Spatially and Time-Resolved Carrier Dynamics in Core-Shell InGaN/GaN Multiple-Quantum Wells on GaN Wire.

Time-resolved cathodoluminescence is a key tool with high temporal and spatial resolution. However, optical spectroscopic information can be also extracted using synchrotron pulses in a hard X-ray nanoprobe, exploiting a phenomenon called X-ray excited optical luminescence. Here, with 20 ps time resolution and 80 nm lateral resolution, we applied this time-resolved X-ray microscopy technique to individual core-shell InGaN/GaN multiple quantum well heterostructures deposited on GaN wires.

A helium mini-cryostat for the nanoprobe beamline ID16B at ESRF: characteristics and performance.

A helium mini-cryostat has been developed for the hard X-ray nanoprobe ID16B of the European Synchrotron to collect X-ray excited optical luminescence and X-ray fluorescence at low temperature (<10 K). The mini-cryostat has been specifically designed to fit within the strong space restrictions and high-demanding mechanical constraints imposed by the beamline to provide vibration-free operation and maximal thermal stability. This paper reports the detailed design, architecture and technical requirements of the mini-cryostat, and presents the first experimental data measured using the cryogenic equipment.

Nanoscale mapping of carrier collection in single nanowire solar cells using X-ray beam induced current.

Here it is demonstrated how nanofocused X-ray beam induced current (XBIC) can be used to quantitatively map the spatially dependent carrier collection probability within nanostructured solar cells. The photocurrent generated by a 50 nm-diameter X-ray beam was measured as a function of position, bias and flux in single p-i-n doped solar-cell nanowires. The signal gathered mostly from the middle segment decays exponentially toward the p- and n-segments, with a characteristic decay length that varies between 50 nm and 750 nm depending on the flux and the applied bias.

Nanobeam X-ray Fluorescence Dopant Mapping Reveals Dynamics of in Situ Zn-Doping in Nanowires.

The properties of semiconductors can be controlled using doping, making it essential for electronic and optoelectronic devices. However, with shrinking device sizes it becomes increasingly difficult to quantify doping with sufficient sensitivity and spatial resolution. Here, we demonstrate how X-ray fluorescence mapping with a nanofocused beam, nano-XRF, can quantify Zn doping within in situ doped III-V nanowires, by using large area detectors and high-efficiency focusing optics.

Spectrally resolved x-ray beam induced current in a single InGaP nanowire.

We demonstrate x-ray absorption fine structure spectroscopy (XAFS) detected by x-ray beam induced current (XBIC) in single n -i-n doped nanowire devices. Spatial scans with the 65 nm diameter beam show a peak of the XBIC signal in the middle segment of the nanowire. The XBIC and the x-ray fluorescence signals were detected simultaneously as a function of the excitation energy near the Ga K absorption edge at 10.

In operando x-ray imaging of nanoscale devices: Composition, valence, and internal electrical fields.

We introduce a method for directly imaging depletion layers in operando with elemental specificity and chemical speciation at sub-100 nm spatial resolution applicable to today's three-dimensional electronic architectures. These typically contain complex, multicomponent designs consisting of epitaxial heterostructures, buried domains, or nanostructures with different shapes and sizes. Although the variety of devices is immense, they commonly rely on carrier separation in a built-in potential induced by composition or strain gradients.

Thin-Wall GaN/InAlN Multiple Quantum Well Tubes.

Thin-wall tubes composed of nitride semiconductors (III-N compounds) based on GaN/InAlN multiple quantum wells (MQWs) are fabricated by metal-organic vapor-phase epitaxy in a simple and full III-N approach. The synthesis of such MQW-tubes is based on the growth of N-polar c-axis vertical GaN wires surrounded by a core-shell MQW heterostructure followed by in situ selective etching using controlled H/NH annealing at 1010 °C to remove the inner GaN wire part. After this process, well-defined MQW-based tubes having nonpolar m-plane orientation exhibit UV light near 330 nm up to room temperature, consistent with the emission of GaN/InAlN MQWs.

Silane-Induced N-Polarity in Wires Probed by a Synchrotron Nanobeam.

Noncentrosymmetric one-dimensional structures are key driving forces behind advanced nanodevices. Owing to the critical role of silane injection in creating nanosized architectures, it has become a challenge to investigate the induced local lattice polarity in single GaN wires. Thus, if axial and radial structures are well-grown by a silane-mediated approach, an ideal model to study their polar orientations is formed.

ID16B: a hard X-ray nanoprobe beamline at the ESRF for nano-analysis.

Within the framework of the ESRF Phase I Upgrade Programme, a new state-of-the-art synchrotron beamline ID16B has been recently developed for hard X-ray nano-analysis. The construction of ID16B was driven by research areas with major scientific and societal impact such as nanotechnology, earth and environmental sciences, and bio-medical research. Based on a canted undulator source, this long beamline provides hard X-ray nanobeams optimized mainly for spectroscopic applications, including the combination of X-ray fluorescence, X-ray diffraction, X-ray excited optical luminescence, X-ray absorption spectroscopy and 2D/3D X-ray imaging techniques.

Metal organic vapour-phase epitaxy growth of GaN wires on Si (111) for light-emitting diode applications.

GaN wires are grown on a Si (111) substrate by metal organic vapour-phase epitaxy on a thin deposited AlN blanket and through a thin SiNx layer formed spontaneously at the AlN/Si interface. N-doped wires are used as templates for the growth of core-shell InGaN/GaN multiple quantum wells coated by a p-doped shell. Standing single-wire heterostructures are connected using a metallic tip and a Si substrate backside contact, and the electroluminescence at room temperature and forward bias is demonstrated at 420 nm.

M-plane core-shell InGaN/GaN multiple-quantum-wells on GaN wires for electroluminescent devices.

Nonpolar InGaN/GaN multiple quantum wells (MQWs) grown on the {11-00} sidewalls of c-axis GaN wires have been grown by organometallic vapor phase epitaxy on c-sapphire substrates. The structural properties of single wires are studied in detail by scanning transmission electron microscopy and in a more original way by secondary ion mass spectroscopy to quantify defects, thickness (1-8 nm) and In-composition in the wells (∼16%). The core-shell MQW light emission characteristics (390-420 nm at 5 K) were investigated by cathodo- and photoluminescence demonstrating the absence of the quantum Stark effect as expected due to the nonpolar orientation.