Exploring Microemulsion Systems for the Incorporation of Glucocorticoids into Bacterial Cellulose: A Novel Approach for Anti-Inflammatory Wound Dressings.

The effective pharmacological treatment of inflamed wounds such as pyoderma gangraenosum remains challenging, as the systemic application of suitable drugs such as glucocorticoids is compromised by severe side effects and the inherent difficulties of wounds as drug targets. Furthermore, conventional semi-solid formulations are not suitable for direct application to open wounds. Thus, the treatment of inflamed wounds could considerably benefit from the development of active wound dressings for the topical administration of anti-inflammatory drugs.

In situ Formation of Polymer Microparticles in Bacterial Nanocellulose Using Alternative and Sustainable Solvents to Incorporate Lipophilic Drugs.

Bacterial nanocellulose has been widely investigated in drug delivery, but the incorporation of lipophilic drugs and controlling release kinetics still remain a challenge. The inclusion of polymer particles to encapsulate drugs could address both problems but is reported sparely. In the present study, a formulation approach based on in situ precipitation of poly(lactic-co-glycolic acid) within bacterial nanocellulose was developed using and comparing the conventional solvent -methyl-2-pyrrolidone and the alternative solvents poly(ethylene glycol), Cyrene and ethyl lactate.

Bacterial nanocellulose patches as a carrier for hydrating formulations to improve the topical treatment of nail diseases.

Bacterial nanocellulose has been widely investigated for wound healing applications, mainly due to its moisturizing capabilities and biocompatibility. Even though the topical therapy of nail diseases could benefit from these properties, this application has not yet been investigated. Therefore, actively hydrating nail patches based on bacterial nanocellulose were developed to improve the delivery of ciclopirox olamine and Boswellia serrata extract through the nail plate.

Bacterial Cellulose as Drug Delivery System for Optimizing Release of Immune Checkpoint Blocking Antibodies.

Immune checkpoint blocking therapy is a promising cancer treatment modality, though it has limitations such as systemic toxicity, which can often be traced to uncontrolled antibody spread. Controlling antibody release with delivery systems is, therefore, an attractive approach to reduce systemic antibody spread and potentially mitigate the side effects of checkpoint immunotherapy. Here, bacterial cellulose (BC) was produced and investigated as a delivery system for optimizing checkpoint-blocking antibody delivery.

Bacterial Cellulose-Adaptation of a Nature-Identical Material to the Needs of Advanced Chronic Wound Care.

Modern wound treatment calls for hydroactive dressings. Among the variety of materials that have entered the field of wound care in recent years, the carbohydrate polymer bacterial cellulose (BC) represents one of the most promising candidates as the biomaterial features a high moisture-loading and donation capacity, mechanical stability, moldability, and breathability. Although BC has already gained increasing relevance in the treatment of burn wounds, its potential and clinical performance for "chronic wound" indications have not yet been sufficiently investigated.

Controlled Release of the α-Tocopherol-Derived Metabolite α-13'-Carboxychromanol from Bacterial Nanocellulose Wound Cover Improves Wound Healing.

Inflammation is a hallmark of tissue remodeling during wound healing. The inflammatory response to wounds is tightly controlled and well-coordinated; dysregulation compromises wound healing and causes persistent inflammation. Topical application of natural anti-inflammatory products may improve wound healing, in particular under chronic pathological conditions.

Modified Bacterial Cellulose Dressings to Treat Inflammatory Wounds.

Natural products suited for prophylaxis and therapy of inflammatory diseases have gained increasing importance. These compounds could be beneficially integrated into bacterial cellulose (BC), which is a natural hydropolymer applicable as a wound dressing and drug delivery system alike. This study presents experimental outcomes for a natural anti-inflammatory product concept of boswellic acids from frankincense formulated in BC.

Overcoming the hydrophilicity of bacterial nanocellulose: Incorporation of the lipophilic coenzyme Q10 using lipid nanocarriers for dermal applications.

Although used in a wide range of medical and pharmaceutical applications, the potential of the natural biopolymer bacterial nanocellulose (BNC) as drug delivery system is by far not fully exploited. Particularly, the incorporation of lipophilic drugs is still considered as an unsolved task. In the present study, the homogeneous incorporation of the lipophilic coenzyme Q10 (CoQ10) into BNC was accomplished by several post-synthesis techniques utilizing different nanoemulsions and liposomes.

Development and characterization of bacterial nanocellulose loaded with Boswellia serrata extract containing nanoemulsions as natural dressing for skin diseases.

The combination of the anti-inflammatory lipophilic Boswellia serrata extract with the natural hydropolymer bacterial nanocellulose (BNC) for the treatment of skin diseases is counteracted by their different hydro/lipophilicity. To overcome the hydrophilicity of the BNC, the water in its network was exchanged by single and double nanoemulsions. Incorporation of the Boswellia serrata extract in the nanoemulsions formed particles of about 115 to 150 nm with negative zeta potential and storage stability over 30 days at temperatures between 4 and 32 °C.

Doxorubicin Loaded Poloxamer Thermosensitive Hydrogels: Chemical, Pharmacological and Biological Evaluation.

(1) Background: doxorubicin is a potent chemotherapeutic agent, but it has limitations regarding its side effects and therapy resistance. Hydrogels potentially deal with these problems, but several characterizations need to be optimized to better understand how hydrogel assisted chemotherapy works. Poloxamer 407 (P407) hydrogels were mixed with doxorubicin and physico-chemical, biological, and pharmacological characterizations were considered.

Thermosensitive hydrogels as sustained drug delivery system for CTLA-4 checkpoint blocking antibodies.

Thermosensitive poloxamer 407 (P407) hydrogels were evaluated as slow release system for optimizing CTLA-4 therapy. Slow release reduces systemic antibody levels and potentially mitigates the side effects of CTLA-4 therapy. The 25% P407 hydrogel is injectable at room temperature and depots are established quickly after subcutaneous injection.

Bacterial nanocellulose as novel carrier for intestinal epithelial cells in drug delivery studies.

Synthetic cell carriers (A) represent common scaffold structures for the development of cell-based in vitro models of the human intestine but due to their low porosity or unwanted molecular adhesion effects, synthetic carriers can negatively affect cell function. Alternative scaffolds such as natural extracellular matrices (ECMs) (B) were shown to overcome some of the common drawbacks. However, their fabrication is time-consuming, less well standardized and not entirely conform to the 3R principle (replacement, reduction, refinement).

Process control and scale-up of modified bacterial cellulose production for tailor-made anti-inflammatory drug delivery systems.

Bacterial cellulose (BC) has proven its high potential as active wound dressing and drug delivery system in many scientific studies, but the transferability of the methods to efficient manufacturing still needs to be demonstrated. This study presents a technically feasible, straightforward and efficient approach to modify BC according to specific medical requirements, to scale-up the cultivation and to load the active pharmaceutical ingredient of interest. By means of in situ-modification of the network structure using water-soluble poly(ethylene glycol) 400 and 4000 on pilot-scale, up to 41.

Immobilization of plasmids in bacterial nanocellulose as gene activated matrix.

The synergy of the local delivery of nucleic acids using a hydrogel-based gene activated matrix (GAM) might support regenerative processes on a genetic level by concurrently providing a cell-friendly microenvironment. To investigate bacterial nanocellulose (BNC) as GAM, two plasmids (pSV-β-Gal and pGL3) were incorporated by reswelling and injection techniques forming matrix and core-shell systems as determined by SEM and staining experiments. The release was found to be dependent on the type of BNC, the plasmid and the loading technique, and lasted over at least 20 days.

Tailor-made material characteristics of bacterial cellulose for drug delivery applications in dentistry.

Bacterial cellulose (BC) has shown high potential as innovative wound dressing and drug delivery system. Bringing both together, drug-loaded BC was investigated for applications in dental therapies such as dental extraction or mucosal transplantation. Both applications would benefit from a material which degrades under physiological conditions, and from an antibiotic environment.

Opportunities of Bacterial Cellulose to Treat Epithelial Tissues.

In this mini-review, we highlight the potential of the biopolymer bacterial cellulose to treat damaged epithelial tissues. Epithelial tissues are cell sheets that delimitate both the external body surfaces and the internal cavities and organs. Epithelia serve as physical protection to underlying organs, regulate the diffusion of molecules and ions, secrete substances and filtrate body fluids, among other vital functions.

Combinatory therapy adopting nanoparticle-based cancer vaccination with immune checkpoint blockade for treatment of post-surgical tumor recurrences.

Cancer immunotherapy is emerging as a candidate treatment modality for treating post-surgical metastasis and recurrences. Despite the great promises with therapeutic cancer vaccines and checkpoint blocking antibodies in pre-clinical studies, response rates in the clinic still remain unsatisfactory. The evaluation of immunotherapy after surgery in patients could confront significant unexpected hurdles.

Bacterial nanocellulose stimulates mesenchymal stem cell expansion and formation of stable collagen-I networks as a novel biomaterial in tissue engineering.

Biomimetic scaffolds are of great interest to tissue engineering (TE) and tissue repair as they support important cell functions. Scaffold coating with soluble collagen-I has been used to achieve better tissue integration in orthopaedy, however, as collagen persistence was only temporary such efforts were limited. Adequate coverage with cell-derived ECM collagen-I would promise great success, in particular for TE of mechanically challenged tissues.

Bacterial nanocellulose: the future of controlled drug delivery?

Although bacterial nanocellulose (BNC), a natural nanostructured biopolymer network, offers unique material characteristics, the number of drug-loaded BNC-based carriers in clinical trials or on the market is still low. This report provides an overview of aspects still limiting the broad application of BNC as drug-delivery system and the challenges for its future applications. Continuous large-scale production, storability, the loading and controlled release of critical drugs, for example, with high molar mass or highly lipophilic character as well as the formulation of long-term release systems will be highlighted.

Antimicrobial functionalization of bacterial nanocellulose by loading with polihexanide and povidone-iodine.

Bacterial nanocellulose (BNC) is chemically identical with plant cellulose but free of byproducts like lignin, pectin, and hemicelluloses, featuring a unique reticulate network of fine fibers. BNC sheets are mostly obtained by static cultivation. Now, a Horizontal Lift Reactor may provide a cost efficient method for mass production.

Life cycle analysis within pharmaceutical process optimization and intensification: case study of active pharmaceutical ingredient production.

As the demand for new drugs is rising, the pharmaceutical industry faces the quest of shortening development time, and thus, reducing the time to market. Environmental aspects typically still play a minor role within the early phase of process development. Nevertheless, it is highly promising to rethink, redesign, and optimize process strategies as early as possible in active pharmaceutical ingredient (API) process development, rather than later at the stage of already established processes.

Active wound dressings based on bacterial nanocellulose as drug delivery system for octenidine.

Although bacterial nanocellulose (BNC) may serve as an ideal wound dressing, it exhibits no antibacterial properties by itself. Therefore, in the present study BNC was functionalized with the antiseptic drug octenidine. Drug loading and release, mechanical characteristics, biocompatibility, and antimicrobial efficacy were investigated.

OLEDs as prospective light sources for microstructured photoreactors.

In this work, the use of OLEDs as light sources to initiate photochemical reactions is presented for the first time. A newly developed modular photoreactor system utilising microstructured reactors was equipped with commercially available OLED panels. The technical feature of being a surface emitter, the low thickness and the potentially high luminescent efficiency give reason to expect this kind of light source to be well suited for photochemical reactions.

Loading of bacterial nanocellulose hydrogels with proteins using a high-speed technique.

For the loading of the natural biopolymer bacterial nanocellulose (BNC) with drugs, usually an adsorption method has been described. In the present study, a high-speed loading technique based on vortexing was established for the incorporation of proteins in BNC as drug delivery system. Compared to the conventional technique, vortexing accomplished in 10 min the same protein loading capacity as the adsorption method in 24h with comparable protein distribution and protein stability.

Novel process windows for enabling, accelerating, and uplifting flow chemistry.

Novel Process Windows make use of process conditions that are far from conventional practices. This involves the use of high temperatures, high pressures, high concentrations (solvent-free), new chemical transformations, explosive conditions, and process simplification and integration to boost synthetic chemistry on both the laboratory and production scale. Such harsh reaction conditions can be safely reached in microstructured reactors due to their excellent transport intensification properties.