Toward Translational Impact of Low-Glucose Strategies on Red Blood Cell Storage Optimization.

Transfusion of stored red blood cells (RBCs) to patients is a critical component of human healthcare. Following purification from whole blood, RBCs are stored in one of many media known as additive solutions for up to 42 days. However, during the storage period, the RBCs undergo adverse chemical and physical changes that are often collectively known as the RBC storage lesion.

A 3D-printed multi-compartment device that enables dynamic PK/PD profiles of antibiotics.

Pathogens develop resistance to various drugs while under the selective pressure of antibiotics resulting in the emergence of bacterial strains that are resistant to multiple treatment options. Unfortunately, the resistance to antibiotics has also been accompanied by a reduction in the development of novel antibiotics to combat various pathogens. Current diagnostic tools, which are used in parts of the early developmental process of antibiotics, primarily consist of static susceptibility tests that do not resemble the pharmacokinetics of the therapy in vivo.

A 3D-printed, multi-modal microfluidic device for measuring nitric oxide and ATP release from flowing red blood cells.

In this paper, a 3D-printed multi-modal device was designed and fabricated to simultaneously detect nitric oxide (NO) and adenosine triphosphate (ATP) in red blood cell suspensions prepared from whole blood. Once a sample was injected into the device, NO was first detected ( amperometry) using a three-electrode, dual-opposed, electrode configuration with a platinum-black/Nafion coated gold working electrode. After in-line amperometric detection of NO, ATP was detected a chemiluminescence reaction, with a luciferin/luciferase solution continuously pumped into an integrated mixing T and the resulting light being measured with a PMT underneath the channel.

Albumin Glycation Affects the Delivery of C-Peptide to the Red Blood Cells.

Serum albumin is a prominent plasma protein that becomes modified in hyperglycemic conditions. In a process known as glycation, these modifications can change the structure and function of proteins, which decrease ligand binding capabilities and alter the bioavailability of ligands. C-peptide is a molecule that binds to the red blood cell (RBC) and stimulates the release of adenosine triphosphate (ATP), which is known to participate in the regulation of blood flow.

Specific Binding of Leptin to Red Blood Cells Delivers a Pancreatic Hormone and Stimulates ATP Release.

Since its discovery in 1994, leptin continues to have new potential physiological roles uncovered, including a role in the regulation of blood flow. Leptin's role in regulating blood flow is not completely understood. Red blood cell (RBC)-derived ATP is a recognized stimulus of blood flow, and multiple studies suggest that C-peptide, a hormone secreted in equimolar amounts with insulin from the pancreatic β-cells, can stimulate that release when delivered by albumin and in combination with Zn.

A novel 3D-printed centrifugal ultrafiltration method reveals in vivo glycation of human serum albumin decreases its binding affinity for zinc.

Plasma proteins are covalently modified in vivo by the high-glucose conditions in the bloodstreams of people with diabetes, resulting in changes to both structure and function. Human Serum Albumin (HSA) functions as a carrier-protein in the bloodstream, binding various ligands and tightly regulating their bioavailability. HSA is known to react with glucose via the Maillard reaction, causing adverse effects on its ability to bind and deliver certain ligands, such as metals.

Review of 3D Cell Culture with Analysis in Microfluidic Systems.

A review with 105 references that analyzes the emerging research area of 3D cell culture in microfluidic platforms with integrated detection schemes. Over the last several decades a central focus of cell culture has been the development of better mimics. This has led to the evolution from planar cell culture to cell culture on 3D scaffolds, and the incorporation of cell scaffolds into microfluidic devices.

PolyJet 3D-Printed Enclosed Microfluidic Channels without Photocurable Supports.

Microfluidic devices have historically been prepared using fabrication techniques that often include photolithography and/or etching. Recently, additive manufacturing technologies, commonly known as 3D-printing, have emerged as fabrication tools for microfluidic devices. Unfortunately, PolyJet 3D-printing, which utilizes a photocurable resin that can be accurately printed, requires the use of support material for any designed void space internal to the model.

A rapid method for post-antibiotic bacterial susceptibility testing.

Antibiotic susceptibility testing is often performed to determine the most effective antibiotic treatment for a bacterial infection, or perhaps to determine if a particular strain of bacteria is becoming drug resistant. Such tests, and others used to determine efficacy of candidate antibiotics during the drug discovery process, have resulted in a demand for more rapid susceptibility testing methods. Here, we have developed a susceptibility test that utilizes chemiluminescent determination of ATP release from bacteria and the overall optical density (OD600) of the bacterial solution.

Ultrafiltration binding analyses of glycated albumin with a 3D-printed syringe attachment.

Protein-ligand binding assays facilitate the understanding of biomolecular interactions. Classical equilibrium dialysis methods are often used for accurate determination of binding properties. While accurate, the long equilibration times associated with the technique (> 6 h) hinder throughput.

A Printed Equilibrium Dialysis Device with Integrated Membranes for Improved Binding Affinity Measurements.

Equilibrium dialysis is a simple and effective technique used for investigating the binding of small molecules and ions to proteins. A three-dimensional (3D) printer was used to create a device capable of measuring binding constants between a protein and a small ion based on equilibrium dialysis. Specifically, the technology described here enables the user to customize an equilibrium dialysis device to fit their own experiments by choosing membranes of various material and molecular-weight cutoff values.

3D-printed Microfluidic Devices: Fabrication, Advantages and Limitations-a Mini Review.

A mini-review with 79 references. In this review, the most recent trends in 3D-printed microfluidic devices are discussed. In addition, a focus is given to the fabrication aspects of these devices, with the supplemental information containing detailed instructions for designing a variety of structures including: a microfluidic channel, threads to accommodate commercial fluidic fittings, a flow splitter; a well plate, a mold for PDMS channel casting; and how to combine multiple designs into a single device.

An In Vitro Diagnostic for Multiple Sclerosis Based on C-peptide Binding to Erythrocytes.

Objective: To investigate the utility of a blood-based lab test as an aid in identifying patients with Multiple Sclerosis (MS).

Methods: Whole blood from subjects with MS, non-MS neurologic diseases, and healthy controls was centrifuged to isolate erythrocytes. Following the addition of exogenous C-peptide, the supernatant was assayed for remaining C-peptide using an enzyme linked immunosorbent assay (ELISA).

Drug penetration and metabolism in 3D cell cultures treated in a 3D printed fluidic device: assessment of irinotecan via MALDI imaging mass spectrometry.

Realistic in vitro models are critical in the drug development process. In this study, a novel in vitro platform is employed to assess drug penetration and metabolism. This platform, which utilizes a 3D printed fluidic device, allows for dynamic dosing of three dimensional cell cultures, also known as spheroids.

A Diffusion-Based and Dynamic 3D-Printed Device That Enables Parallel in Vitro Pharmacokinetic Profiling of Molecules.

The process of bringing a drug to market involves many steps, including the preclinical stage, where various properties of the drug candidate molecule are determined. These properties, which include drug absorption, distribution, metabolism, and excretion, are often displayed in a pharmacokinetic (PK) profile. While PK profiles are determined in animal models, in vitro systems that model in vivo processes are available, although each possesses shortcomings.

Polymer Coatings in 3D-Printed Fluidic Device Channels for Improved Cellular Adherence Prior to Electrical Lysis.

This paper describes the design and fabrication of a polyjet-based three-dimensional (3D)-printed fluidic device where poly(dimethylsiloxane) (PDMS) or polystyrene (PS) were used to coat the sides of a fluidic channel within the device to promote adhesion of an immobilized cell layer. The device was designed using computer-aided design software and converted into an .STL file prior to printing.

C-peptide and zinc delivery to erythrocytes requires the presence of albumin: implications in diabetes explored with a 3D-printed fluidic device.

People with type 1 diabetes (T1D) must administer insulin exogenously due to the destruction of their pancreatic β-cells. Endogenous insulin is stored in β-cell granules along with C-peptide, a 31 amino acid peptide that is secreted from these granules in amounts equal to insulin. Exogenous co-administration of C-peptide with insulin has proven to reduce diabetes-associated complications in animals and humans.

Microfluidic device with tunable post arrays and integrated electrodes for studying cellular release.

In this paper, we describe the development of a planar, pillar array device that can be used to image either side of a tunable membrane, as well as sample and detect small molecules in a cell-free region of the microchip. The pores are created by sealing two parallel PDMS microchannels (a cell channel and a collector channel) over a gold pillar array (5 or 10 μm in height), with the device being characterized and optimized for small molecule cross-over while excluding a flowing cell line (here, red blood cells, RBCs). The device was characterized in terms of the flow rate dependence of analyte cross-over and cell exclusion as well as the ability to perform amperometric detection of catechol and nitric oxide (NO) as they cross-over into the collector channel.

3D printed microfluidic devices with integrated versatile and reusable electrodes.

We report two 3D printed devices that can be used for electrochemical detection. In both cases, the electrode is housed in commercially available, polymer-based fittings so that the various electrode materials (platinum, platinum black, carbon, gold, silver) can be easily added to a threaded receiving port printed on the device; this enables a module-like approach to the experimental design, where the electrodes are removable and can be easily repolished for reuse after exposure to biological samples. The first printed device represents a microfluidic platform with a 500 × 500 μm channel and a threaded receiving port to allow integration of either polyetheretherketone (PEEK) nut-encased glassy carbon or platinum black (Pt-black) electrodes for dopamine and nitric oxide (NO) detection, respectively.

3D-printed fluidic devices enable quantitative evaluation of blood components in modified storage solutions for use in transfusion medicine.

A fluidic device constructed with a 3D-printer can be used to investigate stored blood components with subsequent high-throughput calibration and readout with a standard plate reader.

Endothelium-derived nitric oxide production is increased by ATP released from red blood cells incubated with hydroxyurea.

Red blood cells (RBCs) release adenosine triphosphate (ATP) in response to a variety of stimuli, including flow-induced deformation. Hydroxyurea (HU), a proven therapy for individuals with sickle cell disease (SCD), is known to improve blood flow. However, the exact mechanism leading to the improved blood flow is incomplete.

Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences.

Nearing 30 years since its introduction, 3D printing technology is set to revolutionize research and teaching laboratories. This feature encompasses the history of 3D printing, reviews various printing methods, and presents current applications. The authors offer an appraisal of the future direction and impact this technology will have on laboratory settings as 3D printers become more accessible.

Microfluidic evaluation of red cells collected and stored in modified processing solutions used in blood banking.

The most recent American Association of Blood Banks survey found that 40,000 units of blood are required daily for general medicine, hematology/oncology, surgery, and for accident and trauma victims. While blood transfusions are an extremely important component of critical healthcare, complications associated with transfusion of blood components still exist. It is well-established that the red blood cell (RBC) undergoes many physical and chemical changes during storage.