Precise Control of Molecular Weight Characteristics of Charge-Shifting Poly(2-(N,N-Dimethylamino)Ethylacrylate) Synthesized by Reversible Addition-Fragmentation Chain Transfer Polymerization.

Poly(2-(N,N-dimethylamino)ethyl acrylate) (PDMAEA) is a promising charge-shifting polycation with the capacity to form a range of morphologically distinct polyelectrolyte assemblies. Nevertheless, the basic character of the monomer and its hydrolytic instability impedes its controlled synthesis to higher molecular weight (MW). Herein, the reversible addition-fragmentation chain transfer polymerization of DMAEA is reported using a tert-butanol/V70 initiator/trithiocarbonate-based chain transfer agent (CTA) polymerization setup.

Layer-by-layer assembly of poly-l-lysine/hyaluronic acid protein reservoirs on poly(glycerol sebacate) surfaces.

The modification of biomaterial surfaces has become increasingly relevant in the context of ongoing advancements in tissue engineering applications and the development of tissue-mimicking polymer materials. In this study, we investigated the layer-by-layer (LbL) deposition of polyelectrolyte multilayer protein reservoirs consisting of poly-l-lysine (PLL) and hyaluronic acid (HA) on the hydrophobic surface of poly(glycerol sebacate) (PGS) elastomer. Using the methods of isothermal titration calorimetry and surface plasmon resonance, we systematically investigated the interactions between the polyelectrolytes and evaluated the deposition process in real time, providing insight into the phenomena associated with film assembly.

Quaternized Chitosan/Heparin Polyelectrolyte Multilayer Films for Protein Delivery.

Layer-by-layer (LbL) polyelectrolyte coatings are intensively studied as reservoirs of bioactive proteins for modulating interactions between biomaterial surfaces and cells. Mild conditions for the incorporation of growth factors into delivery systems are required to maintain protein bioactivity. Here, we present LbL films composed of water-soluble -[(2-hydroxy-3-trimethylammonium)propyl] chitosan chloride (HTCC), heparin (Hep), and tannic acid (TA) fabricated under physiological conditions with the ability to release heparin-binding proteins.

Complexation of CXCL12, FGF-2 and VEGF with Heparin Modulates the Protein Release from Alginate Microbeads.

Long-term delivery of growth factors and immunomodulatory agents is highly required to support the integrity of tissue in engineering constructs, e.g., formation of vasculature, and to minimize immune response in a recipient.

pH-responsive and antibacterial properties of self-assembled multilayer films based on chitosan and tannic acid.

Polyelectrolyte layer-by-layer (LbL) films that disintegrate under physiological conditions are intensively studied as coatings to enable the release of bioactive components. Herein, we report on the interactions and pH-stability of LbL films composed of chitosan (CH) or N-(2-hydroxypropyl)-3-trimethylammonium chitosan chloride (CMCH) and tannic acid (TA), employed to guarantee the film disintegration. The self-assembly of TA with CH and CMCH at pH 5 and with CMCH at pH 7.

Correction: Bioengineering a pre-vascularized pouch for subsequent islet transplantation using VEGF-loaded polylactide capsules.

Correction for 'Bioengineering a pre-vascularized pouch for subsequent islet transplantation using VEGF-loaded polylactide capsules' by Naresh Kasoju et al., Biomater. Sci.

Bioengineering a pre-vascularized pouch for subsequent islet transplantation using VEGF-loaded polylactide capsules.

The effectiveness of cell transplantation can be improved by optimization of the transplantation site. For some types of cells that form highly oxygen-demanding tissue, e.g.

Effect of Blood Component Coatings of Enosseal Implants on Proliferation and Synthetic Activity of Human Osteoblasts and Cytokine Production of Peripheral Blood Mononuclear Cells.

The study monitored in vitro early response of connective tissue cells and immunocompetent cells to enosseal implant materials coated by different blood components (serum, activated plasma, and plasma/platelets) to evaluate human osteoblast proliferation and synthetic activity and inflammatory response presented as a cytokine profile of peripheral blood mononuclear cells (PBMCs) under conditions imitating the situation upon implantation. The cells were cultivated on coated Ti-plasma-sprayed (Ti-PS), Ti-etched (Ti-Etch), Ti-hydroxyapatite (Ti-HA), and ZrO2 surfaces. The plasma/platelets coating supported osteoblast proliferation only on osteoconductive Ti-HA and Ti-Etch whereas activated plasma enhanced proliferation on all surfaces.

Polymer scaffolds with no skin-effect for tissue engineering applications fabricated by thermally induced phase separation.

Thermally induced phase separation (TIPS) based methods are widely used for the fabrication of porous scaffolds for tissue engineering and related applications. However, formation of a less-/non-porous layer at the scaffold's outer surface at the air-liquid interface, often known as the skin-effect, restricts the cell infiltration inside the scaffold and therefore limits its efficacy. To this end, we demonstrate a TIPS-based process involving the exposure of the just quenched poly(lactide-co-caprolactone):dioxane phases to the pure dioxane for a short time while still being under the quenching strength, herein after termed as the second quenching (2Q).

Silk fibroin gelation via non-solvent induced phase separation.

Tissue engineering benefits from novel materials with precisely tunable physical, chemical and mechanical properties over a broad range. Here we report a practical approach to prepare Bombyx mori silk fibroin hydrogels using the principle of non-solvent induced phase separation (NIPS). A combination of reconstituted silk fibroin (RSF) and methanol (non-solvent), with a final concentration of 2.

Cellular Responses Modulated by FGF-2 Adsorbed on Albumin/Heparin Layer-by-Layer Assemblies.

In a typical cell culture system, growth factors immobilized on the cell culture surfaces can serve as a reservoir of bio-signaling molecules, without the need to supplement them additionally into the culture medium. In this paper, we report on the fabrication of albumin/heparin (Alb/Hep) assemblies for controlled binding of basic fibroblast growth factor (FGF-2). The surfaces were constructed by layer-by-layer adsorption of polyelectrolytes albumin and heparin and were subsequently stabilized by covalent crosslinking with glutaraldehyde.

Self-assembled anchor layers/polysaccharide coatings on titanium surfaces: a study of functionalization and stability.

Composite materials based on a titanium support and a thin, alginate hydrogel could be used in bone tissue engineering as a scaffold material that provides biologically active molecules. The main objective of this contribution is to characterize the activation and the functionalization of titanium surfaces by the covalent immobilization of anchoring layers of self-assembled bisphosphonate neridronate monolayers and polymer films of 3-aminopropyltriethoxysilane and biomimetic poly(dopamine). These were further used to bind a bio-functional alginate coating.

Dip TIPS as a facile and versatile method for fabrication of polymer foams with controlled shape, size and pore architecture for bioengineering applications.

The porous polymer foams act as a template for neotissuegenesis in tissue engineering, and, as a reservoir for cell transplants such as pancreatic islets while simultaneously providing a functional interface with the host body. The fabrication of foams with the controlled shape, size and pore structure is of prime importance in various bioengineering applications. To this end, here we demonstrate a thermally induced phase separation (TIPS) based facile process for the fabrication of polymer foams with a controlled architecture.

Polylactide nanofibers with hydroxyapatite as growth substrates for osteoblast-like cells.

Various types of nanofibers are increasingly used in tissue engineering, mainly for their ability to mimic the architecture of tissue at the nanoscale. We evaluated the adhesion, growth, viability, and differentiation of human osteoblast-like MG 63 cells on polylactide (PLA) nanofibers prepared by needle-less electrospinning and loaded with 5 or 15 wt % of hydroxyapatite (HA) nanoparticles. On day 7 after seeding, the cell number was the highest on samples with 15 wt % of HA.

Adhesion and growth of vascular smooth muscle cells in cultures on bioactive RGD peptide-carrying polylactides.

The surface of poly(L-lactide) (PLLA) films deposited on glass coverslips was modified with poly(DL-lactide) (PDLLA), or 1:4 mixtures of PDLLA and PDLLA-b-PEO block copolymers, in which either none, 5% or 20% of the copolymer molecules carried a synthetic extracellular matrix-derived ligand for integrin adhesion receptors, the GRGDSG oligopeptide, attached to the end of the PEO chain. The materials, perspective for vascular tissue engineering, were seeded with rat aortic smooth muscle cells (11,000 cells/cm(2)) and the adhesion, spreading, DNA synthesis and proliferation of these cells was followed on inert and bioactive surfaces. In 24-h-old cultures in serum-supplemented media, the number of cells adhering to the PDLLA-b-PEO copolymer was almost eight times lower than that on the control PDLLA surface.

Adhesion and growth of rat aortic smooth muscle cells on lactide-based polymers.

Biodegradable materials based on polymers of hydroxy acids are studied for application in artificial vascular substitutes. Polymers with functional surfaces are being developed, carrying specific recognition structures to affect selectively the adhesion and proliferation of endothelial cells (EC) and vascular smooth muscle cells (VSMC). This preliminary study focuses on evaluation of adhesion and growth of VSMC on surfaces of polylactide polymers and those modified by amphiphilic polylactide/poly(ethylene oxide) copolymers.