[Isokinetic strength testing with different biomechanical demands on core strength: a comparison of military competitive athletes and soldiers with high occupational physical strain].

It is known that anthropometric data (weight, height, BMI, waist circumference and WHtR) and male gender are positively correlated with greater core strength, while age is negatively correlated. For competitive athletes with no significant differences in the anthropometric data stated above, there have hardly been any studies in which isometric core strength in a seated position is quantitatively compared among athletes in different sports. This study aimed to analyse different sports in well-trained athletes using military competitive sports as an example with regard to possible differences in core strength.

Origami single-end capacitive sensing for continuous shape estimation of morphing structures.

In this work, we propose a novel single-end morphing capacitive sensing method for shape tracking, FxC, by combining Folding origami structures and Capacitive sensing to detect the morphing structural motions using state-of-the-art sensing circuits and deep learning. It was observed through embedding areas of origami structures with conductive materials as single-end capacitive sensing patches, that the sensor signals change coherently with the motion of the structure. Different from other origami capacitors where the origami structures are used in adjusting the thickness of the dielectric layer of double-plate capacitors, FxC uses only a single conductive plate per channel, and the origami structure directly changes the geometry of the conductive plate.

Embedding textile capacitive sensing into smart wearables as a versatile solution for human motion capturing.

This work presents a novel and versatile approach to employ textile capacitive sensing as an effective solution for capturing human body movement through fashionable and everyday-life garments. Conductive textile patches are utilized for sensing the movement, working without the need for strain or direct body contact, wherefore the patches can sense only from their deformation within the garment. This principle allows the sensing area to be decoupled from the wearer's body for improved wearing comfort and more pleasant integration.

Exploring Simple Particle-Based Signal Amplification Strategies in a Heterogeneous Sandwich Immunoassay with Optical Detection.

Heterogeneous sandwich immunoassays are widely used for biomarker detection in bioanalysis and medical diagnostics. The high analyte sensitivity of the current "gold standard" enzyme-linked immunosorbent assay (ELISA) originates from the signal-generating enzymatic amplification step, yielding a high number of optically detectable reporter molecules. For future point-of-care testing (POCT) and point-of-need applications, there is an increasing interest in more simple detection strategies that circumvent time-consuming and temperature-dependent enzymatic reactions.

Influence of nanoparticle encapsulation and encoding on the surface chemistry of polymer carrier beads.

Surface-functionalized polymer beads encoded with molecular luminophores and nanocrystalline emitters such as semiconductor nanocrystals, often referred to as quantum dots (QDs), or magnetic nanoparticles are broadly used in the life sciences as reporters and carrier beads. Many of these applications require a profound knowledge of the chemical nature and total number of their surface functional groups (FGs), that control bead charge, colloidal stability, hydrophobicity, and the interaction with the environment and biological systems. For bioanalytical applications, also the number of groups accessible for the subsequent functionalization with, e.

Synthesis and characterization of lipopolysaccharide (LPS) anchored polystyrene microparticles as a synthetic model system for attachment studies.

Outer membrane lipopolysaccharides (LPS) play a crucial role in determining attachment behavior and pathogenicity of bacteria. The aim of this study was to develop a simple procedure for anchoring bacterial lipopolysaccharides to polystyrene (PS) microparticles as a model system for in situ attachment studies. By using a swell-capture methodology, commercially available LPS of Pseudomonas aeruginosa (strain ATCC 27316 serotype 10.

The Relationship between Ergometric Treadmill or Bicycle Performance and Isokinetic Trunk Strength - A Retrospective Analysis.

The relationship between trunk strength and athletic performance is well known. In the past, trunk strength and athletic performance were measured in field tests. Previous studies encouraged sport-specific analyses.

Analyzing the surface of functional nanomaterials-how to quantify the total and derivatizable number of functional groups and ligands.

Functional nanomaterials (NM) of different size, shape, chemical composition, and surface chemistry are of increasing relevance for many key technologies of the twenty-first century. This includes polymer and silica or silica-coated nanoparticles (NP) with covalently bound surface groups, semiconductor quantum dots (QD), metal and metal oxide NP, and lanthanide-based NP with coordinatively or electrostatically bound ligands, as well as surface-coated nanostructures like micellar encapsulated NP. The surface chemistry can significantly affect the physicochemical properties of NM, their charge, their processability and performance, as well as their impact on human health and the environment.

Multimodal Cleavable Reporters for Quantifying Carboxy and Amino Groups on Organic and Inorganic Nanoparticles.

Organic and inorganic nanoparticles (NPs) are increasingly used as drug carriers, fluorescent sensors, and multimodal labels in the life and material sciences. These applications require knowledge of the chemical nature, total number of surface groups, and the number of groups accessible for subsequent coupling of e.g.

Multimodal Cleavable Reporters versus Conventional Labels for Optical Quantification of Accessible Amino and Carboxy Groups on Nano- and Microparticles.

Many applications of nanometer- and micrometer-sized particles include their surface functionalization with linkers, sensor molecules, and analyte recognition moieties like (bio)ligands. This requires knowledge of the chemical nature and number of surface groups accessible for subsequent coupling reactions. Particularly attractive for the quantification of these groups are spectrophotometric and fluorometric assays, which can be read out with simple instrumentation.

Recent developments in Förster resonance energy transfer (FRET) diagnostics using quantum dots.

The exceptional photophysical properties and the nanometric dimensions of colloidal semiconductor quantum dots (QD) have strongly attracted the bioanalytical community over the last approximately 20 y. In particular, the integration of QDs in the analysis of biological components and interactions, and the related diagnostics using Förster resonance energy transfer (FRET), have allowed researchers to significantly improve and diversify fluorescence-based biosensing. In this TRENDS article, we review some recent developments in QD-FRET biosensing that have implemented this technology in electronic consumer products, multiplexed analysis, and detection without light excitation for diagnostic applications.

Reference materials and representative test materials to develop nanoparticle characterization methods: the NanoChOp project case.

This paper describes the production and characteristics of the nanoparticle test materials prepared for common use in the collaborative research project NanoChOp (Chemical and optical characterization of nanomaterials in biological systems), in casu suspensions of silica nanoparticles and CdSe/CdS/ZnS quantum dots (QDs). This paper is the first to illustrate how to assess whether nanoparticle test materials meet the requirements of a "reference material" (ISO Guide 30, 2015) or rather those of the recently defined category of "representative test material (RTM)" (ISO/TS 16195, 2013). The NanoChOp test materials were investigated with small-angle X-ray scattering (SAXS), dynamic light scattering (DLS), and centrifugal liquid sedimentation (CLS) to establish whether they complied with the required monomodal particle size distribution.

A Rapid, Amplification-Free, and Sensitive Diagnostic Assay for Single-Step Multiplexed Fluorescence Detection of MicroRNA.

The importance of microRNA (miRNA) dysregulation for the development and progression of diseases and the discovery of stable miRNAs in peripheral blood have made these short-sequence nucleic acids next-generation biomarkers. Here we present a fully homogeneous multiplexed miRNA FRET assay that combines careful biophotonic design with various RNA hybridization and ligation steps. The single-step, single-temperature, and amplification-free assay provides a unique combination of performance parameters compared to state-of-the-art miRNA detection technologies.

Lanthanides and quantum dots as Förster resonance energy transfer agents for diagnostics and cellular imaging.

Luminescent lanthanide labels (LLLs) and semiconductor quantum dots (QDs) are two very special classes of (at least partially) inorganic fluorophores, which provide unique properties for Förster resonance energy transfer (FRET). FRET is an energy-transfer process between an excited donor fluorophore and a ground-state acceptor fluorophore in close proximity (approximately 1-20 nm), and therefore it is extremely well suited for biosensing applications in optical spectroscopy and microscopy. Within this cogent review, we will outline the main photophysical advantages of LLLs and QDs and their special properties for FRET.

Six-color time-resolved Förster resonance energy transfer for ultrasensitive multiplexed biosensing.

Simultaneous monitoring of multiple molecular interactions and multiplexed detection of several diagnostic biomarkers at very low concentrations have become important issues in advanced biological and chemical sensing. Here we present an optically multiplexed six-color Förster resonance energy transfer (FRET) biosensor for simultaneous monitoring of five different individual binding events. We combined simultaneous FRET from one Tb complex to five different organic dyes measured in a filter-based time-resolved detection format with a sophisticated spectral crosstalk correction, which results in very efficient background suppression.

Terbium to quantum dot FRET bioconjugates for clinical diagnostics: influence of human plasma on optical and assembly properties.

Förster resonance energy transfer (FRET) from luminescent terbium complexes (LTC) as donors to semiconductor quantum dots (QDs) as acceptors allows extraordinary large FRET efficiencies due to the long Förster distances afforded. Moreover, time-gated detection permits an efficient suppression of autofluorescent background leading to sub-picomolar detection limits even within multiplexed detection formats. These characteristics make FRET-systems with LTC and QDs excellent candidates for clinical diagnostics.

Semiconductor quantum dots as FRET acceptors for multiplexed diagnostics and molecular ruler application.

Applications based on Förster resonance energy transfer (FRET) play an important role for the determination of concentrations and distances within nanometer-scale systems in vitro and in vivo in many fields of biotechnology. Semiconductor nanocrystals (Quantum dots - QDs) possess ideal properties for their application as FRET acceptors when the donors have long excited state lifetimes and when direct excitation of QDs can be efficiently suppressed. Therefore, luminescent terbium complexes (LTCs) with excited state lifetimes of more than 2 ms are ideal FRET donor candidates for QD-acceptors.

Doxycycline-dependent photoactivated gene expression in eukaryotic systems.

High spatial and temporal resolution of conditional gene expression is typically difficult to achieve in whole tissues or organisms. We synthesized two reversibly inhibited, photoactivatable ('caged') doxycycline derivatives with different membrane permeabilities for precise spatial and temporal light-controlled activation of transgenes based on the 'Tet-on' system. After incubation with caged doxycycline or caged cyanodoxycycline, we induced gene expression by local irradiation with UV light or by two-photon uncaging in diverse biological systems, including mouse organotypic brain cultures, developing mouse embryos and Xenopus laevis tadpoles.

Mechanism of photocleavage of (coumarin-4-yl)methyl esters.

(Coumarin-4-yl)methyl esters (CM-A) are caged compounds that, upon excitation, release the masked biologically active acid HA and the highly fluorescent (coumarin-4-yl)methyl alcohol CM-OH very rapidly and in part with high efficiency. The results of photostationary and time-resolved investigations of 25 CM-A esters and corresponding CM-OH alcohols with varying substitution on the (coumarin-4-yl)methyl moiety and a wide variation in the structure of the acidic part have been analyzed. The initial step of the photoreaction is heterolytic ester cleavage leading to the singlet ion pair 1[CM+ A-] with rate constant k1.

Kinetics study of the photocleavage of (coumarin-4-yl)methyl esters.

Photolabile coumarinylmethyl esters of biomolecules (caged compounds) are new tools for studying spatial and time-dependent aspects of signal transduction in living cells. Herein we describe a fluoresence spectroscopic method for the determination of the rate constants of the photolysis steps of such caged compounds using (6.7-dimethoxycoumarin-4-yl)methyl diethyl phosphate (DMCM-DEP) and sodium (6,7-dimethoxycoumarin-4-yl)methyl sulfate (DMCM-S).