Accurate low-dose exposure assessment of benzene and monoaromatic compounds by diffusive sampling: sampling and analytical method validation according to ISO 23320 for samplers packed with activated charcoal.

The research study aimed at providing an accurate low-dose benzene exposure assessment method, by validating diffusive monitoring techniques for benzene personal exposure measurements at workplaces where benzene concentrations are expected in the low ppb range, such as in the present-day chemical, petrochemical, foundry, and pharmaceutical industry. The project was aimed at addressing the need for a robust and fully validated method to perform personal exposure measurements considering that the occupational exposure limit value for benzene is going to be significantly lowered in the next few years. Diffusive sampling offers a reliable alternative to pumped sampling methods, intrinsic safety in potentially explosive atmospheres, lightness, and ease of use.

Occupational Exposure Assessment to Antineoplastic Drugs in Nine Italian Hospital Centers over a 5-Year Survey Program.

In the present study, surface contamination where antineoplastic drugs (ADs) are present was investigated, as occupational exposure risk is still an open debate. Despite recommendations and safety standard procedures being in place in health care settings, quantifiable levels of ADs are being reported in the recent literature. Thus, a survey monitoring program was conducted over five years (2016-2021) in nine Italian hospitals.

Development and Validation of a Bioanalytical UHPLC-MS/MS Method Applied to Murine Liver Tissue for the Determination of Indocyanine Green Loaded in H-Ferritin Nanoparticles.

Indocyanine green (ICG) is one of the most commonly used fluorophores in near-infrared fluorescence-guided techniques. However, the molecule is prone to form aggregates in saline solution with a limited photostability and a moderate fluorescence yield. ICG was thus formulated using protein-based nanoparticles of H-ferritin (HFn) in order to generate a new nanostructure, HFn-ICG.

Biomarkers of Low-Level Environmental Exposure to Benzene and Oxidative DNA Damage in Primary School Children in Sardinia, Italy.

Background: The main anthropic sources of exposure to airborne benzene include vehicular traffic, cigarette smoke, and industrial emissions.

Methods: To detect early genotoxic effects of environmental exposure to benzene, we monitored environmental, personal, and indoor airborne benzene in children living in an urban area and an area near a petrochemical plant. We also used urinary benzene and S-phenylmercapturic acid (S-PMA) as biomarkers of benzene exposure and urinary 8-hydroxydeoxyguanosine (8-OHdG) as a biomarker of early genotoxic effects.

[Serum polychlorinated biphenyls in workers of a second-smelting steel mill].

In the steel industry polychlorodibenzodioxins (PCDD), polychlorinated dibenzofurans (PCDF) and polychlorinated biphenyls (PCBs) may be present deriving from the fusion of ferrous and non-ferrous scrap, as well as for the thermal decomposition of the plastic materials (thermoplastic and thermosetting resins) contained therein and not removed before melting at high temperatures. The aim of the study was to assess in 52 workers of a secondmelting steel plant the PCBs exposure deriving from the manual handling of ferrous scrap waste eventually contaminated. The population was divided by production department (scrap, casting and office).

Development and validation of a simple and versatile method for the quantification of everolimus loaded in H-ferritin nanocages using UHPLC-MS/MS.

Everolimus (Eve) is an immunosuppressive macrolide that is being analyzed in various biological matrices and fluids. Its antitumor activity makes this drug suitable not only for organ transplantation but also for breast cancer treatments. In the attempt to reduce the incidence and severity of its side effects, Eve was loaded in H-ferritin (HFn), a natural biomolecule that is involved in specific cellular uptake pathways.

Occupational exposure to carbon fibers impregnated with epoxy resins and evaluation of their respirability.

The study aims to investigate occupational exposure to carbon fibers impregnated with epoxy resins (carbon fiber reinforced [CFR]) in workers at an airplane fuselage section construction plant, by environmental and biological monitoring. Determination of airborne CFR was done by environmental sampling with active samplers, 11 of which were stationary and 19 personal samplings. The subsequent analyses were performed in the scanning electron microscope fitted with an X-ray microanalysis system (SEM-EDXA).

Paclitaxel-Loaded Silk Fibroin Nanoparticles: Method Validation by UHPLC-MS/MS to Assess an Exogenous Approach to Load Cytotoxic Drugs.

The aim of this work was to load an anticancer drug, paclitaxel (PTX), on Silk Fibroin Nanoparticles (SFNs) by using an exogenous approach. SFNs were produced, freeze-dried and then loaded with PTX. An exogenous method allowed us to reduce both drug loss and environmental impact.

Validation of cleaning procedures used in an Italian Hospital Pharmacy for antineoplastic drug decontamination: a new tool for industrial hygiene.

Background: Current Italian regulations and procedures for surface decontamination of antineoplastic drugs (ADs) are not clear. Therefore, most hospital pharmacies follow internal procedures as an interpretation of the recommended handling guidelines.

Objectives: Our study compared 7 different cleaning procedures after controlled contamination of the work surface of a biological safety cabinet workbench in an Italian hospital oncology pharmacy (HOP) to determine which of them is more efficient and practical.

Exposure duration and absorbed dose assessment in pesticide-exposed agricultural workers: Implications for risk assessment and modeling.

Introduction: Absorbed dose assessment from dermal exposure involves multiplying skin contamination by the dermal absorption coefficient, which is usually defined for the standard workday of 8 h. This strategy may suffer from limitations when the duration of exposure is extremely variable, such as in agricultural exposure to pesticides.

Objectives: The aim of this study was to estimate the dose of mancozeb absorbed by agricultural pesticide applicators in a typical working day considering the real duration of exposure, to compare these estimates with those coming from the use of the Fixed Fractional Approach, and to assess the suitability of the dose estimates in the interpretation of biological monitoring results.

A new, sensitive and versatile assay for quantitative determination of α-fluoro-β-alanine (AFBA) in human urine by using the reversed-phase ultrahigh performance-tandem mass spectrometry (rp-UHPLC-MS/MS) system.

A method for the quantitation of α-fluoro-β-alanine (AFBA), the main metabolite of capecitabine (Cape) and 5-fluoruracil (5-FU), is described. Among antineoplastic drugs (ADs), 5-FU and Cape (the new oral prodrug) are the most commonly applied drugs in cancer therapy. The main objective of this study was to develop a reliable method that would be easy to run on a reversed-phase UHPLC system coupled to tandem mass spectrometry.

Monitoring Surface Contamination by Antineoplastic Drugs in Italian Hospitals: Performance-Based Hygienic Guidance Values (HGVs) Project.

Antineoplastic drugs (ADs) will continue to represent a potential risk for personnel involved in the handling of these compounds and great concerns have been raised by the presence of ADs in many surveyed workplaces. Eight hospitals were investigated by means of wipe sampling for surface residue determination. Each wipe sample was tested for five ADs considered suitable exposure markers.

Environmental and biological monitoring for the identification of main exposure determinants in vineyard mancozeb applicators.

Grapevine is a vulnerable crop to several fungal diseases often requiring the use of ethylenebisdithiocarbamate (EBDC) fungicides, such as mancozeb. This fungicide has been reported to have goitrogenic, endocrine disrupting, and possibly immunotoxic effects. The aim of this study was to assess workers' exposure in two scenarios of mancozeb application and analyse the main determinants of exposure in order to better understand their mechanism of influence.

Determination of Glucocorticoids in UPLC-MS in Environmental Samples from an Occupational Setting.

Occupational exposures to glucocorticoids are still a neglected issue in some work environments, including pharmaceutical plants. We developed an analytical method to quantify simultaneously 21 glucocorticoids using UPLC coupled with mass spectrometry to provide a basis to carry out environmental monitoring. Samples were taken from air, hand-washing tests, pad-tests and wipe-tests.

[Risk assessment for food preparation, cooking and service].

The restaurant and food preparation, cooking and distribution sector includes hotels, restaurants, catering, fast food, ecc. The restaurant and food preparation, cooking and distribution sector form a significant part of the Italian economy; they provide employment for a large number of people, both direct employees as well as part-time and contract staff. In this sector there are many hazards that can lead to a broad range of injuries and/or diseases to the workers.

Exposure to perfluorinated compounds: in vitro study on thyroid cells.

Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) are widely used perfluorinated chemicals (PFCs). Previous studies detected PFOA and PFOS in human tissues including the thyroid gland. There are no studies on the in vitro effects of PFOA and PFOS on thyroid cells.

Validation of a radial diffusive sampler for measuring occupational exposure to 1,3-butadiene.

1,3-Butadiene (BD) is a major industrial chemical used in the manufacture of rubbers and latexes; it is also a ubiquitous environmental pollutant whose major source is traffic. Occupational exposure to (BD) can occur both during its production and during its use as a raw material. The objective of the study was the laboratory and field validation of a new diffusive sampler for BD.

[Evolution of technology and occupational exposures in petrochemical industry and in petroleum refining].

The industry of oil refining and petrochemical play an important role in terms of number of employees in the Italian production. Often the terms "petroleum refining" and "petrochemical" are used interchangeably to define processes that occur in complex plants, which grow outdoors on large surfaces and a visual impact is not irrelevant. In reality, the two areas involve potential exposure to different chemical agents, related to raw materials processed and the specific products.

Characterization of inhalable, thoracic, and respirable fractions and ultrafine particle exposure during grinding, brazing, and welding activities in a mechanical engineering factory.

Objective: To investigate the emission sources of fine and ultrafine particles (UFPs) during brazing, welding, and grinding in a mechanical engineering factory and to characterize UFP exposure by measuring size distributions, number, and surface area concentrations.

Methods: Samplings lasted 4 hours and were conducted during 5 days using the Grimm 1.109 portable aerosol spectrometer, the Grimm portable NanoCheck™ 1.

[Exposure to leather dusts and organic solvents--results of the PPTP-shoe study].

In the shoe industry leather dusts and organic solvents present in glues can be identified as a significant chemical risks. To assess the level of occupational exposure a sector study was conducted on small to medium size companies: in 9 were measured the respirable and inhalable dust concentrations and in 13 the solvents. The measurements were performed using personal samplers.

[Risk assessment of chemical agents].

The risk assessment of chemical agents is a well known and applied process carried out by Industrial Hygienists and Occupational Physicians based on exposure evaluation. The application of REACH (CE 1907/2006), CLP (CE 1272/2008) and SDS (UE 453/2010) introduces some changes and instruments to carry out the occupational exposure assessment, like new classification of substances, Exposure Scenario, suggested control measures that the Industrial Hygienist and the Occupational Physician must evaluate. If there is not a similar Exposure Scenario to apply a new risk assessment must carried out also by recommended software (ECETOC Targeted Risk Assessment; Easy to use workplace EMKG; Stoffenmanager).

Modelling infrared radiation exposure by black body-like sources.

In this work, a method previously proposed in the literature (Sisto R, Pinto I, Stacchini N et al. Infrared radiation exposure in traditional glass factories. AIHAJ 2000; 61: 5-10) to evaluate the exposure to infrared (IR) radiation when the source can be approximated as a black body is implemented in a mathematical code developed in Matlab.

Prenatal exposure to PFOS or PFOA alters motor function in mice in a sex-related manner.

Perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) are organic surfactants widely used in various industrial and consumer applications. Due to their chemical properties, these perfluorinated compounds (PFCs) have also become persistent contaminants. The risk of possible intrauterine and lactational exposure to these chemicals poses a significant health concern for potential developmental effects.

Perfluorooctane sulfonate and perfluorooctanoic acid in surgical thyroid specimens of patients with thyroid diseases.

Background: Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) are ubiquitous compounds that may act as endocrine disruptors, neurotoxic agents, and fetal development perturbing substances and may also be carcinogenic, as recently demonstrated in experimental animal models. There is little information on the potential for these compounds to affect the thyroid. Therefore, this study was performed to measure the intrathyroidal levels of PFOA and PFOS in surgical specimens of thyroid glands and to determine if there was a relationship between the concentrations of these substances and the clinical, biochemical, and histologic phenotype of the patients from whom the thyroids were obtained.