Bioinspired Hydrophobicity via Temperature-Induced Phase Separation of Beeswax: A Pathway for Developing Cellulose Nanofiber-Based Adsorbents for the Removal of Conventional Tetracycline Tablets.

Cellulose nanofiber-based aerogels (CNFAs) hold immense promise across diverse fields, but their innate hydrophilicity and structural fragility in water have constrained their utility in water purification. This study introduces a green approach to induce hydrophobicity into CNFAs via thermally induced phase separation (TIPS) of beeswax, which was adhered to the nanofiber by hydrogen bonding and hydrophobic-hydrophobic interactions. The fabricated aerogel was characterized by using FTIR, SEM, XRD, TGA, contact angle, BET, and compression test.

Facile fabrication of arecanut palm sheath based robust hydrophobic cellulose nanopapers via self-assembly of ZnO nanoflakes and its shelf-life prediction for sustainable packaging applications.

Cellulose nanofibers have been extracted from arecanut palm sheath fibers via mild oxalic acid hydrolysis coupled with steam explosion technique. Cellulose nanofibers with diameter of 20.23 nm were obtained from arecanut palm sheath fibers.

Characterization of PS/PP/HDPE/LDPE Polymer Blend Obtained from Plastic Waste Collected on Beaches in Ilhéus-Bahia, Brazil.

A large volume of polymeric waste is generated in cities, and some of this reaches the sea and beaches. This waste stays for hundreds of years, damaging marine environments and organisms. To minimize the effects of pollution, collection and recycling allow a return to the production chain.

Novel 3D porous aerogels engineered at nano scale from cellulose nano fibers and curcumin: An effective treatment for chronic wounds.

Traditional cotton gauze derived from cellulose has many limitations in the processes of wound healing. To overcome these hassles, we used cellulose nanofibers (CNF) incorporated with curcumin for the fabrication of wound healing 3D porous aerogel. Cellulose nanofibers synthesized from plant waste are promising sustainable nanomaterials due to their biocompatibility and biodegradability.

Improved Hydrophobicity of Macroalgae Biopolymer Film Incorporated with Kenaf Derived CNF Using Silane Coupling Agent.

Hydrophilic behaviour of carrageenan macroalgae biopolymer, due to hydroxyl groups, has limited its applications, especially for packaging. In this study, macroalgae were reinforced with cellulose nanofibrils (CNFs) isolated from kenaf bast fibres. The macroalgae CNF film was after that treated with silane for hydrophobicity enhancement.

A Review on Plant Cellulose Nanofibre-Based Aerogels for Biomedical Applications.

Cellulose nanomaterials from plant fibre provide various potential applications (i.e., biomedical, automotive, packaging, etc.

Ultra-fast heat dissipating aerogels derived from polyaniline anchored cellulose nanofibers as sustainable microwave absorbers.

Electromagnetic (EM) pollution is ubiquitous and has soared to a great extent in the past few decades. The use of plant sourced cellulose nanofibers to fabricate sustainable and high performance electromagnetic shielding materials is foreseen as a green solution by the electronics industry to address this unseen pollutant. In this view, we report a facile and environmentally benign strategy to synthesize ultra-light and highly conductive aerogels derived from cellulose nanofibers (CNF) decorated with polyaniline (PANI) via a simple in-situ polymerization and subsequent freeze drying process devoid of any volatile organic solvents.

Ethanol Production and Other Bioproducts by Galactomyces geotrichum from Sugarcane Bagasse Hydrolysate.

This study investigated the enzymatic saccharification of alkaline-pretreated sugarcane bagasse (PSB) and the bioconversion of simple sugars from hydrolysates to ethanol and other bioproducts by the yeast Galactomyces geotrichum. The effects of percentage of dry substrate (3 and 10% w/v) and time of hydrolysis (24 and 72 h) in the content of released sugars were evaluated. The concentrations of monosaccharides and total reducing sugars (TRS) were calculated by high-performance liquid chromatography (HPLC) and by 3.

Robust Superhydrophobic Cellulose Nanofiber Aerogel for Multifunctional Environmental Applications.

The fabrication of superadsorbent for dye adsorption is a hot research area at present. However, the development of low-cost and highly efficient superadsorbents against toxic textile dyes is still a big challenge. Here, we fabricated hydrophobic cellulose nanofiber aerogels from cellulose nanofibers through an eco-friendly silanization reaction in liquid phase, which is an extremely efficient, rapid, cheap, and environmentally friendly procedure.

Use of an (Hemi) Cellulolytic Enzymatic Extract Produced by Aspergilli Species Consortium in the Saccharification of Biomass Sorghum.

This study evaluated the production of lignocellulose-degrading enzymes by solid-state fermentation (SSF) using a microbial consortium of Aspergillus fumigatus SCBM6 and A. niger SCBM1 (AFN extract). The fungal strains were cultivated in sugarcane bagasse (SCB) and wheat bran (WB) as lignocellulosic substrates for 7 days at 30 °C.

Polymeric blends of hydrocolloid from chia seeds/apple pectin with potential antioxidant for food packaging applications.

The aim of this study was to investigate the antioxidant, mechanical and physical properties of a new film-based polymeric blend of hydrocolloids obtained from the aqueous extraction of chia seeds (source antioxidants) and apple pectin. The individual matrices films were brittle and rigid with poor mechanical properties. The blends formulations contributed to improved mechanical properties regarding workability and resistance.

Cellulose Nanofiber-Based Polyaniline Flexible Papers as Sustainable Microwave Absorbers in the X-Band.

A series of flexible, lightweight, and highly conductive cellulose nanopapers were fabricated through in situ polymerization of aniline monomer on to cellulose nanofibers with a rationale for attenuating electromagnetic radiations within 8.2-12.4 GHz (X band).

Mechanical properties of natural rubber nanocomposites reinforced with high aspect ratio cellulose nanocrystals isolated from soy hulls.

Cellulose nanocrystals (CNCs) were isolated from soy hulls by acid sulfuric hydrolysis. The resulting CNCs were characterized using TEM, AFM, WAXS, elemental analysis and TGA. The CNCs have a high crystallinity, specific surface area and aspect ratio.

Valorization of an agro-industrial waste, mango seed, by the extraction and characterization of its cellulose nanocrystals.

Mango seeds are lignocellulosic agro-industrial residues available in large quantities in tropical countries and are simply discarded or used as animal feed. They are a natural and renewable resource, and were used to generate new polymeric materials in this work. This new materials can be used as alternatives to fossil resources such as petroleum.

Physical vapor deposited thin films of lignins extracted from sugar cane bagasse: morphology, electrical properties, and sensing applications.

The concern related to the environmental degradation and to the exhaustion of natural resources has induced the research on biodegradable materials obtained from renewable sources, which involves fundamental properties and general application. In this context, we have fabricated thin films of lignins, which were extracted from sugar cane bagasse via modified organosolv process using ethanol as organic solvent. The films were made using the vacuum thermal evaporation technique (PVD, physical vapor deposition) grown up to 120 nm.

Surface esterification of cellulose fibers: characterization by DRIFT and contact angle measurements.

The surface chemical modification of microcrystalline cellulose and cellulose fibers obtained from different sugar cane bagasse pulping processes, viz. Kraft, organosolv ethanol/water and organosolv/supercritical carbon dioxide, were studied in heterogeneous conditions using modest amounts of octadecanoyl and dodecanoyl chloride. The ensuing surfaces acquired a non-polar character, suitable for incorporating these fibers as reinforcing agents in composite materials based on polymeric matrices.