Novel Quaternary Ammonium Derivatives Based on Apple Pectin.

New quaternary ammonium derivatives (quats) based on apple pectin (PA) were synthesized by the chemical modification of native polysaccharides with various quaternization mixtures containing epichlorohydrin (ECH) and a tertiary amine. Pectin derivatives (QPAs) were studied by elemental analysis, conductometric titration, Fourier-transform infrared spectroscopy (FTIR), and C nuclear magnetic resonance (C NMR). Viscosity measurements enabled the evaluation of the viscosity average molar mass (M) for the unmodified polysaccharide, as well as its intrinsic viscosity ([η]) value.

Thermal Properties of Seed Cake Biomasses and Their Valorisation by Torrefaction.

Seed cakes, by-products from the cold press extraction of vegetable oils, are valuable animal feed supplements due to their high content of proteins, carbohydrates, and minerals. However, the presence of anti-nutrients, as well as the rancidification and development of aflatoxins, can impede their intended use, requiring alternative treatment and valorisation methods. Thermal treatment as a procedure for the conversion of seed cakes from walnuts, hemp, pumpkin, flax, and sunflower into valuable products or energy has been investigated in this paper.

In-Depth Characterization of Two Bioactive Coatings Obtained Using MAPLE on TiTaZrAg.

TiZrTaAg alloy is a remarkable material with exceptional properties, making it a unique choice among various industrial applications. In the present study, two types of bioactive coatings using MAPLE were obtained on a TiZrTaAg substrate. The base coating consisted in a mixture of chitosan and bioglass in which zinc oxide and graphene oxide were added.

Carbon nanotubes conjugated with cisplatin activate different apoptosis signaling pathways in 2D and 3D-spheroid triple-negative breast cancer cell cultures: a comparative study.

The type of experimental model for the in vitro testing of drug formulations efficiency represents an important tool in cancer biology, with great attention being granted to three-dimensional (3D) cultures as these offer a closer approximation of the clinical sensitivity of drugs. In this study, the effects induced by carboxyl-functionalized single-walled carbon nanotubes complexed with cisplatin (SWCNT-COOH-CDDP) and free components (SWCNT-COOH and CDDP) were compared between conventional 2D- and 3D-spheroid cultures of human breast cancer cells. The 2D and 3D breast cancer cultures were exposed to various doses of SWCNT-COOH (0.

Tri-Component Hydrogel as Template for Nanocrystalline Hydroxyapatite Deposition Using Alternate Soaking Method for Bone Tissue Engineering Applications.

Composite hydrogels containing apatite-like particles can act as scaffolds for osteoblast proliferation, with applications in bone tissue engineering. In this respect, porous biocompatible hydrogels were obtained from chitosan, oxidized pullulan, and PVA in different ratios. The stability of the hydrogels was ensured both by covalent bonds between aldehyde groups of oxidized pullulan and free amino groups of chitosan, and by physical bonds formed during freeze-thaw cycles and lyophilization.

Evidence through Thermal Analysis of Retro Diels-Alder Reaction in Model Networks Based on Anthracene Modified Polyester Resins.

The present work is focused on polyester resins obtained from the diglycidyl ether of bisphenol A and anthracene modified 5-maleimidoisophthalic acid. Because the maleimide-anthracene Diels-Alder (DA) adduct is stable at high temperatures, it is considered a good option for high performance polymers. However, the information related to the retroDA reaction for this type of adduct is sometimes incoherent.

Thermal and Viscoelastic Responses of Selected Lignocellulosic Wastes: Similarities and Differences.

Woody lignocellulosic biomasses comprise the non-edible parts of fruit trees. In recent years, the exploitation of this biomass has been widening in order to mitigate environmental issues. At the same time, this waste could be transformed into a value-added product (active carbon by pyrolysis, isolation of nanocellulose, oils or proteins).

Evaluation of the Sublimation Process of Some Purine Derivatives: Sublimation Rate, Activation Energy, Mass Transfer Coefficients and Phenomenological Models.

Caffeine and theophylline are compounds with important applications in the pharmaceutical industry and other fields of the chemical industry. These purine derivatives have simple chemical structures, therefore, the evaluation of their sublimation process contributes to the development of mass transfer analysis methods that can later be applied to other compounds with more complex structures. With the help of thermogravimetric analysis in isothermal conditions, the kinetic study of the sublimation of caffeine and theophylline, along with the evaluation of kinetic parameters (activation energy and the pre-exponential factor), was carried out.

Interaction of Mg Alloy with PLA Electrospun Nanofibers Coating in Understanding Changes of Corrosion, Wettability, and pH.

A modified biodegradable magnesium alloy (AZ31, 96 wt% Mg, 3 wt% Al, and 1 wt% Zn) with polylactic acid (PLA) nanofibers was obtained by the electrospinning technique. The presence of PLA nanofibers was evidenced using Fourier transform infrared spectroscopy (FT-IR) and using an scanning electronic microscope (SEM) equipped with an energy dispersive X-ray spectroscopy (EDX) module. The degradation behavior of an uncoated Mg alloy and a Mg alloy coated with PLA was evaluated through hydrogen evolution, pH, and electrochemical measurements in simulated body fluid.

Carboxyl-Functionalized Carbon Nanotubes Loaded with Cisplatin Promote the Inhibition of PI3K/Akt Pathway and Suppress the Migration of Breast Cancer Cells.

PI3K/Akt signaling is one of the most frequently dysregulated pathways in cancer, including triple-negative breast cancer. With considerable roles in tumor growth and proliferation, this pathway is studied as one of the main targets in controlling the therapies' efficiency. Nowadays, the development of nanoparticle-drug conjugates attracts a great deal of attention due to the advantages they provide in cancer treatment.

Binary Silicone Elastomeric Systems with Stepwise Crosslinking as a Tool for Tuning Electromechanical Behavior.

Interpenetrating polymer networks (IPNs) represent an interesting approach for tuning the properties of silicone elastomers due to the possible synergism that may occur between the networks. A new approach is presented, which consists of mixing two silicone-based networks with different crosslinking pathways; the first network being cured by condensation route and the second network by UV curing. The networks were mixed in different ratios and the resulted samples yield good mechanical properties (improved elongations, up to 720%, and Young's modulus, 1 MPa), thermal properties (one glass transition temperature, ~-123 °C), good dielectric strength (~50 V/μm), and toughness (63 kJ/m).

Modulation of the PLLA Morphology through Racemic Nucleation to Reach Functional Properties Required by 3D Printed Durable Applications.

This paper presents an alternative for enhancing the durability of poly (L-lactide) (PLLA) by racemic nucleation following stereo-complexation with a selected poly (D-lactide) (PLDA). The compounds are obtained by melt blending of a PLLA grade, previously designed for 3D printing but with a low heat deflection temperature and impact resistance, with grades of PLDA differing in their molecular weight (Mw), D-lactide content (DS) and concentration. Our method considered how to reveal the racemic nucleation caused by stereo-complexation and its influence on functional properties.

Dynamic Mechanical Analysis Investigations of PLA-Based Renewable Materials: How Are They Useful?

Interest in renewable polymers increased exponentially in the last decade and in this context poly(lactic acid) (PLA) became the leader mainly for practical reasons. Nevertheless, it is outstanding also from a scientific point of view, because its thermal and morphological properties are offering challenging new insights. With regard to dynamic mechanical analysis (DMA), PLA does not have the classical behavior of a thermoplastic polymer.

Nanotubes and nano pores with chitosan construct on TiZr serving as drug reservoir.

Taking into account that modified and non modified TiZr alloys have a chance as alternatives for Ti as implant materials, this paper is focused on the elaboration and characterization of TiZr hybrid nanostructures (nanopores and nanotubes) loaded with gentamicin (GS) and covered with chitosan. FT-IR analysis permitted structure and corresponding bands identification. Scanning electronic microscopy (SEM) was used for morphology analysis and nanostrucure dimensions evaluations.

Influence of Matrigel on Single- and Multiple-Spheroid Cultures in Breast Cancer Research.

This study aimed to develop and compare single and multiple 3D models such as multicellular tumor spheroids and to investigate the influence of Matrigel on their morphological and functional behavior. MDA-MB-231 3D models were generated in the presence and absence of Matrigel and their key biological properties within 6 days of culture were monitored. Our results revealed the formation of well-defined 3D models in the presence of Matrigel, with a uniform morphology, increased diameter, good circularity, and increased expression of a proliferation marker (PCNA).

Cisplatin Loaded Multiwalled Carbon Nanotubes Induce Resistance in Triple Negative Breast Cancer Cells.

In this paper we developed a method for multiwalled carbon nanotubes (MWCNTs) use as carriers for a drug based on platinum in breast cancer therapy. The method of functionalization involves the carboxyl functionalization of nanotubes and encapsulation of cisplatin (CDDP) into MWCNTs. The biological properties of MWCNTs loaded with CDDP (MWCNT-COOH-CDDP) and of individual components MWCNT-COOH and free CDDP were evaluated on MDA-MB-231 cells.

Zwitterionic Cysteine Drug Coating Influence in Functionalization of Implantable Ti50Zr Alloy for Antibacterial, Biocompatibility and Stability Properties.

The present paper aims atincreasing the bioperformance of implantable Ti50Zr alloy using zwitterionic cysteine drug coating. Aspects such as stability, biocompatibility, and antibacterial effects were investigated with the help of various methods such as infrared spectroscopy (FT-IR), scanning electronic microscopy (SEM), electrochemical methods, contact angle determinations and cell response. The experimental data of zwitterionic cysteine coating indicate the existence of a hydration layer due to hydrophilic groups evidenced in FT-IR which is responsible for the decrease of contact angle and antibacterial capabilities.

Alkaline Phosphatase Immobilization on New Chitosan Membranes with Mg for Biomedical Applications.

In this paper, we present the fabrication and characterization of new chitosan-based membranes while using a new biotechnology for immobilizing alkaline phosphatase (ALP). This technology involved metal ions incorporation to develop new biopolymeric supports. The chemical structure and morphological characteristics of proposed membranes were evaluated by infrared spectroscopy (FT-IR) and the scanning electron microscopy technique (SEM).

Periodontal materials and cell biology for guided tissue and bone regeneration.

The present review is intended to find links between periodontal materials of the dentomaxillary apparatus and cell biology at the beginning of a century fraught with various forms of periodontal diseases and needing new treatment strategies. The manuscript has two different parts. The first describes the anatomy of tooth supporting structures, as well as related pathologies.

Activity of vancomycin release from bioinspired coatings of hydroxyapatite or TiO nanotubes.

Herein we investigate the efficiency of various biomimetic coatings for localized drug delivery, using vancomycin as key therapeutic drug, which is a widely used antibiotic for the treatment of strong infections caused by positive Gram bacteria. We evaluate classical hydroxyapatite and biomimetic hydroxyapatite-collagen coatings obtained by electrochemical deposition as well as TiO nanotubes arrays obtained by electrochemical anodization. Surface morphology, compositional and structural data confirm the incorporation of vancomycin into the layers and drug release profiles for vancomycin evaluate their release ability.

Antimicrobial activity of the surface coatings on TiAlZr implant biomaterial.

This study is devoted to antimicrobial activity of new surface coatings on TiAlZr. Ti alloys such as TiAlZr are used as implant biomaterials, but, despite the good behavior of such alloys in simulated conditions, bacterial infections appear after the introduction of an implant into the body. The infections are typically caused by the adherence and colonization of bacteria on the surfaces of the implants.