Physico-chemical characterization and possible uses of sludge processed from an urban sewage treatment plant.

Nowadays, the challenge is to transform dehydrated sewage sludge resulting from wastewater treatment plants from waste into resource. Following this objective, the sludge was further dried and submitted to X-ray diffraction (XRD) and FTIR analysis. The sludge was first dried in ventilated and unventilated spaces at 50 C and 100 C, for 60 and 100 minutes (min) in each case.

Studies on Hot-Rolling Bonding of the Al-Cu Bimetallic Composite.

Through the approaches in this article, an attempt was made to analyze the bonding of Al-Cu bimetallic composite layers and the highlight of the diffusion at the boundary between the layers, by hot rolling. An aluminum alloy 6060 plate (EN-AW AlMgSi) and a Cu-ETP ½ hard (CW004A) plate were used. All of these layers of materials were TIG-welded, at both ends, into a heat-treated layered composite and subsequently subjected to the hot-rolling process.

The Behavior of a Zn-Al Anticorrosive Coating in the Wiredrawing Process.

The present paper describes and quantifies the behavior of a Zn-Al anticorrosive coating deposited on the surface of a steel wire before its drawing process. For the complete evaluation of this behavior, the drawing of these samples was performed on four wiredrawing lines, differing by the deformation angle 2 · α of the component dies of each line. For good agreement with industrial practice, the drawing series used a partial reduction of the section of 20%.

Biological Activated Sludge from Wastewater Treatment Plant before and during the COVID-19 Pandemic.

The COVID-19 pandemic and the related measures brought a change in daily life that affected the characteristics of the municipal wastewater and further, of the biological activated sludge. The activated sludge process is the most widely used biological wastewater treatment process in developed areas. In this paper, we aim to show the situation of specific investigations concerning the variation of the physicochemical parameters and biological composition of the activated sludge from one conventional wastewater treatment plant from a metropolitan area.