Post-traumatic osteoarthritis remains a significant clinical challenge, with limited effective treatment options. Conventional hydrogels for articular cartilage repair primarily focus on the bioactivity of the materials but often overlook the importance of monitoring the hydrogel's behavior in situ. This study presents the development of a novel injectable, traceable fluorescent hydrogel designed to prevent cartilage degradation and promote cartilage regeneration.
View Article and Find Full Text PDFOsteoarthritis (OA) remains a significant clinical challenge, with current treatments like sodium hyaluronate injections offering limited efficacy due to suboptimal lubrication and rapid degradation. In this study, we explored an advanced solution to these issues by investigating the colubrication mechanism of a composite biolubricant consisting of 2-methacryloyloxyethyl phosphorylcholine-modified chitosan (CS-MPC) and chondroitin sulfate-modified chitosan nanoparticles (CS-ChS NPs) using molecular dynamics (MD) simulations. Results show that the composite lubricant outperforms individual CS-MPC or CS-ChS NPs, exhibiting a lower coefficient of friction (COF) and a superior load-bearing capacity.
View Article and Find Full Text PDFThe high-dynamic, high-loading environment in the joint cavity puts urgent demands on the cartilage regenerative materials with shear responsiveness and lubrication. Here, a new type of injectable hydrogel composed of oxidized hyaluronic acid (OHA), adipic dihydrazide-grafted hyaluronic acid (HA-ADH), oxidized chondroitin sulfate (OChs), and decellularized extracellular matrix methacrylate (dECMMA) was fabricated. The aldehyde groups in OHA and OChs reacted with the amino groups in HA-ADH to form a dynamic hydrogel, which was then covalently crosslinked with dECMMA to create a dual-crosslinked hydrogel with sufficient mechanical strength.
View Article and Find Full Text PDFCartilage defects in large joints are a common occurrence in numerous degenerative diseases, especially in osteoarthritis. The hydrogel-on-metal composite has emerged as a potential candidate material, as hydrogels, to some extent, replicate the composition of human articular cartilage consisting of collagen fibers and proteoglycans. However, achieving tough bonding between the hydrogel and titanium alloy remains a significant challenge due to the swelling of the hydrogel in a liquid medium.
View Article and Find Full Text PDFJ Mech Behav Biomed Mater
April 2024
Osteoarthritis is a degenerative disease that is widely found in the elderly population, with a trend towards a younger age group in recent years. In the early stages of arthritis, patients are treated with hyaluronic acid injections and anti-inflammatory drugs. However, it has been found that hyaluronic acid can only play a supportive role and does not have a lubricating effect, and due to the absence of blood vessels, nerves, and lymphatic vessels in the articular cartilage, the oral anti-inflammatory drugs cannot reach the interface of the inflammatory joints adequately, and the drug utilisation rate is low.
View Article and Find Full Text PDFTrauma-induced articular cartilage damages are common in clinical practice. Hydrogels have been used to fill the cartilage defects and act as extracellular matrices for cell migration and tissue regeneration. Lubrication and stability of the filler materials are essential to achieve a satisfying healing effect in cartilage regeneration.
View Article and Find Full Text PDFCorrosion is an irreversible phenomenon in nature that has been a major source of metal degradation. We herein provide a unique approach for embedding nanoparticles into epoxy resins via hydrogen bonding adsorption of in situ hydrophilic silica. Based on this adsorption action, a super-anticorrosive epoxy-based Teflon (MEP-PTFE) coating for usage on metals such as aluminum alloys was developed utilizing one-step dip coating, with promising engineering and public applications.
View Article and Find Full Text PDFConversion of solar energy into thermal energy stored in phase change materials (PCMs) can effectively relieve the energy dilemma and improve energy utilization efficiency. However, facile fabrication of form-stable PCMs (FSPCMs) to achieve simultaneously energetic solar-thermal, conversion and storage remains a formidable challenge. Herein, we report a desirable solar-thermal energy conversion and storage system that utilizes paraffin (PW) as energy-storage units, the silver/polypyrrole-functionalized polyurethane (PU) foam as the cage and energy conversion platform to restrain the fluidity of the melting paraffin and achieve high solar-thermal energy conversion efficiency (93.
View Article and Find Full Text PDFPolyetheretherketone (PEEK) is widely considered as a promising material for joint implants but it still has limitations involving high friction and wear. To mimic the cartilage-subchondral bone structure in natural joints, a polyvinyl alcohol (PVA) hydrogel layer was fabricated on the PEEK substrate to provide a lubrication mechanism. In addition, tannic acid was applied to form dynamic hydrogen bonds with PVA molecules, for the purpose of strengthening the hydrogel layer and endowing it with self-healing ability.
View Article and Find Full Text PDFJ Mech Behav Biomed Mater
December 2020
The biocompatible high-performance material PEEK (polyetheretherketone) is an attractive implant material, however, its hydrophobicity and high friction coefficients severely hinder its biomedical applications. Thus, it is inferred from the recent advances in surface modification technology, achieving the biomimetic natural joint lubrication systems on PEEK still remains a challenge. In view of the above, herein we proposed a novel two-step strategy to fabricate a "soft (dual cross-linked hydrogel) layer-hard (PEEK) substrate" texture that mimics the structure and function of soft cartilage on the hard basal bone in joints.
View Article and Find Full Text PDFBiopolymer-based hydrogels with sustained drug release capability and antibacterial activity have exhibited great potential in clinical application in drug delivery and wound healing. In this study, a new type of composite wound dressing hydrogel aiming at avoiding wound infection was developed through embedding drug loaded gellan gum microspheres (GMs) into a doubly crosslinked hydrogel, which was constructed by Schiff-base crosslinking of oxidized gellan gum (OG) (pre-crosslinked by calcium ion) and carboxymethyl chitosan (CMCS). The gelation time, swelling index, degradation rate and mechanical properties of the blank hydrogel was optimized by varying the ratios of CMCS/OG (w/w) with fixed OG/calcium (w/w) ratio.
View Article and Find Full Text PDFJ Biomed Mater Res B Appl Biomater
July 2020
We develop a fluorine-free preparation of the superhydrophobic surface on an aluminum alloy with anticorrosion performance and mechanical robustness. The surface morphology, chemical composition, and water repellency were determined with SEM, CLSM, EDS, FT-IR, TG, and contact-angle measurements, respectively. The aluminum matrix superhydrophobic surface (STA-PDMS-ZnO sample) was able to display excellent repellency to water with a WCA of 152° and a WSA of 2°.
View Article and Find Full Text PDFSlippery surfaces were prepared by infusing lubricant into smooth or hierarchical-structured superhydrophobic surfaces (SHS) to compare different surface-free energies. The surfaces obtained showed good repellency towards liquids with various values of surface tension/molecular polarity/viscosity, including hexane, tetradecane, water, ethylene glycol and viscous engine oil. The lyophobicity could be realized on a relatively smooth surface, indicating that the first principle of preparing a lyophobic slippery surface is to perform a low surface-free energy modification.
View Article and Find Full Text PDFIn order to broaden the abilities of injectable hydrogel scaffolds, a self-healing chitosan/alginate hydrogel encapsulated with magnetic gelatin microspheres (MGMs) was prepared for anti-cancer drug delivery and soft tissue engineering. The hydrogel was formulated by cross-linking carboxyethyl chitosan (CEC) and oxidized alginate (OAlg) via the Schiff-base reaction. To strengthen the mechanical and biological capabilities of hydrogel, MGMs containing 5-fluorouracil (5-Fu) were prepared by an emulsion cross-linking method.
View Article and Find Full Text PDFHydrogels based scaffolds are very promising materials for a wide range of medical applications including tissue engineering and drug delivery. This study reports a covalently cross-linked composite hydrogel embedded with microspheres basing natural polysaccharides as a protein delivery system for soft tissue engineering. This biodegradable composite hydrogel derived from water-soluble chitosan and alginate derivatives upon mixing, without addition of chemical cross-linking agents.
View Article and Find Full Text PDFGadolinium-based macromolecular magnetic resonance imaging (MRI) contrast agents (CAs) have attracted increasing interest in tumor diagnosis. However, their practical application is potentially limited because the long-term retention of gadolinium ion in vivo will induce toxicity. Here, a nanoglobular MRI contrast agent (CA) PAMAM-PG- g-s-s-DOTA(Gd) + FA was designed and synthesized on the basis of the facile host-guest interaction between β-cyclodextrin and adamantane, which initiated the self-assembly of poly(glycerol) (PG) separately conjugated with gadolinium chelates by disulfide bonds and folic acid (FA) molecule onto the surface of poly(amidoamine) (PAMAM) dendrimer, finally realizing the biodegradability and targeting specificity.
View Article and Find Full Text PDFTo meet the progressive requirements for bone regeneration purpose, injectable hydrogels have attracted increasing attention in tissue regeneration and local drug delivery applications. In this study, we report a facile method to prepare injectable and degradable polysaccharide-based hydrogels doubly integrated with hydroxyapatite (HAp) nanoparticles and calcium carbonate microspheres (CMs) under physiological condition. The mechanism of cross-linking is attributed to the Schiff-base reaction between amino and aldehyde groups of carboxymethyl chitosan (CMCS) and oxidized alginate (OAlg), respectively.
View Article and Find Full Text PDFMater Sci Eng C Mater Biol Appl
September 2018
To improve the tribological properties of Ti6Al4V alloy to realize the application in artificial joints, a novel composite coating was designed and fabricated on its surface through the combination of two different surface modification techniques-micro-arc oxidation (MAO) and grafting hydrophilic polymer. The characterizations of morphologies and composition of MAO layer were examined using scanning electron microscopy (SEM), energy dispersive spectroscope (EDS) and X-ray diffraction (XRD). It was found that a TiO layer displaying uniform porous structure formed on the surface based on the optimal MAO parameters of an oxidation voltage of 450 V and an oxidation time of 60 min.
View Article and Find Full Text PDFPoor surface wettability and relative high friction coefficients of pristine polyetheretherketone (PEEK) have limited its application in orthopedic implants. In this study, inspired by the structure of natural articular cartilage, we presented a novel method to fabricate a "soft-on-hard" structure on the surface of pristine PEEK specimens, which combined a soft polyvinyl alcohol (PVA) hydrogel layer and a three-dimensional porous layer with PEEK substrates. A variety of analytical methods were used to evaluate their properties, our results demonstrated that the hydrogel layer could be seamlessly connected with substrate, and the hydrogel-covered PEEK owned a highly hydrophilic surface, a very low water contact angle of 7° could be obtained.
View Article and Find Full Text PDFGadolinium-based macromolecular contrast agents (CAs) with favorable biocompatibility, targeting specificity, and high relaxivity properties are desired for magnetic resonance imaging (MRI) of tumors. Herein, a novel triblock polymeric micelle based on poly(glycerol) (PG) and poly(ε-caprolactone) (PCL) was designed as a nanocarrier to fabricate a tumor targeted contrast agent (CA). Through conjugating gadolinium chelates and folic acid (FA) molecules to the PG block, a triblock-micelle contrast agent (T-micelle) formed from self-assembly demonstrated a low critical micelle concentration (CMC) of 6 mg L and a hydrodynamic diameter of about 250 nm.
View Article and Find Full Text PDFMater Sci Eng C Mater Biol Appl
June 2017
The keys of biomaterials application in artificial joints are good hydrophilicity and wear resistance. One kind of the potential bio-implant materials is polyetheretherketone (PEEK), which has some excellent properties such as non-toxic and good biocompatibility. However, its bioinert surface and inherent chemical inertness hinder its application.
View Article and Find Full Text PDFTissue engineering for articular cartilage repair has shown success in ensuring the integration of neocartilage with surrounding tissue, but the rapid restoration of biomechanical and biotribological functions remains a significant challenge. Poly (vinyl alcohol) (PVA) hydrogel is regarded as a potential articular cartilage replacement for its fair mechanical strength and low surface friction, while its lack of bioactivity limits its utility. Combining the advantages of tissue engineering materials and PVA hydrogel, we developed a semi-degradable porous PVA hydrogel through addition of ploy (lactic-co-glycolic acid) (PLGA) microspheres and salt-leaching technique.
View Article and Find Full Text PDF