Implications of Pyrolytic Gas Dynamic Evolution on Dissolved Black Carbon Formed During Production of Biochar from Nitrogen-Rich Feedstock.

Gases and dissolved black carbon (DBC) formed during pyrolysis of nitrogen-rich feedstock would affect atmospheric and aquatic environments. Yet, the mechanisms driving biomass gas evolution and DBC formation are poorly understood. Using thermogravimetric-Fourier transform infrared spectrometry and two-dimensional correlation spectroscopy, we correlated the temperature-dependent primary noncondensable gas release sequence (HO → CO → HCN, NH → CH → CO) with specific defunctionalization stages in the order: dehydration, decarboxylation, denitrogenation, demethylation, and decarbonylation.

Waste Nitrogen Upcycling to Amino Acids during Anaerobic Fermentation on Biochar: An Active Strategy for Regulating Metabolic Reducing Power.

This study proposes a novel strategy that utilizes biochar (BC) during anaerobic fermentation (AF) to generate amino acids (AAs) toward nitrogen upcycling. The BC, pyrolyzed at 800 °C (BC800) to enhance graphite structures and electron-accepting sites, effectively addresses issues related to biosynthetic reducing power nicotinamide adenine dinucleotide phosphate insufficiency by altering cellular conditions and alleviates feedback inhibition through the immobilization of end products. This process establishes unique microbial signaling and energy networks, with becoming dominant in the biofilm.

Revealing OH species in situ generated on low-valence Cu sites for selective carbonyl oxidation.

Catalytic oxidation through the transfer of lattice oxygen from metal oxides to reactants, namely the Mars-van Krevelen mechanism, has been widely reported. In this study, we evidence the overlooked oxidation route that features the in situ formation of surface OH species on Cu catalysts and its selective addition to the reactant carbonyl group. We observed that glucose oxidation to gluconic acid in air (21% O) was favored on low-valence Cu sites according to X-ray spectroscopic analyses.

Facilitating Intracellular Electron Bifurcation by Mediating Flavin-Based Extracellular and Transmembrane Electron Transfer: A Novel Role of Pyrogenic Carbon in Dark Fermentation for Hydrogen Production.

Pyrogenic carbon is considered an enhancer to H-yielding dark fermentation (DF), but little is known about how it regulates extracellular electron transfer (EET) and influences transmembrane respiratory chains and intracellular metabolisms. This study addressed these knowledge gaps and demonstrated that wood waste pyrogenic carbon (biochar) could significantly improve the DF performance; e.g.

Enhanced Arsenate Immobilization by Kaolinite via Heterogeneous Pathways during Ferrous Iron Oxidation.

Clay minerals are ubiquitous in subsurface environments and have long been recognized as having a limited or negligible impact on the fate of arsenic (As) due to their negatively charged surfaces. Here, we demonstrate the significant role of kaolinite (Kln), a pervasive clay mineral, in enhancing As(V) immobilization during ferrous iron (Fe(II)) oxidation at near-neutral pH. Our results showed that Fe(II) oxidation alone was not capable of immobilizing As(V) at relatively low Fe/As molar ratios (≤2) due to the generation of Fe(III)-As(V) nanocolloids that could still migrate easily as truly dissolved As did.

The Impact of Telemedicine on Human Immunodeficiency Virus (HIV)-Related Clinical Outcomes During the COVID-19 Pandemic.

The coronavirus disease of 2019 (COVID-19) pandemic exacerbated barriers to care for people living with human immunodeficiency virus (HIV) (PLWH). The quick uptake of telemedicine in the outpatient setting provided promise for care continuity. In this study, we compared appointment and laboratory no-show rates in an urban outpatient HIV clinic during three time periods: (1) Pre-COVID-19: 9/15/2019-3/14/2020 (predominately in-person), (2) "Early" COVID-19: 3/15/2020-9/14/2020 (predominately telemedicine), and (3) "Later" COVID-19: 9/15/2020-3/14/2021 (mixed in-person/telemedicine).

Leaching characteristics of nutrients in food waste digestate-derived biochar.

Food waste anaerobic digestion requires proper utilization of solid digestate, and pyrolysis emerges as an effective method to produce nutrient-rich biochar. This study investigated the leaching characteristics and speciation changes of nutrients in food waste digestate (FWD)-derived biochar pyrolyzed at 350 °C (BC350), 450 °C (BC450), and 550 °C (BC550). BC350 featured inorganic nitrogen, while BC450 and BC550 contained elevated organic nitrogen.

Nano zerovalent Fe did not reduce metal(loid) leaching and ecotoxicity further than conventional Fe grit in contrasting smelter impacted soils: A 1-year field study.

The majority of the studies on nanoscale zero-valent iron (nZVI) are conducted at a laboratory-scale, while field-scale evidence is scarce. The objective of this study was to compare the metal(loid) immobilization efficiency of selected Fe-based materials under field conditions for a period of one year. Two contrasting metal(loid) (As, Cd, Pb, Zn) enriched soils from a smelter-contaminated area were amended with sulfidized nZVI (S-nZVI) solely or combined with thermally stabilized sewage sludge and compared to amendment with microscale iron grit.

Machine learning application for predicting key properties of activated carbon produced from lignocellulosic biomass waste with chemical activation.

The successful application of gradient boosting regression (GBR) in machine learning to forecast surface area, pore volume, and yield in biomass-derived activated carbon (AC) production underscores its potential for enhancing manufacturing processes. The GBR model, collecting 17 independent variables for two-step activation (2-SA) and 14 for one-step activation (1-SA), demonstrates effectiveness across three datasets-1-SA, 2-SA, and a combined dataset. Notably, in 1-SA, the GBR model yields R values of 0.

Mineral-mediated stability of organic carbon in soil and relevant interaction mechanisms.

Soil, the largest terrestrial carbon reservoir, is central to climate change and relevant feedback to environmental health. Minerals are the essential components that contribute to over 60% of soil carbon storage. However, how the interactions between minerals and organic carbon shape the carbon transformation and stability remains poorly understood.

Machine learning for municipal sludge recycling by thermochemical conversion towards sustainability.

The sustainable disposal of high-moisture municipal sludge (MS) has received increasing attention. Thermochemical conversion technologies can be used to recycle MS into liquid/gas bio-fuel and value-added solid products. In this review, we compared energy recovery potential of common thermochemical technologies (i.

A holistic framework of biochar-augmented cementitious products and general applications: Technical, environmental, and economic evaluation.

In the context of the circular economy, the development of innovative and low-carbon concrete that incorporates different kinds of waste materials is gaining attention among the research community, regulatory agencies, and policymakers. These materials can be incorporated into concrete mixtures as aggregates or as fillers for improvement of product properties. This study aims to identify reliable designs for biochar-augmented cementitious products and general applications through technical, environmental, and economic assessments.

Improved energy recovery from yard waste by water-starved hydrothermal treatment: Effects of process water and pressure.

This study investigated the feasibility of a high-loading process with less water consumption for the valorization of wet biomass waste through hydrothermal carbonization (HTC) with and without N pressurization from the views of water saving, carbon utilization, and energy recovery. The results revealed that reducing the liquid-to-solid ratio from 10 to 2.5 significantly improved carbon storage in hydrochar due to preferential carbon sequestration as the solid phase (59.

Negative-carbon recycling of copper from waste as secondary resources using deep eutectic solvents.

Copper plays a crucial role in the low-carbon transformation of global communities with prevalent use of electric vehicles. This study proposed an environmentally friendly approach that utilizes a deep eutectic solvent (DES), choline chloride-ethylene glycol (ChCl-EG), as green solvent for the selective extraction of copper from scrap materials. With hydrogen peroxide as an oxidizing agent, the copper species from the printed circuit boards (PCBs) scraps were efficiently leached by the DES through oxidation-complexation reactions (conditions: 25 min, 20 °C, and 5 wt% HO).

Enhanced adsorption of aromatic VOCs on hydrophobic porous biochar produced via microwave rapid pyrolysis.

To customize biochar suitable for efficient adsorption of benzene derivatives, this study presents programmed microwave pyrolysis to produce hydrophobic porous biochar with low-dose ferric chloride. Designated control of the ramping rates in the carbonization stage and the temperatures in the activation stage were conducive to enlarging the specific surface area. Iron species, including amorphous iron minerals, could create small-scale hotspots during microwave pyrolysis to promote microporous structure development.

Mechanochemical synthesis of calcium-biochar for decontamination of arsenic-containing acid mine drainage.

Ca-biochar is an efficient material for As(III)-containing acid mine drainage (AMD) decontamination, while it is challenging to fabricate Ca-biochar with oyster shell waste as the Ca source due to its complex structure. Herein, a mechanochemical method was proposed to activate oyster shell waste and wood waste for Ca-biochar design and production, and its efficacy and relevant mechanisms for AMD detoxification were evaluated. The smaller size Ca-biochar produced by the medium-speed ball milling showed a higher As(III) removal (74.

Valorization of slow pyrolysis vapor from biomass waste: Comparative study on pyrolysis characteristics, evolved gas evaluation, and adsorption effects.

Pyrolysis vapor is an important byproduct in the production of biochar from biomass waste, and its emission may pose potential environmental risks. To achieve green production of biochar and efficient utilization of pyrolysis vapors, a novel strategy is proposed in this study to use pristine biochar as an adsorbent to adsorb the pyrolysis vapors. According to thermogravimetry-Fourier infrared spectroscopy-mass spectrometry evaluation, the evolved vapors mainly consisted of oxygenated compounds, hydrocarbons, CO, CO, and HO.

Revealing roles of CO and N in pressurized hydrothermal carbonization process for enhancing energy recovery and carbon sequestration.

In this study, CO- and N-pressurized hydrothermal carbonization processes were investigated to understand the catalytic effects of CO on hydrochar production and its quality (e.g., surface properties, energy recovery, and combustion behaviour).

High-efficiency removal of arsenic(III) from wastewater using combined copper ferrite@biochar and persulfate.

Arsenic (As) is a potentially toxic element with variable valence states. Due to high toxicity and bioaccumulation, As can pose a severe threat to the quality of the ecology as well as human health. In this work, As(III) in water was effectively removed by biochar-supported copper ferrite magnetic composite with persulfate.

Recent advancements and challenges in emerging applications of biochar-based catalysts.

The sustainable utilization of biochar produced from biomass waste could substantially promote the development of carbon neutrality and a circular economy. Due to their cost-effectiveness, multiple functionalities, tailorable porous structure, and thermal stability, biochar-based catalysts play a vital role in sustainable biorefineries and environmental protection, contributing to a positive, planet-level impact. This review provides an overview of emerging synthesis routes for multifunctional biochar-based catalysts.