopic properties of β-chitin nanocrystalline structures.

We systematically investigated the effect of β-chitin (BCH) particle size on the preparation of nanocrystals/nanowhiskers (CWH) by acid hydrolysis. Regardless this variable, CWH aqueous suspension exhibited outstanding stability and the average degree of acetylation remained nearly constant after the acid treatment. In contrast, the morphology, dimensions, crystallinity, and molecular weight of CHW were significantly affect by the particle size.

N-(2-hydroxy)-propyl-3-trimethylammonium, O-palmitoyl chitosan: Synthesis, physicochemical and biological properties.

Two samples of N-(2-hydroxy)-propyl-3-trimethylammonium, O-palmitoyl chitosan (DPCat) with different average degrees of quaternization named as DPCat35 (DQ¯ = 35%) and DPCat80 (DQ¯ = 80%), were successfully synthesized by reacting glycidyltrimethylammonium chloride (GTMAC) with O-palmitoyl chitosan (DPCh) derivative (DS¯ = 12%). Such amphiphilic derivatives of chitosan were fully water-soluble at 1.0 < pH < 12.

Fast-forward approach of time-domain NMR relaxometry for solid-state chemistry of chitosan.

Chitosans with different average degrees of acetylation and weight molecular weight were analyzed by time-domain NMR relaxometry using the recently proposed pulse sequence named Rhim and Kessemeier - Radiofrequency Optimized Solid-Echo (RK-ROSE) to acquire H NMR signal of solid-state materials. The NMR signal decay was composed of faster (tenths of μs) and longer components, where the mobile-part fraction exhibited an effective relaxation transverse time assigned to methyl hydrogens from N-acetyl-d-glucosamine (GlcNAc) units. The higher intrinsic mobility of methyl groups was confirmed via DIPSHIFT experiments by probing the H-C dipolar interaction.

Tuning the properties of carboxymethylchitosan-based porous membranes for potential application as wound dressing.

Wound repair is a complex process that calls for strategies to allow a rapid and effective regeneration of injured skin, which has stimulated the research of advanced wound dressings. Herein, highly porous membranes of N,O-carboxymethylchitosan (CMCh), and poly (vinyl alcohol) (PVA) were successfully prepared via a green and facile freeze-drying method of blend solutions containing CMCh/PVA at weight ratio 25/75. Membranes composed only by CMCh were also prepared and genipin was used for crosslinking.

Advances in Functional Polymer Nanofibers: From Spinning Fabrication Techniques to Recent Biomedical Applications.

Functional polymeric micro-/nanofibers have emerged as promising materials for the construction of structures potentially useful in biomedical fields. Among all kinds of technologies to produce polymer fibers, spinning methods have gained considerable attention. Herein, we provide a recent review on advances in the design of micro- and nanofibrous platforms via spinning techniques for biomedical applications.

Impedimetric electronic tongue based on molybdenum disulfide and graphene oxide for monitoring antibiotics in liquid media.

Antibiotics are considered emerging pollutants which indiscriminate use has led to the development of antibiotic-resistant bacteria, while their improper disposal has caused adverse effects to the environment and human health. Thus, the development of devices or techniques capable of detecting antibiotics with high sensitivity, low detection limits, and reasonable cost becomes of prime importance. In this work, an electronic tongue (e-tongue) based on molybdenum disulfide (MoS) and graphene oxide (GO) was developed and employed to detect four distinct antibiotics, namely cloxacillin benzathine, erythromycin, streptomycin sulfate, and tetracycline hydrochloride.

Tracking Sulfonated Polystyrene Diffusion in a Chitosan/Carboxymethyl Cellulose Layer-by-Layer Film: Exploring the Internal Architecture of Nanocoatings.

Since chitosan presents the ability to interact with a wide range of molecules, it has been one of the most popular natural polymers for the construction of layer-by-layer thin films. In this study, depth-profiling X-ray photoelectron spectroscopy (XPS) was employed to track the diffusion of sulfonated polystyrene (SPS) in carboxymethyl cellulose/chitosan (CMC/Chi) multilayers. Our findings suggest that the CMC/Chi film does not constitute an electrostatic barrier sufficient to block diffusion of SPS, and that diffusion can be controlled by adjusting the diffusion time and the molecular weight of the polymers that compose the CMC/Chi system.

Soybean hulls: Optimization of the pulping and bleaching processes and carboxymethyl cellulose synthesis.

Soybean hulls, a co-product generated in high volumes, were used to obtain pulp and CMC. The pulping process was optimized with the aid of 1%, 2%, and 2.5% NaOH solutions at 90 °C for 2 h.

Core-sheath nanostructured chitosan-based nonwovens as a potential drug delivery system for periodontitis treatment.

Core-sheath nanofibers were successfully prepared via coaxial electrospinning by using chitosan with well-defined structural characteristics as the shell layer and poly (vinyl alcohol) (PVA) containing tetracycline hydrochloride (TH) as the core layer. The effects of the average degree of deacetylation (DD‾) of chitosan and the post-electrospinning genipin crosslinking on physicochemical and biological properties of resulting nonwovens were evaluated. Defect-free and geometrically uniform nanofibers with diameters predominantly in the range of 100-300 nm were prepared, and transmission electron microscopy (TEM) revealed the core-sheath structures and its preservation after crosslinking.

Microwave irradiation to the rapid extraction of (Barbatimão) compounds by statistical planning.

is a typical tree from Brazilian Savanah used in medicine as an anti-inflammatory and antiseptic agent. It is secondary metabolites has biological activities, so the development of efficient extraction methods is essential. Microwave irradiation through assisted extraction is innovative and highly efficient for bioactive compounds.

Sorghum straw: Pulping and bleaching process optimization and synthesis of cellulose acetate.

The process employed for the pulping and bleaching of sorghum straw was optimized prior to the synthesis of cellulose acetate. A 2 factorial central composite design was carried out. The variables considered were cooking time (1.

Biodegradation of anthracene and different PAHs by a yellow laccase from Leucoagaricus gongylophorus.

Laccases produced by Leucoagaricus gongylophorus act in lignocellulose degradation and detoxification processes. Therefore, the use of L. gongylophorus laccase (Lac1Lg) was proposed in this work for degradation of anthracene and others polycyclic aromatic hydrocarbons without the use of mediators.

Characterization and physical-chemistry of methoxypoly(ethylene glycol)-g-chitosan.

Methoxypoly(ethyleneglycol)-graft-chitosan (PEG-g-Ch) was prepared by grafting polyethyleneglycol into chitosans (Ch) exhibiting different average degree of deacetylation (60% < DD¯ < 95%). H NMR showed that PEG-g-Ch derivatives presented high average degree of N-substitution (DS¯ ≈ 40%) and such derivatives exhibited full water solubility at 1.0 < pH < 11.

-(2-Hydroxy)-propyl-3-trimethylammonium, -Mysristoyl Chitosan Enhances the Solubility and Intestinal Permeability of Anticancer Curcumin.

An amphiphilic derivative of chitosan containing quaternary ammonium and myristoyl groups, herein named as ammonium myristoyl chitosan (DMCat), was synthesized by reacting glycidyltrimethylammonium chloride (GTMAC) and myristoyl chitosan (DMCh). The success of the modification was confirmed using Fourier-transform infrared spectroscopy (FTIR) and ¹H nuclear magnetic resonance (NMR) spectroscopy. The average degrees of alkylation and quaternization ( D Q ¯ ) were determined by using ¹H NMR and conductometric titration.

Nanostructured electrospun nonwovens of poly(ε-caprolactone)/quaternized chitosan for potential biomedical applications.

Blend solutions of poly(ε-caprolactone) (PCL) and N-(2-hydroxy)-propyl-3-trimethylammonium chitosan chloride (QCh) were successfully electrospun. The weight ratio PCL/QCh ranged in the interval 95/5-70/30 while two QCh samples were used, namely QCh1 (DQ¯ = 47.3%; DPv¯ = 2218) and QCh2 (DQ¯ = 71.

Investigation of the Internal Chemical Composition of Chitosan-Based LbL Films by Depth-Profiling X-ray Photoelectron Spectroscopy (XPS) Analysis.

Chitosan-based thin films were assembled using the layer-by-layer technique, and the axial composition was accessed using X-ray photoelectron spectroscopy with depth profiling. Chitosan (CHI) samples possessing different degrees of acetylation ([Formula: see text]) and molecular weight ([Formula: see text]) produced via the ultrasound-assisted deacetylation reaction were used in this study along with two different polyanions, namely, sodium polystyrenesulfonate (PSS) and carboxymethylcellulose (CMC). When chitosan, a positively charged polymer in aqueous acid medium, was combined with a strong polyanion (PSS), the total positive charge of chitosan, directly related to its [Formula: see text], was the key factor affecting the film formation.

PDLLA honeycomb-like scaffolds with a high loading of superhydrophilic graphene/multi-walled carbon nanotubes promote osteoblast in vitro functions and guided in vivo bone regeneration.

Herein, we developed honeycomb-like scaffolds by combining poly (d, l-lactic acid) (PDLLA) with a high amount of graphene/multi-walled carbon nanotube oxides (MWCNTO-GO, 50% w/w). From pristine multi-walled carbon nanotubes (MWCNT) powders, we produced MWCNTO-GO via oxygen plasma etching (OPE), which promoted their exfoliation and oxidation. Initially, we evaluated PDLLA and PDLLA/MWCNTO-GO scaffolds for tensile strength tests, cell adhesion and cell viability (with osteoblast-like MG-63 cells), alkaline phosphatase (ALP, a marker of osteoblast differentiation) activity and mineralized nodule formation.